Type synthesis of 2R2T parallel mechanisms based on motion equivalent chain method

2014 ◽  
Vol 228 (17) ◽  
pp. 3209-3217 ◽  
Author(s):  
Wei Ye ◽  
Yuefa Fang ◽  
Sheng Guo ◽  
Haibo Qu
Keyword(s):  
Parallel Mechanism ◽  
Screw Theory ◽  
Parallel Mechanisms ◽  
Motion Pattern ◽  
Type Synthesis ◽  
Constraint Force ◽  
Single Loop ◽  
Loop Chain ◽  
Serial Chains

In this paper, the motion equivalent chain method is proposed and then applied to the type synthesis of a class of 2R2T parallel mechanism. The equivalent serial chains are synthesized for a specific 2R2T motion pattern based on screw theory. Feasible limb structures that provide a constraint couple and a constraint force are enumerated according to the reciprocity of the twist and wrench systems. Several motion equivalent single loop chains are constructed with the equivalent serial chains. Using motion equivalent single loop chains to replace the equivalent serial chains, a class of 2R2T parallel mechanisms is obtained based on the foundation of motion equivalent single loop chain structures.

Type Synthesis of 3-DOF Rotational Parallel Mechanisms With No Intersecting Axes

2012 ◽  
Author(s):  
Ziming Chen ◽  
Wen-ao Cao ◽  
Zhen Huang
Keyword(s):  
Parallel Mechanism ◽  
Screw Theory ◽  
Degree Of Freedom ◽  
Parallel Mechanisms ◽  
Type Synthesis ◽  
Constraint Force ◽  
New Approach ◽  
Spherical Parallel Mechanism ◽  
Rotational Motions

Parallel mechanisms which can realize three rotational motions are very important in the parallel mechanism family. Not the same with the traditional spherical parallel mechanism, a new kind of 3-DOF (degree of freedom) rotational parallel mechanism with no intersecting axes (RPMNIA) are proposed in this paper. This kind of rotational parallel mechanisms have the advantages of easy manufacturing. A new approach using the screw theory and the subchain theory is proposed to design the branches with only one constraint force and some new one-force-branches are found. Using these new branches, a group of 3-DOF rotational parallel mechanisms without intersecting axes are synthesized.

A Systematical Approach for Structure Synthesis of Parallel Mechanisms Based on Single-Open-Chain Modules and Its Application

2009 ◽  
Author(s):  
Ting-Li Yang ◽  
An-Xin Liu ◽  
Qiong Jin ◽  
Yu-Feng Luo ◽  
Lu-Bin Hang ◽  
...  
Keyword(s):  
Parallel Mechanism ◽  
Systematic Approach ◽  
Screw Theory ◽  
Parallel Mechanisms ◽  
Type Synthesis ◽  
Open Chain ◽  
Structure Synthesis ◽  
Vector Algebra ◽  
Algebra Theory ◽  
Position And Orientation

Based on previous research results presented by authors, this paper proposes a novel systematic approach for structure synthesis of all parallel mechanisms (excluding Bennett mechanism etc), which is totally different from the approaches based on screw theory and based on displacement subgroup. Main characteristics of this approach are: (a) the synthesized mechanisms are non-instantaneous ones, and (b) only simple mathematical tools (vector algebra, theory of sets, etc.) are used. Main steps of this approach include: (1) Determining functional and structural requirements of the parallel mechanism to be synthesized, such as position and orientation characteristic (POC) matrix, degree of freedom (DOF), etc. (2) Type synthesis of branches. (3) Assembling of branches (determining the geometry constraint conditions among the branches attached between the moving platform and the frame, and checking the DOF). (4) Identifying the inactive joints. (5) Selecting the actuating joints. In order to illustrate the whole procedure, the type synthesis of spherical parallel mechanisms is studied using this approach.

A class of reconfigurable parallel mechanisms with five-bar metamorphic linkage

2016 ◽  
Vol 231 (11) ◽  
pp. 2089-2099 ◽  
Author(s):  
Chunxu Tian ◽  
Yuefa Fang ◽  
Sheng Guo ◽  
Haibo Qu
Keyword(s):  
Potential Application ◽  
Degrees Of Freedom ◽  
Screw Theory ◽  
Parallel Mechanisms ◽  
Constraint Force ◽  
Motion Modes ◽  
Moving Platform ◽  
Five Phases ◽  
Serial Chains

This paper presents a planar five-bar metamorphic linkage which has five phases resulting from locking of motors. Reconfigurable limbs are constructed by integrating the five-bar metamorphic linage as sub-chains. The branch transition of metamorphic linkage is analyzed. By adding appropriate joints to the planer five-bar metamorphic linkage, reconfigurable limbs whose constraint can switch among no constraint, a constrained force and a constrained couple are obtained. Serial limb structures that can provide a constraint force and a constraint couple are synthesized based on screw theory. Reconfigurable limbs that have five configurations associated with the five phases of the five-bar metamorphic linkage are assembled with 4-DOF (degrees-of-freedom) serial chains. A class of reconfigurable parallel mechanisms is derived by connecting the moving platform to the base with three identical kinematic limbs. These parallel mechanisms can perform various output motion modes such as 3T, 3R, 2T1R, 1T2R, 3T1R, 2T2R, 1T3R, 2T3R, 3T2R and 3T3R. Finally, the potential application of the proposed mechanisms is analyzed and conclusions are drawn.

Type Synthesis of Parallel Mechanisms With Multiple Operation Modes

2006 ◽  
Author(s):  
Xianwen Kong ◽  
Cle´ment M. Gosselin ◽  
Pierre-Luc Richard
Keyword(s):  
Parallel Mechanism ◽  
Translational Motion ◽  
Parallel Mechanisms ◽  
Motion Pattern ◽  
Type Synthesis ◽  
Motion Patterns ◽  
Operation Modes ◽  
Multiple Operation ◽  
Spherical Motion ◽  
General Method

There are usually several motion patterns having the same DOF (degree of freedom). For example, planar motion, spherical motion, and spatial translation are motion patterns with 3-DOF. An f-DOF parallel mechanism with multiple operation modes is a parallel mechanism that can generate different motion patterns with f DOF. Up to now, no method has been proposed for the type synthesis of parallel mechanisms with multiple operation modes. This paper presents a general method for the type synthesis of parallel mechanisms with multiple operation modes. Using the proposed approach, 3-DOF parallel mechanisms with both spherical and translational modes, i.e., parallel mechanisms generating both the spherical motion pattern and the spatial translational motion pattern, are generated systematically. A large number of parallel mechanisms with both spherical and translational modes are obtained.

Type synthesis of 4-DOF nonoverconstrained parallel mechanisms based on screw theory

Robotica ◽  
2011 ◽  
Vol 30 (1) ◽  
pp. 31-37 ◽  
Author(s):  
Sheng Guo ◽  
Yuefa Fang ◽  
Haibo Qu
Keyword(s):  
Parallel Mechanism ◽  
Screw Theory ◽  
Research Topic ◽  
Parallel Mechanisms ◽  
Type Synthesis ◽  
Systematic Method ◽  
Constraint System

SUMMARYA systematic method is developed for the type synthesis of 4-DOF nonoverconstrained parallel mechanisms with three translations and one rotation inspired by the design of H-4. First, the motion requirements of primary platform and secondary platform of the 4-DOF nonoverconstrained parallel mechanisms are analyzed, and the conflict between the number of actuators and the constraint system for nonoverconstrained parallel mechanism is solved. Then, the research topic of type synthesis of 4-DOF nonoverconstrained parallel mechanisms is transformed into the type synthesis of the secondary platform with three translational DOF linked by two chains. On the basis of the screw and reciprocal theory, all possible secondary limbs with 3-DOF, 4-DOF, and 5-DOF are synthesized, respectively. Finally, the configurations and spatial assembly conditions of all possible secondary limbs are provided and some typical mechanisms are sketched as examples.

Type Synthesis of Parallel Mechanisms With Multiple Operation Modes

2006 ◽  
Vol 129 (6) ◽  
pp. 595-601 ◽  
Author(s):  
Xianwen Kong ◽  
Clément M. Gosselin ◽  
Pierre-Luc Richard
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Translational Motion ◽  
Parallel Mechanisms ◽  
Motion Pattern ◽  
Type Synthesis ◽  
Motion Patterns ◽  
Operation Modes ◽  
Multiple Operation ◽  
Spherical Motion

There are usually several motion patterns having the same degrees of freedom (DOF). For example, planar motion, spherical motion, and spatial translation are motion patterns with 3 DOF. An f-DOF parallel mechanism with multiple operation modes is a parallel mechanism that can generate different motion patterns with f DOF. Up to now, no method has been proposed for the type synthesis of parallel mechanisms with multiple operation modes. This paper presents a general method for the type synthesis of parallel mechanisms with multiple operation modes. Using the proposed approach, 3-DOF parallel mechanisms with both spherical and translational modes, i.e., parallel mechanism generating both a spherical motion pattern and a spatial translational motion pattern, are generated systematically. A large number of parallel mechanisms with both spherical and translational modes are obtained.

scholarly journals Type Synthesis of 1T2R Parallel Mechanisms Using Structure Coupling-Reducing Method

2019 ◽  
Vol 32 (1) ◽  
Author(s):  
Haitao Liu ◽  
Ke Xu ◽  
Huiping Shen ◽  
Xianlei Shan ◽  
Tingli Yang
Keyword(s):  
Explicit Form ◽  
Parallel Mechanism ◽  
Analytic Solutions ◽  
Forward Kinematics ◽  
Parallel Mechanisms ◽  
Type Synthesis ◽  
Real Time Control ◽  
Time Control ◽  
Topological Characteristics ◽  
Zero Coupling

Abstract Direct kinematics with analytic solutions is critical to the real-time control of parallel mechanisms. Therefore, the type synthesis of a mechanism having explicit form of forward kinematics has become a topic of interest. Based on this purpose, this paper deals with the type synthesis of 1T2R parallel mechanisms by investigating the topological structure coupling-reducing of the 3UPS&UP parallel mechanism. With the aid of the theory of mechanism topology, the analysis of the topological characteristics of the 3UPS&UP parallel mechanism is presented, which shows that there are highly coupled motions and constraints amongst the limbs of the mechanism. Three methods for structure coupling-reducing of the 3UPS&UP parallel mechanism are proposed, resulting in eight new types of 1T2R parallel mechanisms with one or zero coupling degree. One obtained parallel mechanism is taken as an example to demonstrate that a mechanism with zero coupling degree has an explicit form for forward kinematics. The process of type synthesis is in the order of permutation and combination; therefore, there are no omissions. This method is also applicable to other configurations, and novel topological structures having simple forward kinematics can be obtained from an original mechanism via this method.

scholarly journals A New Method for Type Synthesis of 2R1T and 2T1R 3-DOF Redundant Actuated Parallel Mechanisms with Closed Loop Units

2020 ◽  
Vol 33 (1) ◽  
Author(s):  
Yongquan Li ◽  
Yang Zhang ◽  
Lijie Zhang
Keyword(s):  
Closed Loop ◽  
Screw Theory ◽  
Line Graph ◽  
Degree Of Freedom ◽  
Parallel Mechanisms ◽  
Type Synthesis ◽  
Allocation Criteria ◽  
Grassmann Line Geometry ◽  
Moving Platform ◽  
Atlas Method

Abstract The current type synthesis of the redundant actuated parallel mechanisms is adding active-actuated kinematic branches on the basis of the traditional parallel mechanisms, or using screw theory to perform multiple getting intersection and union to complete type synthesis. The number of redundant parallel mechanisms obtained by these two methods is limited. In this paper, based on Grassmann line geometry and Atlas method, a novel and effective method for type synthesis of redundant actuated parallel mechanisms (PMs) with closed-loop units is proposed. Firstly, the degree of freedom (DOF) and constraint line graph of the moving platform are determined successively, and redundant lines are added in constraint line graph to obtain the redundant constraint line graph and their equivalent line graph, and a branch constraint allocation scheme is formulated based on the allocation criteria. Secondly, a scheme is selected and redundant lines are added in the branch chains DOF graph to construct the redundant actuated branch chains with closed-loop units. Finally, the branch chains that meet the requirements of branch chains configuration criteria and F&C (degree of freedom & constraint) line graph are assembled. In this paper, two types of 2 rotational and 1 translational (2R1T) redundant actuated parallel mechanisms and one type of 2 translational and 1 rotational (2T1R) redundant actuated parallel mechanisms with few branches and closed-loop units were taken as examples, and 238, 92 and 15 new configurations were synthesized. All the mechanisms contain closed-loop units, and the mechanisms and the actuators both have good symmetry. Therefore, all the mechanisms have excellent comprehensive performance, in which the two rotational DOFs of the moving platform of 2R1T redundant actuated parallel mechanism can be independently controlled. The instantaneous analysis shows that all mechanisms are not instantaneous, which proves the feasibility and practicability of the method.

Position and Orientation Characteristic Equation for Topological Design of Parallel Mechanisms

2008 ◽  
Author(s):  
Ting-Li Yang ◽  
An-Xin Liu ◽  
Qiong Jin ◽  
Yu-Feng Luo ◽  
Hui-Ping Shen ◽  
...  
Keyword(s):  
Topological Structure ◽  
Parallel Mechanism ◽  
Screw Theory ◽  
Parallel Mechanisms ◽  
Output Link ◽  
Geometrical Meaning ◽  
Operation Rules ◽  
The Matrix ◽  
Position And Orientation ◽  
Symbolic Operation

This paper presents the explicit mapping relations between topological structure of parallel mechanism and position and orientation characteristic (in short, POC) of its motion output link. It deals with: (1) The symbolic representation and the invariant of topological structure of mechanism; (2) The matrix representation of POC of motion output link; (3) The POC equations of parallel mechanism and its symbolic operation rules. The symbolic operation involves simple mathematic tools and fewer operation rules, and has clear geometrical meaning. So, it is easy to use. The forward operation of the POC equations can be used for structural analysis; its inverse operation can be used for structural synthesis. The method proposed in this paper is totally different from the methods based on screw theory and based on displacement subgroup.

Sign in / Sign up

Export Citation Format

Share Document