Contemporary management of an orthodontic-orthognathic patient with limited time availability in an orthodontic office setting: Case report

2020 ◽  
Vol 47 (3) ◽  
pp. 257-264
Author(s):  
Chung How Kau ◽  
Zhendong Wang ◽  
Jue Wang ◽  
Deepak G Krishnan

Introduction: This case report describes the treatment of a 21-year-old man who presented in an orthodontic office for treatment but lived in a city 100 miles away and wanted the orthognathic surgery in another state in America. The patient presented with an anterior open bite and skeletal Class III relationship. Methods: The treatment plan included: (1) effective and careful communication of the treatment plan with the patient, orthodontist and oral and maxillofacial surgeon; (2) pre-surgical alignment and levelling of the teeth in both arches with Invisalign; (3) a long-distance communication between the orthodontist and the surgeon for surgical plan with virtual surgical planning (VSP Orthognathics; 3D Systems, www.3Dsystem.com ) online; (4) maxillary advancement (LeFort I osteotomy) with mandibular set-back (bilateral sagittal split osteotomy); (5) postsurgical correction of the malocclusion with clear brackets and aligners; and (6) retention and final small tooth movement adjustments with aligners/clear retainers. Results: The anterior open bite was treated, crowding was eliminated in the upper and lower anterior segment, correction of skeletal and dental Class III malocclusion was obtained, mandibular plane angle was reduced and facial profile improved. Conclusions: The results suggest that aesthetic and functional results can be achieved with long-distance communication of two specialties and with the combined use of clear aligners and clear fixed appliances.

2021 ◽  
Author(s):  
Yiruo He ◽  
Yangyang Wang ◽  
Xinghai Wang ◽  
Jiangyue Wang ◽  
Ding Bai ◽  
...  

ABSTRACT Treatment of hyperdivergent skeletal Class III malocclusion is challenging for orthodontists, and orthognathic-orthodontic treatment is usually required. This report presents the successful nonsurgical treatment of a 20-year-old man who had a skeletal Class III malocclusion with anterior open bite, anterior and posterior crossbite, hyperdivergent growth pattern, steep occlusal plane, early loss of three first molars, and an uncommon convex profile with a retruded chin. An orthodontic camouflage treatment plan was chosen based on the etiology and the patient's complaints. Tooth #37 was extracted. Miniscrews were used for uprighting and intruding of the lower molars, distalization of the lower dentition, and flattening of the occlusal plane. After 34 months of active treatment, Class I relationships, proper anterior overjet and overbite, flat occlusal plane, and an esthetic facial profile were achieved. The results demonstrated that the biomechanics involved in the nonsurgical treatment assisted with miniscrews to distalize the mandibular dentition and flatten the occlusal plane while keeping the mandibular plane stable was effective for treating this hyperdivergent skeletal Class III patient with a convex profile and anterior open bite.


2021 ◽  
Vol 14 (54) ◽  
pp. 26-31
Author(s):  
Nivaldo Antônio Bernardo de Oliveira ◽  
Ney Tavares Lima Neto ◽  
Guaracy Lyra da Fonseca Junior ◽  
Gurgiane Rodrigues Gurgel Cavalcante ◽  
Luiz Felipe Azevedo ◽  
...  

Anterior open bite is a type of malocclusion in which there is the presence of a negative vertical overlap between the incisal edges of the upper and lower anterior teeth. It is considered a complex anomaly with distinct characteristics and difficult to treat with prevalence of 25% to 38% of patients orthodontically treated. The aim of this article is to report a clinical case of Class III right subdivision and open bite using 3DBOT technique, a fixed, comfortable, predictable, imperceptible technique with 3D technology and with extreme clinically proven satisfaction. Case report: Patient V.B.V.S., 23 years and 1 month old, leukoderma, male, mild dholico, straight profile, symmetrical, Class ¼ of Class III of molar and canine right subdivision, anterior open bite, inverted smile, mild upper and anterior dental crowding. Treatment plan: The use of 3DBOT was planned along with the use of intermaxillary elastics and refinement with the aid of MyAligner® aligners. Conclusion: The 3DBOT technique showed to be a viable option for treating anterior open bite


2020 ◽  
Vol 8 (3) ◽  
pp. 75 ◽  
Author(s):  
Tarek El-Bialy

Adult orthodontic patients with skeletal Class III malocclusion, open bite and bimaxillary dentoalveolar protrusion are complex problems that normally require surgical intervention to correct. This is a report of an adult female with a skeletal Class III jaw relationship; in addition, the patient had anterior open bite and bimaxillary dentoalveolar protrusion. The patient also had three premolars in the lower left quadrant. Treatment involved extracting the extra premolar distal to lower left canine, retraction of lower anterior teeth, closing extraction space and anterior open bite utilizing Invisalign clear aligners. The patient initially changed aligners every week before this was changed to 3–5 days after starting to use a high frequency vibration (HFV = 120 Hz) device. Satisfactory results were achieved in a relatively shorter period. Comparing before and after treatment cone beam computed tomography revealed that new bone has been formed labial to the lower incisors after their retraction/correction of their initial proclined position and the use of HFV and myofunctional therapy without gingival graft. The present case report shows the comprehensive multidisciplinary team approach in treatment for such cases and the advantage of using HFV to improve bone formation.


2021 ◽  
Vol 32 (3) ◽  
pp. 120
Author(s):  
William Suryajaya ◽  
Haru Setyo Anggani

Pendahuluan: Perawatan ortodonti kamuflase adalah perawatan untuk menyamarkan diskrepansi skeletal dengan mengubah posisi dan angulasi gigi-gigi pada lengkung rahang. Perawatan tersebut merupakan perawatan yang dapat dipilih selain bedah ortognatik bagi kasus maloklusi skeletal kelas III pada pasien dewasa. Maloklusi skeletal kelas III sering pula disertai dengan keadaan lain seperti gigitan terbuka anterior yang menambah kompleksitas modalitas perawatan. Tujuan laporan kasus ini untuk menjelaskan pilihan modalitas perawatan pasien maloklusi skeletal kelas III secara kamuflase ortodonti. Laporan kasus: Pasien wanita usia 19 tahun 2 bulan datang ke klinik Ortodonti RSGM FKG UI dengan keluhan gigi atas depan tidak teratur dan gigi depan atas dan bawah tidak bertemu. Diagnosis menunjukkan pola skeletal kelas III dengan posisi maksila dan mandibula terhadap basis cranii retrognati (SNA 73°, SNB 74°, ANB -1°)  disertai dengan crowding sedang dan gigitan terbuka anterior. Tipe wajah pasien dolikofasial, simetris dan seimbang. Profil jaringan lunak dan skeletal cekung. Kasus ini dirawat dengan pendekatan ortodonti kamuflase tanpa pencabutan menggunakan piranti cekat standar Edgewise untuk mengoreksi crowding pada lengkung gigi atas dan bawah serta gigitan terbuka pada regio anterior. Perawatan ortodonti selesai dalam waktu 13 bulan dan crowding pada lengkung gigi atas dan bawah serta gigitan terbuka pada regio anterior telah terkoreksi. Simpulan: Perawatan ortodonti kamuflase pada maloklusi kelas III skeletal dengan gigitan terbuka anterior ringan merupakan pilihan perawatan yang cukup baik karena dapat mengoreksi maloklusi dengan kompensasi dentoalveolar sehingga diperoleh oklusi yang baik dan stabil. Hasil perawatan menunjukan hasil yang cukup baik dan dapat diterima oleh pasien.Kata kunci: Maloklusi skeletal kelas III, crowding, open-bite anterior, standar edgewise, ortodonti kamuflase. ABSTRACTIntroduction: Orthodontic camouflage is a treatment to disguise skeletal discrepancies by changing the teeth position and angulation in the jaw arch. This treatment is an option other than orthognathic surgery for skeletal class III malocclusion in adult patients. Skeletal class III malocclusion is often accompanied by other conditions such as an anterior open-bite which adds the complexity of the treatment modality. This case report was aimed to describe the choice of treatment modality for skeletal class III malocclusion patients by orthodontic camouflage. Case report: A female patient aged 19 years and two months came to the Orthodontic Clinics at the Faculty of Dentistry of University of Indonesia Dental Hospital (RSGM FKG UI) with complaints of irregular maxillary anterior teeth, and the maxillary and mandibular anterior teeth did not overlap. The diagnosis showed a skeletal class III pattern with the maxillary and mandibular position against the retrognathic cranii base (SNA 73°, SNB 74°, ANB -1°) accompanied by moderate crowding and anterior open-bite. The patient’s face type is dolichofacial, symmetrical and balanced, with the concave soft and skeletal tissue profiles. This case was treated with a non-extraction camouflage orthodontic approach using the standard edgewise fixed appliance to correct crowding in the maxillary and mandibular dental arches and open-bite in the anterior region. The orthodontic treatment was completed within 13 months, and crowding in the maxillary and mandibular dental arches and open-bite in the anterior region were corrected. Conclusion: Camouflage orthodontic treatment is a good treatment option for skeletal class III malocclusion with a mild anterior open-bite because it can correct malocclusion with dentoalveolar compensation to obtain a good and stable occlusion. The treatment results show good results and can be accepted well by the patient.Keywords: Skeletal class III malocclusion, crowding, anterior open-bite, standard edgewise, orthodontic camouflage.


2020 ◽  
Vol 10 (1) ◽  
pp. 1-11
Author(s):  
So-Hyun Kim ◽  
Nam-Ki Lee ◽  
Young-Kyun Kim ◽  
Tae-Hyun Choi

Author(s):  
Vo Truong Nhu Ngoc ◽  
Nguyen Thi Thu Phuong ◽  
Nguyen Viet Anh

A skeletal Class III malocclusion with open bite tendency is considered very difficult to treat orthodontically without surgery. This case report describes the lingual orthodontic treatment of an adult skeletal Class III patient with mandibular deviation to the left side, lateral open bite, unilateral posterior crossbite, zero overbite and negative overjet. The lower incisors were already retroclined to compensate with the skeletal discrepancy. The patient was treated by asymmetric molar extraction in the mandibular arch to retract the lower incisors and correct the dental midline, with the help of intermaxillary elastics. Lingual appliance was used with over-torqued lower anterior teeth’s brackets to control the torque of mandibular incisors. After a 30-month treatment, satisfactory smile and facial esthetics and good occlusion was achieved. A 12-month follow-up confirmed that the outcome was stable. Asymmetric molar extraction could be a viable option to retract mandibular incisors in Class III malocclusion with lower dental midline deviation.


2012 ◽  
Vol 39 (3) ◽  
pp. 212-223 ◽  
Author(s):  
Milton Meri Benitez Farret ◽  
Marcel Marchiori Farret ◽  
Alessandro Marchiori Farret

2021 ◽  
Vol 24 (2) ◽  
Author(s):  
Matheus Pithon ◽  
Luiz Antonio Bernardes

The present case report describes a conservative and uncommon treatment for class III malocclusion in a woman growing patient with aged eight years and four months. An unconventional treatment modality was used for the treatment of this malocclusion, reverse-pull headgear and distalisation of lower teeth using mandibular cervical headgear in the lower arch. At the end of the treatment (after 33 months), there was correction of the transversal and sagittal occlusal relationship between maxilla and mandible and correct dental intercuspation. Keywords Class III malocclusion; Open-bite; Orthodontics.


2011 ◽  
Vol 05 (01) ◽  
pp. 121-129 ◽  
Author(s):  
Demet Kaya ◽  
Tulin Ugur Taner

ABSTRACTThe aim of this case report was to present the orthodontic treatment of an adult with spaced dentition, Class III malocclusion, and open-bite tendency. A 28.4-year-old adult woman was concerned about the unesthetic appearance of her spaced dentition localized at both upper and lower arches while smiling. She had a mild tongue thrust, hypertropic upper frenum, and mild speech difficulty while pronouncing “s”. Her profile was straight with prominent lips. Molar relationship was Class III on both sides. Anterior teeth were in an end-to-end relationship. Lower dental midline was deviated to the left side. Cephalometric analysis revealed a skeletal Class III relationship with hyperdivergent facial pattern. The treatment plan included myotherapeutic exercises for the tongue thrust habit and a diagnostic set-up for closure of diastemas. A strict retention protocol was followed combined with gingivoplasty, fiberotomy, and frenectomy procedures. All spaces were closed successfully, adequate overbite and overjet relationships were obtained, and tongue thrust habit and speech difficulty while pronouncing “s” were eliminated. Clinical and cephalometric results indicated the maintenance of the treatment outcome at 6-months post-retention period. (Eur J Dent 2011;5:121-129)


Author(s):  
SN Rita ◽  
SMA Sadat ◽  
MZ Hossain

Reported case of a 19 years old male, with Class III malocclusion, bilateral cross bite associated with anterior open bite, which was treated by fixed orthodontic treatment. After treatment there was a class I Molar and incisor relation as well as the open bite was corrected with accepted aesthetic and functional satisfaction of the patient. DOI: http://dx.doi.org/10.3329/bjodfo.v1i1.15974 Ban J Orthod & Dentofac Orthop, October 2010; Vol-1, No.1, 22-23


Sign in / Sign up

Export Citation Format

Share Document