scholarly journals Effect of Fluorine Doping on Structural and Optical Properties of SnO<sub>2</sub> Thin Films Prepared by Chemical Spray Pyrolysis Method

2016 ◽  
Vol 5 (4) ◽  
pp. 23 ◽  
Author(s):  
Nabeel A. Bakr
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Spray Pyrolysis ◽  
Spray Pyrolysis Method ◽  
Chemical Spray Pyrolysis ◽  
Fluorine Doping ◽  
Structural And Optical Properties ◽  
Pyrolysis Method ◽  
Chemical Spray

scholarly journals Structural and optical properties of CdS:Sn thin films prepared by chemical spray pyrolysis method

2019 ◽  
Vol 14 (29) ◽  
pp. 182-190
Author(s):  
Nadia Jasim Ghdeeb
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Spray Pyrolysis ◽  
Transition Energy ◽  
Spray Pyrolysis Method ◽  
Chemical Spray Pyrolysis ◽  
Structural And Optical Properties ◽  
Allowed Transition ◽  
Pyrolysis Method ◽  
Chemical Spray

CdS and CdS:Sn thin films were successfully deposited on glasssubstrates by spray pyrolysis method. The films were grown atsubstrate temperatures 300 C°. The effects of Sn concentration on thestructural and optical properties were studied.The XRD profiles showed that the films are polycrystalline withhexagonal structure grown preferentially along the (002) axis. Theoptical studies exhibit direct allowed transition. Energy band gapvary from 3.2 to 2.7 eV.

scholarly journals Preparation and study of the structural and optical properties of Bi2S3 thin films by Spray pyrolysis method

2017 ◽  
Vol 14 (1) ◽  
pp. 75-79
Author(s):  
Baghdad Science Journal
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Spray Pyrolysis ◽  
Energy Gap ◽  
Visible Spectrum ◽  
Spray Pyrolysis Method ◽  
Chemical Spray Pyrolysis ◽  
Structural And Optical Properties ◽  
Optical Energy Gap ◽  
Pyrolysis Method

In this research Bi2S3 thin films have been prepared on glass substrates using chemical spray pyrolysis method at substrate temperature (300oC) and molarity (0.015) mol. Structural and optical properties of the thin films above have been studied; XRD analysis demonstrated that the Bi2S3 films are polycrystalline with (031) orientation and with Orthorhombic structure. The optical properties were studied using the spectral of the absorbance and transmission of films in wavelength ranging (300-1100) nm. The study showed that the films have high transmission within the range of the visible spectrum. Also absorption coefficient, extinction coefficient and the optical energy gap (Eg) was calculated, found that the film have direct energy gap equal to 2.8 eV.

Structural and optical properties of Cu2ZnSnS4 thin films fabricated by chemical spray pyrolysis

2020 ◽  
Author(s):  
Sabreen A. Hameed ◽  
Nabeel Ali Bakr ◽  
AbdulSalam M. Hassan ◽  
Ahmed Nsaif Jasim
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Spray Pyrolysis ◽  
Chemical Spray Pyrolysis ◽  
Structural And Optical Properties ◽  
Chemical Spray

Epitaxial growth of high Tc superconducting Y‐Ba‐Cu‐O thin films on (001)MgO by a chemical spray pyrolysis method

1988 ◽  
Vol 64 (5) ◽  
pp. 2523-2526 ◽  
Author(s):  
J. J. Chu ◽  
R. S. Liu ◽  
J. H. Kung ◽  
P. T. Wu ◽  
L. J. Chen
Keyword(s):  
Thin Films ◽  
Spray Pyrolysis ◽  
Epitaxial Growth ◽  
Spray Pyrolysis Method ◽  
Chemical Spray Pyrolysis ◽  
High Tc ◽  
Pyrolysis Method ◽  
Chemical Spray

scholarly journals Structural and Optical Properties of CuO Thin Films Synthesized Using Spray Pyrolysis Method

Coatings ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 1392
Author(s):  
Oleksii Diachenko ◽  
Jaroslav Kováč ◽  
Oleksandr Dobrozhan ◽  
Patrik Novák ◽  
Jaroslav Kováč ◽  
...  
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Solar Cells ◽  
Copper Oxide ◽  
Spray Pyrolysis ◽  
High Surface ◽  
Production Costs ◽  
Spray Pyrolysis Method ◽  
Structural And Optical Properties ◽  
Pyrolysis Method

Copper oxide thin films were obtained using pulsating spray pyrolysis method. The morphological, structural, and optical properties of fabricated films were studied. X-ray analysis revealed that the CuO thin films are single-phase. The study of films morphology by SEM and AFM methods showed that the obtained films have a fairly high surface roughness and contain grains of different shapes and sizes. It was found that the obtained films of copper oxide have high values of the absorption coefficient, which confirms the possibility of their use as absorbing layers for solar cells. The obtained values of the optical band gap of the material are in the range from 1.45 eV to 1.60 eV. Raman spectroscopy revealed three modes A1g, B1g, and B2g, of the crystal structure of monoclinic CuO. The devices based on p-type copper oxide are promising for solar cells fabrication because they can reduce production costs, due to their low cost and inexpensive production methods compared to silicon solar cells fabrication.

Sign in / Sign up

Export Citation Format

Share Document