scholarly journals Numerical Analysis of Cu + Al 2 O 3 / H 2 O Hybrid Nanofluid of Streamwise and Cross Flow with Thermal Radiation Effect: Duality and Stability

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Sumera Dero ◽  
Liaquat Ali Lund ◽  
Zahir Shah ◽  
Ebenezer Bonyah ◽  
Wejdan Deebani
Keyword(s):  
Differential Equations ◽  
Thermal Radiation ◽  
Radiation Effect ◽  
Nonlinear Partial Differential Equations ◽  
Upper And Lower Solutions ◽  
Temporal Stability ◽  
Cross Flow ◽  
Hybrid Nanofluid ◽  
Thermal Layer ◽  
Thermal Radiation Effect

The motion of water conveying copper and aluminum nanoparticles on a heated moving sheet when thermal radiation and stretching/shrinking surface is significant and is investigated in this study to announce the increasing effects of volume fractions, thermal radiation, and moving parameters on this transport phenomenon. Furthermore, the flow of a Cu − Al 2 O 3 /water hybrid nanofluid across a heated moving sheet has been studied in both cross and streamwise directions. Thermal radiation effect is also considered, as this effect along with cross flow has not yet been investigated for the hybrid nanofluid in the published literature. Two distinct types of nanoparticles, namely, Al 2 O 3 (alumina) and Cu (copper), have been used to prepare hybrid nanofluid where water is considered as a base fluid. The system of nonlinear partial differential equations (PDEs) has been transferred to ordinary differential equations (ODEs) by compatible transformations before solving them by employing the III-stage Lobatto-IIIa method in bvp4c solver in MATLAB 2017 software. Temporal stability analysis has been carried out in order to verify stable branch between two branches by obtaining the smallest eigenvalue values. The branches obtained are addressed in depth against every applied parameter using figures and tables. The results show that there are three ranges of branches, no solution exists when λ > λ c , dual branches exist when 0.23 ≤ λ ≤ λ c , and a single solution exists when λ > 0.23 . Moreover, thermal layer thickness declines initially and then enhances in the upper and lower solutions for the higher values of the thermal radiation parameter.

Mixed convection flow of a hybrid nanofluid past a vertical wedge with thermal radiation effect

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Natalia C. Roșca ◽  
Alin V. Roșca ◽  
Ioan Pop
Keyword(s):  
Differential Equations ◽  
Mixed Convection ◽  
Thermal Radiation ◽  
Radiation Effect ◽  
Convection Flow ◽  
Hybrid Nanofluid ◽  
Mixed Convection Flow ◽  
Content Type ◽  
Thermal Radiation Effect ◽  
Vertical Wedge

Purpose The purpose of this paper is to numerically study the problem of mixed convection flow of a hybrid nanofluid past a vertical wedge with thermal radiation effect. Design/methodology/approach The governing nonlinear partial differential equations are transformed into a system of ordinary differential equations by a similarity transformation, which is then solved numerically through the function bvp4c from MATLAB for different values of the governing parameters. The solutions contain a mixed convection parameter λ that has a considerable impact on the flow fields. Findings It is found that the solutions of the ordinary (similarity) differential equations have two branches, upper and lower branch solutions, in a certain range of the mixed convection and several other parameters. To establish which of these solutions are stable and which are not, a stability analysis has been performed. The effects of the governing parameters on the fluid flow and heat transfer characteristics are illustrated in tables and figures. It is found that dual (upper and lower branch) solutions exist for both the cases of assisting and opposing flow situations. A stability analysis has also been conducted to determine the physical meaning and stability of the dual solutions. Practical implications This theoretical study is significantly relevant to the applications of the heat exchangers placed in a low-velocity environment and electronic devices cooled by fans. Originality/value The case of mixed convection flow of a hybrid nanofluid past a vertical wedge with thermal radiation effects has not been studied before, and hence all generated numerical results are claimed to be original and novel.

MHD and nonlinear thermal radiation effects on hybrid nanofluid past a wedge with heat source and entropy generation

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Fazle Mabood ◽  
Anum Shafiq ◽  
Waqar Ahmed Khan ◽  
Irfan Anjum Badruddin
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Heat Source ◽  
Thermal Radiation ◽  
Entropy Generation ◽  
Entropy Generation Rate ◽  
Design Parameters ◽  
Hybrid Nanofluid ◽  
Nonlinear Thermal Radiation ◽  
Content Type

Purpose This study aims to investigate the irreversibility associated with the Fe3O4–Co/kerosene hybrid-nanofluid past a wedge with nonlinear radiation and heat source. Design/methodology/approach This study reports the numerical analysis of the hybrid nanofluid model under the implications of the heat source and magnetic field over a static and moving wedge with slips. The second law of thermodynamics is applied with nonlinear thermal radiation. The system that comprises differential equations of partial derivatives is remodeled into the system of differential equations via similarity transformations and then solved through the Runge–Kutta–Fehlberg with shooting technique. The physical parameters, which emerges from the derived system, are discussed in graphical formats. Excellent proficiency in the numerical process is analyzed by comparing the results with available literature in limiting scenarios. Findings The significant outcomes of the current investigation are that the velocity field uplifts for higher velocity slip and magnetic strength. Further, the heat transfer rate is reduced with the incremental values of the Eckert number, while it uplifts with thermal slip and radiation parameters. An increase in Brinkmann’s number uplifts the entropy generation rate, while that peters out the Bejan number. The results of this study are of importance involving in the assessment of the effect of some important design parameters on heat transfer and, consequently, on the optimization of industrial processes. Originality/value This study is original work that reports the hybrid nanofluid model of Fe3O4–Co/kerosene.

scholarly journals MHD stagnation-point flow and heat transfer past a stretching/shrinking sheet in a hybrid nanofluid with induced magnetic field

2019 ◽  
Vol 30 (3) ◽  
pp. 1345-1364 ◽  
Author(s):  
Mohamad Mustaqim Junoh ◽  
Fadzilah Md Ali ◽  
Norihan Md Arifin ◽  
Norfifah Bachok ◽  
Ioan Pop
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Differential Equations ◽  
Stagnation Point ◽  
Nonlinear Partial Differential Equations ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Hybrid Nanofluid ◽  
Induced Magnetic Field ◽  
Content Type

Purpose The purpose of this paper is to investigate the steady magnetohydrodynamics (MHD) boundary layer stagnation-point flow of an incompressible, viscous and electrically conducting fluid past a stretching/shrinking sheet with the effect of induced magnetic field. Design/methodology/approach The governing nonlinear partial differential equations are transformed into a system of nonlinear ordinary differential equations via the similarity transformations before they are solved numerically using the “bvp4c” function in MATLAB. Findings It is found that there exist non-unique solutions, namely, dual solutions for a certain range of the stretching/shrinking parameters. The results from the stability analysis showed that the first solution (upper branch) is stable and valid physically, while the second solution (lower branch) is unstable. Practical implications This problem is important in the heat transfer field such as electronic cooling, engine cooling, generator cooling, welding, nuclear system cooling, lubrication, thermal storage, solar heating, cooling and heating in buildings, biomedical, drug reduction, heat pipe, space aircrafts and ships with better efficiency than that of nanofluids applicability. The results obtained are very useful for researchers to determine which solution is physically stable, whereby, mathematically more than one solution exist. Originality/value The present results are new and original for the problem of MHD stagnation-point flow over a stretching/shrinking sheet in a hybrid nanofluid, with the effect of induced magnetic field.

Sign in / Sign up

Export Citation Format

Share Document