3-D seismic evidence of the effects of carbonate karst collapse on overlying clastic stratigraphy and reservoir compartmentalization

Geophysics ◽  
1996 ◽  
Vol 61 (5) ◽  
pp. 1336-1350 ◽  
Author(s):  
B. A. Hardage ◽  
D. L. Carr ◽  
D. E. Lancaster ◽  
J. L. Simmons ◽  
R. Y. Elphick ◽  
...  

A multidisciplinary team, composed of stratigraphers, petrophysicists, reservoir engineers, and geophysicists, studied a portion of Boonsville gas field in the Fort Worth Basin of north‐central Texas to determine how modern geophysical, geological, and engineering techniques can be combined to understand the mechanisms by which fluvio‐deltaic depositional processes create reservoir compartmentalization in a low‐ to moderate‐accommodation basin. An extensive database involving well logs, cores, production, and pressure data from more than 200 wells, [Formula: see text] [Formula: see text] of 3-D seismic data, vertical seismic profiles (VSPs), and checkshots was assembled to support this investigation. We found the most important geologic influence on stratigraphy and reservoir compartmentalization in this basin to be the existence of numerous karst collapse chimneys over the [Formula: see text] [Formula: see text] area covered by the 3-D seismic grid. These near‐vertical karst collapses originated in, or near, the deep Ordovician‐age Ellenburger carbonate section and created vertical chimneys extending as high as 2500 ft (610 m) above their point of origin, causing significant disruptions in the overlying clastic strata. These karst disruptions tend to be circular in map view, having diameters ranging from approximately 500 ft (150 m) to as much as 3000 ft (915 m) in some cases. Within our study area, these karst features were spaced 2000 ft (610 m) to 6000 ft (1830 m) apart, on average. The tallest karst collapse zones reached into the Middle Pennsylvanian Strawn section, which is some 2500 ft (760 m) above the Ellenburger carbonate where the karst generation began. We used 3-D seismic imaging to show how these karst features affected the strata above the Ellenburger and how they have created a well‐documented reservoir compartment in the Upper Caddo, an upper Atoka valley‐fill sandstone that typically occurs 2000 ft (610 m) above the Ellenburger. By correlating these 3-D seismic images with outcrops of Ellenburger karst collapses, we document that the physical dimensions (height, diameter, cross‐sectional area) of the seismic disruptions observed in the 3-D data equate to the karst dimensions seen in outcrops. We also document that this Ellenburger carbonate dissolution phenomenon extends over at least 500 mi (800 km), and by inference we suggest karst models like we describe here may occur in any basin that has a deep, relatively thick section of Paleozoic carbonates that underlie major unconformities.

Geophysics ◽  
1997 ◽  
Vol 62 (6) ◽  
pp. 1996-1998
Author(s):  
Miodrag M. Roksandić

The paper deals with the results of a multidisciplinary study of the Bend Conglomerate (Middle Pennsylvanian fluvio‐deltaic clastics) in a portion of Boonsville gas field in the Fort Worth Basin of North‐Central Texas, especially with those related to the Caddo sequence, at the top of the Bend Conglomerate. The purpose of the study was “to determine how modern geophysical, geological, and engineering techniques could be combined to understand the mechanisms by which fluvio‐deltaic depositional processes create reservoir compartmentalization in a low‐ to moderate‐accommodation basin.” According to Hardage et al. (1996), complexly arranged key chronostratigraphic surfaces are major controls on compartmentalization and architecture of reservoirs. These key chronostratigraphic surfaces are flooding surfaces, maximum flooding surfaces, and erosion surfaces.


2005 ◽  
Vol 53 (5) ◽  
pp. 689-703 ◽  
Author(s):  
Alberto Malinverno ◽  
W. Scott Leaney

Geophysics ◽  
1996 ◽  
Vol 61 (5) ◽  
pp. 1351-1362 ◽  
Author(s):  
B. A. Hardage ◽  
D. L. Carr ◽  
D. E. Lancaster ◽  
J. L. Simmons ◽  
D. S. Hamilton ◽  
...  

A multidisciplinary team, composed of stratigraphers, petrophysicists, reservoir engineers, and geophysicists, studied a portion of Boonsville gas field in the Fort Worth Basin of North‐Central Texas to determine how modern geophysical, geological, and engineering techniques could be combined to understand the mechanisms by which fluvio‐deltaic depositional processes create reservoir compartmentalization in a low‐ to moderate‐accommodation basin. An extensive database involving well logs, cores, production, and pressure data from 200‐plus wells, [Formula: see text] [Formula: see text] of 3-D seismic data, vertical seismic profiles (VSPs), and checkshots was assembled to support this investigation. The reservoir system we studied was the Bend Conglomerate, a productive series of gas reservoirs composed of Middle Pennsylvanian fluvio‐deltaic clastics 900 to 1300 ft (275 to 400 m) thick in our project area. We were particularly interested in this reservoir system because evidence suggested that many of the sequences in this stratigraphic interval were deposited in low‐accommodation conditions (that is, in an environment where there was limited vertical space available for sediment accumulation), and our objective was to investigate how fluvio‐deltaic reservoirs were compartmentalized by low‐accommodation depositional processes. Using an extensive well log database (200 plus wells) and a core‐calibrated calculation of rock facies derived from these logs, we divided the Bend Conglomerate interval into ten genetic sequences, with each sequence being approximately 100 ft (30 m) thick. We then used local VSP and checkshot control to transform log‐measured depths of each sequence boundary to seismic two‐way time coordinates and identified narrow seismic data windows encompassing each sequence across the [Formula: see text] [Formula: see text] 3-D seismic grid. A series of seismic attributes was calculated in these carefully defined data windows to determine which attributes were reliable indicators of the presence of productive reservoir facies and which attributes could, therefore, reveal distinct reservoir compartments and potentially show where infield wells should be drilled to reach previously uncontacted gas reservoirs. Our best success was the seismic attribute correlations we found in the Upper and Lower Caddo sequences, at the top of the Bend Conglomerate. These sequences were deposited in a low‐accommodation setting, relative to other Boonsville sequences, and we found that reflection amplitude and instantaneous frequency, respectively, were reliable indicators of the areal distribution of reservoir facies in these low‐accommodation sequences.


1996 ◽  
Vol 86 (2) ◽  
pp. 524-529
Author(s):  
Hayrullah Karabulut ◽  
John F. Ferguson

Abstract An extension of the boundary integral method for SH waves is given for transversely isotropic media. The accuracy of the method is demonstrated for a simple flat interface problem by comparison to the Cagniard-de Hoop solution. The method is further demonstrated for a case with interface topography for both surface and vertical seismic profiles. The new method is found to be both accurate and effective.


First Break ◽  
1984 ◽  
Vol 2 (11) ◽  
Author(s):  
B. Cassell

Sign in / Sign up

Export Citation Format

Share Document