scholarly journals Dimensionless Analysis of Segmented Constrained Layer Damping Treatments with Modal Strain Energy Method

2016 ◽  
Vol 2016 ◽  
pp. 1-16 ◽  
Author(s):  
Shitao Tian ◽  
Zhenbang Xu ◽  
Qingwen Wu ◽  
Chao Qin
Keyword(s):  
Shear Strain ◽  
Strain Field ◽  
Strain Energy ◽  
Design Parameters ◽  
Viscoelastic Layer ◽  
Constrained Layer Damping ◽  
Modal Strain Energy ◽  
Modal Strain Energy Method ◽  
Damping Treatments ◽  
Strain Energy Method

Constrained layer damping treatments promise to be an effective method to control vibration in flexible structures. Cutting both the constraining layer and the viscoelastic layer, which leads to segmentation, increases the damping efficiency. However, this approach is not always effective. A parametric study was carried out using modal strain energy method to explore interaction between segmentation and design parameters, including geometry parameters and material properties. A finite element model capable of handling treatments with extremely thin viscoelastic layer was developed based on interlaminar continuous shear stress theories. Using the developed method, influence of placing cuts and change in design parameters on the shear strain field inside the viscoelastic layer was analyzed, since most design parameters act on the damping efficiency through their influence on the shear strain field. Furthermore, optimal cut arrangements were obtained by adopting a genetic algorithm. Subject to a weight limitation, symmetric and asymmetric configurations were compared. It was shown that symmetric configurations always presented higher damping. Segmentation was found to be suitable for treatments with relatively thin viscoelastic layer. Provided that optimal viscoelastic layer thickness was selected, placing cuts would only be applicable to treatments with low shear strain level inside the viscoelastic layer.

Some Pitfalls of Simplified Modeling for Viscoelastic Sandwich Beams

2000 ◽  
Vol 122 (4) ◽  
pp. 434-439 ◽  
Author(s):  
Eric M. Austin ◽  
Daniel J. Inman
Keyword(s):  
Strain Energy ◽  
Large Range ◽  
Sandwich Beams ◽  
Constrained Layer Damping ◽  
Modal Strain Energy ◽  
Skew Distributions ◽  
Transverse Vibrations ◽  
Simplified Modeling ◽  
Damping Treatments

It is commonplace in academia to base models of constrained-layer damping treatments on the assumption that the facesheets displace identically during transverse vibrations. This assumption is valid for a large range of problems, particularly for problems common in the era when damping was achieved by applying foil-backed treatments to thin panels. The authors show using a very simple example that oversimplified modeling can skew distributions of modal strain energy, a common indicator of damping. [S0739-3717(00)00204-X]

Infrastructure Sustainability

2011 ◽  
pp. 186-201
Author(s):  
Hoi Wai Shih ◽  
David Thambiratnam ◽  
Tommy Chan
Keyword(s):  
Energy Method ◽  
Strain Energy ◽  
Health State ◽  
Modal Strain Energy ◽  
Structural Health ◽  
Modal Strain Energy Method ◽  
Modal Flexibility ◽  
Before And After ◽  
Composite Bridges ◽  
Strain Energy Method

Assessing the structural health state of urban infrastructure is crucial in terms of infrastructure sustainability. This chapter uses dynamic computer simulation techniques to apply a procedure using vibration-based methods for damage assessment in multiple-girder composite bridges. In addition to changes in natural frequencies, this multi-criteria procedure incorporates two methods, namely, the modal flexibility and the modal strain energy method. Using the numerically simulated modal data obtained through finite element analysis software, algorithms based on modal flexibility and modal strain energy change, before and after damage, are obtained and used as the indices for the assessment of structural health state. The feasibility and capability of the approach is demonstrated through numerical studies of a proposed structure with six damage scenarios. It is concluded that the modal strain energy method is capable of application to multiple-girder composite bridges, as evidenced through the example treated in this chapter.

Influence of Sandwich Damping on the Loss Factor of Multi-Plies Bellows

2010 ◽  
Vol 44-47 ◽  
pp. 2998-3002 ◽  
Author(s):  
Wei Ma ◽  
Yong Chao Lu ◽  
Yong Gang Liu ◽  
Ji Shun Li ◽  
Yu Jun Xue
Keyword(s):  
Finite Element ◽  
Loss Factor ◽  
Strain Energy ◽  
Vibration Isolation ◽  
Mechanical Performance ◽  
Finite Element Models ◽  
Modal Strain Energy ◽  
Modal Strain Energy Method ◽  
Thin Walled ◽  
Strain Energy Method

Multi-plies bellows is a kind of cylindrical thin-walled container with curved shape. It is effective in seal, energy storage and vibration isolation. In the paper, the modal loss factor of multi-plies bellows was analyzed based on the modal strain energy method. Then the finite element models of multi-piles bellows were given by ANSYS. The mechanical performance of bellows was analyzed in detail. The strain energy distribution of multi-plies bellows and viscoelsticity layer were given. According to the strain energy, the influence of sandwich damping on the loss factor was studied. The results show that the loss factor can be improved by employing the sandwich damping with big thickness and elastic modulus 200MPa.

Sign in / Sign up

Export Citation Format

Share Document