Lower limb exoskeleton robots’ dynamics parameters identification based on improved beetle swarm optimization algorithm

Efficient and high-precision identification of dynamic parameters is the basis of model-based robot control. Firstly, this paper designed the structure and control system of the developed lower extremity exoskeleton robot. The dynamics modeling of the exoskeleton robot is performed. The minimum parameter set of the identified parameters is determined. The dynamic model is linearized based on the parallel axis theory. Based on the beetle antennae search algorithm (BAS) and particle swarm optimization (PSO), the beetle swarm optimization algorithm (BSO) was designed and applied to the identification of dynamic parameters. The update rule of each particle originates from BAS, and there is an individual’s judgment on the environment space in each iteration. This method does not rely on the historical best solution in the PSO and the current global optimal solution of the individual particle, thereby reducing the number of iterations and improving the search speed and accuracy. Four groups of test functions with different characteristics were used to verify the performance of the proposed algorithm. Experimental results show that the BSO algorithm has a good balance between exploration and exploitation capabilities to promote the beetle to move to the global optimum. Besides, the test was carried out on the exoskeleton dynamics model. This method can obtain independent dynamic parameters and achieve ideal identification accuracy. The prediction result of torque based on the identification method is in good agreement with the ideal torque of the robot control.

Dynamic logarithmic state and control quantization for continuous-time linear systems

This paper addresses logarithmic quantizers with dynamic sensitivity design for continuous-time linear systems with a quantized feedback control law. The dynamics of state quantization and control quantization sensitivities during “zoom-in”/“zoom-out” stages are proposed. Dwell times of the dynamic sensitivities are co-designed. It is shown that with the proposed algorithm, a single-input continuous-time linear system can be stabilized by quantized feedback control via adopting sensitivity varying algorithm under certain assumptions. Also, the advantage of logarithmic quantization is sustained while achieving stability. Simulation results are provided to verify the theoretical analysis.

Traded and combined cooperative control of a smart wheelchair

This article deals with a human–machine cooperative system for the control of a smart wheelchair for people with motor disabilities. The choice of a traded control mode is first argued. The paper then pursues two objectives. The first is to describe the design of the cooperative system by focusing on the dialogue and the interaction between the pilot and the robot. The second objective is to introduce a new cooperative mode. In this one, three features are proposed: two semi-autonomous features, a wall following and a doorway crossing, during which the user can intervene punctually to rectify a trajectory or a path, and an assisted mode where, conversely, the machine intervenes in a manual control to avoid obstacles. This mode of intervention of an entity, human or machine, supervising a movement controlled by the other is referred as “combined control.” Examples of scenarios exploiting the cooperative capabilities of the system are presented and discussed.

Trajectory planning of a 4-RR(SS)2 high-speed parallel robot

The trajectory-planning method for a novel 4-degree-of-freedom high-speed parallel robot is studied herein. The robot’s motion mechanism adopts RR(SS)2 as branch chains and has a single moving platform structure. Compared with a double moving platform structure, the proposed parallel robot has better acceleration and deceleration performance since the mass of its moving platform is lighter. An inverse kinematics model of the mechanism is established, and the corresponding relationship between the motion parameters of the end-moving platform and the active arm with three end-motion laws is obtained, followed by the optimization of the motion laws by considering the motion laws’ duration and stability. A Lamé curve is used to transition the right-angled part of the traditional gate trajectory, and the parameters of the Lamé curve are optimized to achieve the shortest movement time and minimum acceleration peak. A method for solving Lamé curve trajectory interpolation points based on deduplication optimization is proposed, and a grasping frequency experiment is conducted on a robot prototype. Results show that the grasping frequency of the optimized Lamé curve prototype can be increased to 147 times/min, and its work efficiency is 54.7% higher than that obtained using the traditional Adept gate-shaped trajectory.

Dynamic path planning over CG-Space of 10DOF Rover with static and randomly moving obstacles using RRT* rewiring

Dynamic path planning is a core research content for intelligent robots. This paper presents a CG-Space-based dynamic path planning and obstacle avoidance algorithm for 10 DOF wheeled mobile robot (Rover) traversing over 3D uneven terrains. CG-Space is the locus of the center of gravity location of Rover while moving on a 3D terrain. A CG-Space-based modified RRT* samples a random space tree structure. Dynamic rewiring this tree can handle the randomly moving obstacles and target in real time. Simulations demonstrate that the Rover can obtain the target location in 3D uneven dynamic environments with fixed and randomly moving obstacles.

Motion generation for walking exoskeleton robot using multiple dynamic movement primitives sequences combined with reinforcement learning

In order to assist patients with lower limb disabilities in normal walking, a new trajectory learning scheme of limb exoskeleton robot based on dynamic movement primitives (DMP) combined with reinforcement learning (RL) was proposed. The developed exoskeleton robot has six degrees of freedom (DOFs). The hip and knee of each artificial leg can provide two electric-powered DOFs for flexion/extension. And two passive-installed DOFs of the ankle were used to achieve the motion of inversion/eversion and plantarflexion/dorsiflexion. The five-point segmented gait planning strategy is proposed to generate gait trajectories. The gait Zero Moment Point stability margin is used as a parameter to construct a stability criteria to ensure the stability of human-exoskeleton system. Based on the segmented gait trajectory planning formation strategy, the multiple-DMP sequences were proposed to model the generation trajectories. Meanwhile, in order to eliminate the effect of uncertainties in joint space, the RL was adopted to learn the trajectories. The experiment demonstrated that the proposed scheme can effectively remove interferences and uncertainties.

Estimated path information gain-based robot exploration under perceptual uncertainty

At present, the frontier-based exploration has been one of the mainstream methods in autonomous robot exploration. Among the frontier-based algorithms, the method of searching frontiers based on rapidly exploring random trees consumes less computing resources with higher efficiency and performs well in full-perceptual scenarios. However, in the partially perceptual cases, namely when the environmental structure is beyond the perception range of robot sensors, the robot often lingers in a restricted area, and the exploration efficiency is reduced. In this article, we propose a decision-making method for robot exploration by integrating the estimated path information gain and the frontier information. The proposed method includes the topological structure information of the environment on the path to the candidate frontier in the frontier selection process, guiding the robot to select a frontier with rich environmental information to reduce perceptual uncertainty. Experiments are carried out in different environments with the state-of-the-art RRT-exploration method as a reference. Experimental results show that with the proposed strategy, the efficiency of robot exploration has been improved obviously.

An obstacle-avoiding and stiffness-tunable modular bionic soft robot

The aim of this work is to design and model a novel modular bionic soft robot for crawling and crossing obstacles. The modular bionic soft robot is composed of several serial driving soft modules, each module is composed of two parallel soft actuators. By analyzing the influence of working pressure and manufacturing size on the stiffness of the modular bionic soft robot, the nonlinear variable stiffness model of the modular bionic soft robot is established. Based on this model, the spatial states and design parameters of the modular bionic soft robot are discussed when the modular bionic soft robot can pass through the obstacle. Experiments show that when the inflation air pressure of the modular bionic soft robot is 70 kPa, its speed can reach 7.89 mm/s and the height of obstacles passed by it can reach 42.8 mm. The feasibility of the proposed modular bionic soft robot and nonlinear variable stiffness model is verified by locomotion experiments.