scholarly journals Novel method for calculating installed capacity of stand-alone renewable energy systems

Author(s):  
Tang-Tin Dao ◽  
Q. S. Vu ◽  
Van-Duc Phan ◽  
Minh Tran

<span>The use of new energy sources to replace traditional energy sources is the worldwide interest based on its irrefutable advantages, especially in regions where supply systems Power supply cannot reach. The devices installed capacity has a significant effect on the economy as well as on system operation. In this paper, formulate and solve the problem of optimizing installed capacity for devices (generators, charge controllers, storage, inverters) that are used in independent renewable energy systems. In illustrating this method of calculation, we apply it on a standalone system, i.e., it is not connected to the power supply grid.</span>

Author(s):  
Radian Belu

The use of renewable energy sources is increasingly being pursued as a supplemental and an alternative to traditional energy generation. Several distributed energy systems are expected to a have a significant impact on the energy industry in the near future. As such, the renewable energy systems are presently undergoing a rapid change in technology and use. Such a feature is enabled clearly by power electronics. Both the solar-thermal and photovoltaic (PV) technologies have an almost exponential growth in installed capacity and applications. Both of them contribute to the overall grid control and power electronics research and advancement. Among the renewable energy systems, photovoltaic (PV) systems are the ones that make use of an extended scale of the advanced power electronics technologies. The specification of a power electronics interface is subject to the requirements related not only to the renewable energy source itself but also to its effects on the operations of the systems on which it is connected, especially the ones where these intermittent energy sources constitute a significant part of the total system capacity. Power electronics can also play a significant role in enhancing the performance and efficiency of PV systems. Furthermore, the use of appropriate power electronics enables solar generated electricity to be integrated into power grid. Aside from improving the quality of solar panels themselves, power electronics can provide another means of improving energy efficiency in PV and solar-thermal energy systems.


2015 ◽  
pp. 2016-2072
Author(s):  
Radian Belu

The use of renewable energy sources is increasingly being pursued as a supplemental and an alternative to traditional energy generation. Several distributed energy systems are expected to a have a significant impact on the energy industry in the near future. As such, the renewable energy systems are presently undergoing a rapid change in technology and use. Such a feature is enabled clearly by power electronics. Both the solar-thermal and photovoltaic (PV) technologies have an almost exponential growth in installed capacity and applications. Both of them contribute to the overall grid control and power electronics research and advancement. Among the renewable energy systems, photovoltaic (PV) systems are the ones that make use of an extended scale of the advanced power electronics technologies. The specification of a power electronics interface is subject to the requirements related not only to the renewable energy source itself but also to its effects on the operations of the systems on which it is connected, especially the ones where these intermittent energy sources constitute a significant part of the total system capacity. Power electronics can also play a significant role in enhancing the performance and efficiency of PV systems. Furthermore, the use of appropriate power electronics enables solar generated electricity to be integrated into power grid. Aside from improving the quality of solar panels themselves, power electronics can provide another means of improving energy efficiency in PV and solar-thermal energy systems.


Author(s):  
Troy V. Nguyen ◽  
Aldo Fabregas Ariza ◽  
Nicholas W. Miller ◽  
Ismael Cremer

Airports are key components of the global transportation system and are the subject of continuous sustainability improvements. Promoting clean energy sources and energy-efficient practices can help attain major sustainability goals at airports around the world. Although small airports are greater in number, most of the “sustainability” attention has been given to large airports. Small airports are typically located in rural areas, making them excellent candidates for renewable energy. This paper focuses on the planning and selection of renewable energy systems as a strategic method to reduce energy use and increase electric power reliability at small-scale airport facilities. The target system may use a combination of renewable energy sources to produce electrical power for the on-site facilities. The framework details include methods of energy collection, power production, and energy storage that are environmentally sound. A small airport serving a dual role as a flight training facility was used as case study. In the case study, systems engineering methodology was adapted to the small airport/ renewable energy domain in order to effectively identify stakeholders and elicit user requirements. These, coupled with industrial standards, relevant government regulations, and a priori constraints, are used to derive the initial requirements that serve as the basis for a preliminary design. The proposed framework also contains provisions for an on-site assessment of existing airport energy needs, sources, providers, and location-specific assets and challenges.


Author(s):  
Mykhailo Syvenko ◽  
Oleksandr Miroshnyk

A detailed substantiation of the use of electric energy storage devices in the presence of generators on renewable energy sources in the power supply system is given. The dependence of the storage parameters on the composition and priority of generation in the system is investigated. The solution of the problem of determining the parameters of electricity storage devices by means of purposeful simulation of generation parameters is considered. The results of the choice of power and capacity of the energy storage using technical and economic indicators are shown. Optimal parameters of electric energy storage devices as one of the most important means of ensuring the activity of isolated power supply systems together with selection of generating devices are determined. The results of calculations of capacity of renewable energy sources in isolated power supply systems in combination with classical energy sources are given. The necessity of using the principle of activity of the distribution electric network and the possibility of its realization is demonstrated. The optimal storage capacity as a function of the share of renewable generation, the non-integrated energy produced by renewable sources and the total storage capacity are plotted for several isolated systems. The main points of the used model of the power supply system of isolated networks are given. In the studied isolated power supply systems, wind power plants and solar power plants, which have significant unpredictability of generation, are used as generation based on renewable energy sources. The problem of undersupply of electricity to the grid by stepwise increase of generation is analysed. The results of the multi-step selection of power and energy consumption of electricity storage are determined by technical criteria.


2019 ◽  
pp. 36-41
Author(s):  
Kachan Yu ◽  
Kuznetsov V

Purpose. Identify the features of operation of wind farms as an auxiliary supplier of electricity for non-traction consumers of railway networks and analyze the main factors that directly affect the use of wind farms due to the random nature of wind flow and additional factors due to the above conditions in different climates. The research methodology is based on modern methods of computational mathematics, statistics and information analysis using modern computer technology. Findings. The need to use renewable energy sources in the power supply systems of non-traction consumers of railway transport is obvious. Given the constant growth of prices and tariffs for electricity in Ukraine, more and more attention is paid to its savings and the search for the cheapest and most affordable alternative sources. The authors consider issues related to the possibility of using additional generation of electricity in the power supply systems of railway transport through the use of wind turbines, including for non-traction consumers. The analysis of wind flow features in some regions of Ukraine was carried out, and the measurement of wind speed in Zaporizhia and Dnipropetrovsk regions was obtained with the help of a compact wind speed sensor manufactured by Micro-Step-MIS LLC (Russia). The obtained values of wind speed were recorded and stored digitally. The received information of the above device was processed. The authors conclude that in the case of using wind turbines as an additional power source in the networks of non-traction consumers of railway power supply systems it is economically advantageous to connect them directly to these networks and fully use all electricity produced by them, reducing its consumption from this power supply system. The originality is that the use of renewable energy sources in the power supply systems of non-traction consumers of railway transport, in particular wind turbines, is proposed. Practical implications. Introduction of wind power plants as an auxiliary supplier of electricity for non-traction consumers of railway power grids in order to minimize electricity costs. Keywords: renewable energy sources, quality of electric energy, wind power plant, power supply networks of railway transport, non-traction consumers of railway electric networks, electricity production, wind speed.


2019 ◽  
pp. 54-60
Author(s):  
Kachan Yuriy ◽  
Kuznetsov Vitaliy

Purpose. Describe the tools used by the authors for experimental research on the possibilities of using renewable energy sources in the power supply systems of non-traction consumers of railway transport. The methodology of research is based on modern methods of computational mathematics, statistics and information analysis using modern computer technology. Findings. To date, there is no comprehensive approach and specific reasonable measures for the introduction of re-newable energy sources in the energy supply of non-traction consumers. The article presents examples of the introduction of renewable energy sources in the power supply systems of railways abroad. It is noted that when using different renewable energy sources in the power supply systems of non-traction consumers, it is necessary to have a volume of statistical information to determine their technical and economic indicators. The classification of wind power plants with a horizontal axis is given. The schematic diagram and general view of the developed experimental wind power plant are given. The schematic diagram and general view of the developed experimental photovoltaic plant are given. The equipment used for research of wind flow and intensity of solar radiation in places of possible location of wind power or photovoltaic installations is considered. The presented experimental wind power and photovoltaic plants, which serve for a comprehensive study of the possibilities of using wind and solar sources in the power supply systems of non-traction consumers, are generalized and allow to clarify the necessary data for decision making. The originality is the introduction of renewable energy sources in the power supply system of non-traction consumers of railway transport. Practical implications. The use of additional renewable energy sources to supply non-traction consumers minimizes electricity consumption. Keywords: renewable energy sources, quality of electric energy, wind power plant, photovoltaic plant, power supply networks of railway transport, traction and non-traction consumers, electricity production


Sign in / Sign up

Export Citation Format

Share Document