scholarly journals MT and reflection seismics in northwestern Skellefte Ore District, Sweden

Geophysics ◽  
2013 ◽  
Vol 78 (2) ◽  
pp. B65-B76 ◽  
Author(s):  
María de los Ángeles García Juanatey ◽  
Ari Tryggvason ◽  
Christopher Juhlin ◽  
Ulf Bergström ◽  
Juliane Hübert ◽  
...  
Keyword(s):  
Seismic Reflection ◽  
Impedance Tensor ◽  
Data Sets ◽  
Seismic Reflection Data ◽  
The North ◽  
Reflection Data ◽  
Reflection Seismics ◽  
Resistivity Model ◽  
Seismic Reflectors ◽  
2D Resistivity

A seismic reflection and MT survey was carried out along a 27-km long transect in northwestern Skellefte District, as part of a bigger 3D modeling project. The main motivation for the data acquisition is to elucidate the geologic relationship between the known mineralizations in the Adak mining camp to the north and in the well studied Kristineberg area south of the transect. The seismic reflection data were acquired with a VIBSIST system, and show reflectivity down to 3 s. Apart from the conventional processing for crystalline environments, the seismic data was also subject to an azimuthal binning procedure and cross-dip analysis, allowing the orientation of planar reflectors in 3D. Regarding the MT data, it is primarily of good quality along the 17 installed sites. The inversion of the determinant of the impedance tensor yielded a stable 2D resistivity model, dominated by resistors corresponding to the postorogenic intrusions along the transect. Adding the location of the analyzed seismic reflectors in the MT inversion rendered an integrated model that facilitated a preliminary joint interpretation of the data sets. Overall, the results are in good agreement with surface observations and reveal a crude configuration of the geologic units below the transect. The most prominent outcomes are the lateral and depth extent of the large postorogenic intrusions in the area reaching to 5- or 6-km depth, the dimensions of the nearly vertical Brännäs gabbro extending to 6-km depth, and the presence of enhanced conductivities along the transect at about 10 km depth. The latter is probably related to the deep conductor previously identified in the district.

scholarly journals Improved Interpretation of Deep Seismic Reflection Data in Areas of Complex Geology Through Integration With Passive Seismic Data Sets

2018 ◽  
Vol 123 (12) ◽  
pp. 10,810-10,830
Author(s):  
Michael Dentith ◽  
Huaiyu Yuan ◽  
Ruth Elaine Murdie ◽  
Perla Pina-Varas ◽  
Simon P. Johnson ◽  
...  
Keyword(s):  
Seismic Data ◽  
Seismic Reflection ◽  
Data Sets ◽  
Seismic Reflection Data ◽  
Deep Seismic Reflection ◽  
Reflection Data ◽  
Passive Seismic ◽  
Complex Geology

Shallow seismic reflection study of a glaciated valley

Geophysics ◽  
1998 ◽  
Vol 63 (4) ◽  
pp. 1395-1407 ◽  
Author(s):  
Frank Büker ◽  
Alan G. Green ◽  
Heinrich Horstmeyer
Keyword(s):  
Seismic Reflection ◽  
High Amplitude ◽  
Data Sets ◽  
Seismic Section ◽  
Data Set ◽  
Seismic Reflection Data ◽  
Northern Switzerland ◽  
Reflection Data ◽  
Shallow Seismic ◽  
Glaciated Valley

Shallow seismic reflection data were recorded along two long (>1.6 km) intersecting profiles in the glaciated Suhre Valley of northern Switzerland. Appropriate choice of source and receiver parameters resulted in a high‐fold (36–48) data set with common midpoints every 1.25 m. As for many shallow seismic reflection data sets, upper portions of the shot gathers were contaminated with high‐amplitude, source‐generated noise (e.g., direct, refracted, guided, surface, and airwaves). Spectral balancing was effective in significantly increasing the strength of the reflected signals relative to the source‐generated noise, and application of carefully selected top mutes ensured guided phases were not misprocessed and misinterpreted as reflections. Resultant processed sections were characterized by distributions of distinct seismic reflection patterns or facies that were bounded by quasi‐continuous reflection zones. The uppermost reflection zone at 20 to 50 ms (∼15 to ∼40 m depth) originated from a boundary between glaciolacustrine clays/silts and underlying glacial sands/gravels (till) deposits. Of particular importance was the discovery that the deepest part of the valley floor appeared on the seismic section at traveltimes >180 ms (∼200 m), approximately twice as deep as expected. Constrained by information from boreholes adjacent to the profiles, the various seismic units were interpreted in terms of unconsolidated glacial, glaciofluvial, and glaciolacustrine sediments deposited during two principal phases of glaciation (Riss at >100 000 and Würm at ∼18 000 years before present).

Migration with reduced artifacts from internal multiple reflections

Geophysics ◽  
2020 ◽  
Vol 85 (4) ◽  
pp. A25-A29
Author(s):  
Lele Zhang
Keyword(s):  
Seismic Reflection ◽  
Computational Cost ◽  
Data Sets ◽  
Square Root ◽  
Multiple Reflections ◽  
Data Set ◽  
Seismic Reflection Data ◽  
Reflection Data ◽  
Recent Developments ◽  
Multiple Elimination

Migration of seismic reflection data leads to artifacts due to the presence of internal multiple reflections. Recent developments have shown that these artifacts can be avoided using Marchenko redatuming or Marchenko multiple elimination. These are powerful concepts, but their implementation comes at a considerable computational cost. We have derived a scheme to image the subsurface of the medium with significantly reduced computational cost and artifacts. This scheme is based on the projected Marchenko equations. The measured reflection response is required as input, and a data set with primary reflections and nonphysical primary reflections is created. Original and retrieved data sets are migrated, and the migration images are multiplied with each other, after which the square root is taken to give the artifact-reduced image. We showed the underlying theory and introduced the effectiveness of this scheme with a 2D numerical example.

Labeling long‐period multiple reflections

Geophysics ◽  
1989 ◽  
Vol 54 (1) ◽  
pp. 122-126 ◽  
Author(s):  
R. J. J. Hardy ◽  
M. R. Warner ◽  
R. W. Hobbs
Keyword(s):  
Seismic Reflection ◽  
High Amplitude ◽  
Data Sets ◽  
Multiple Reflections ◽  
Multiple Series ◽  
Seismic Reflection Data ◽  
Long Period ◽  
Reflection Data ◽  
Zero Offset ◽  
Marine Seismic

The many techniques that have been developed to remove multiple reflections from seismic data all leave remnant energy which can cause ambiguity in interpretation. The removal methods are mostly based on periodicity (e.g., Sinton et al., 1978) or the moveout difference between primary and multiple events (e.g., Schneider et al., 1965). They work on synthetic and selected field data sets but are rather unsatisfactory when applied to high‐amplitude, long‐period multiples in marine seismic reflection data acquired in moderately deep (700 m to 3 km) water. Differential moveout is often better than periodicity at discriminating between types of events because, while a multiple series may look periodic to the eye, it is only exactly so on zero‐offset reflections from horizontal layers. The technique of seismic event labeling described below works by returning offset information from CDP gathers to a stacked section by color coding, thereby discriminating between seismic reflection events by differential normal moveout. Events appear as a superposition of colors; the direction of color fringes indicates whether an event has been overcorrected or undercorrected for its hyperbolic normal moveout.

Rift processes in the Westralian Superbasin, North West Shelf, Australia: insights from 2D deep reflection seismic interpretation and potential fields modelling

2015 ◽  
Vol 55 (2) ◽  
pp. 400 ◽  
Author(s):  
Catherine Belgarde ◽  
Gianreto Manatschal ◽  
Nick Kusznir ◽  
Sonia Scarselli ◽  
Michal Ruder
Keyword(s):  
Seismic Reflection ◽  
Potential Fields ◽  
Moho Depth ◽  
Late Permian ◽  
Forward Modelling ◽  
Seismic Reflection Data ◽  
North West ◽  
Reflection Seismic ◽  
The North ◽  
Reflection Data

Acquisition of long-offset (8–10 km), long-record length (12–18 sec), 2D reflection seismic and ship-borne potential fields data (WestraliaSpan by Ion/GXT and New Dawn by PGS) on the North West Shelf of Australia provide the opportunity to study rift processes in the context of modern models for rifted margins (Manatschal, 2004). Basement and Moho surfaces were interpreted on seismic reflection data. Refraction models from Geoscience Australia constrain Moho depth and initial densities for gravity modelling through standard velocity-density transformation. 2D joint inversion of seismic reflection and gravity data for Moho depth and basement density constrain depth to basement on seismic. 2D gravity and magnetic intensity forward modelling of key seismic lines constrain basement thickness, type and density. Late Permian and Jurassic-Early Cretaceous rift zones were mapped on seismic reflection data and constrained further by inversion and forward modelling of potential fields data. The Westralian Superbasin formed as a marginal basin in Eastern Gondwana during the Late Permian rifting of the Sibumasu terrane. Crustal necking was localised along mechanically-weak Proterozoic suture belts or Early Paleozoic sedimentary basins (such as Paterson and Canning). Mechanically-strong cratons (such as Pilbara and Kimberley) remained intact, resulting in necking and hyper-extension at their edges. Late Permian hyper-extended areas (such as Exmouth Plateau) behaved as mechanically-strong blocks during the Jurassic to Early Cretaceous continental break-up. Late Permian necking zones were reactivated as failed-rift basins and localised the deposition of the Jurassic oil-prone source rocks that have generated much of the oil discovered on the North West Shelf.

A NORTH WEST SHELF TRIASSIC REEF PLAY: RESULTS FROM ODP LEG 122

1989 ◽  
Vol 29 (1) ◽  
pp. 328 ◽  
Author(s):  
P.E. Williamson ◽  
N.F. Exon ◽  
B. ul Haq ◽  
U. von Rad
Keyword(s):  
Seismic Reflection ◽  
Upper Triassic ◽  
Seismic Facies ◽  
Late Triassic ◽  
Seismic Reflection Data ◽  
Reef Complex ◽  
North West ◽  
Exmouth Plateau ◽  
The North ◽  
Reflection Data

Site 764 of the Ocean Drilling Program (ODP), drilled during Leg 122 in the Exmouth Plateau region, cored 200 m of Upper Triassic (Rhaetian) reef complex. This site, on the northern Wombat Plateau (northernmost Exmouth Plateau) represents the first discovery of Triassic reefal material near the Australian North West Shelf. Seismic reflection data through Site 764 show that the reef itself corresponds predominantly to a seismically poorly reflective zone. A number of regional unconformities appear to correspond, however, to traceable seismic horizons which pass with reduced amplitude through the reef, indicating stages of reef growth separated by erosion or non- deposition. Seismic facies around the edges of the reef are consistent with the deposition of wedges of prograding reef- derived detritus.Application of the seismic criteria for reef recognition established at ODP Site 764, to other seismic reflection data on the Wombat Plateau, demonstrates that a major Upper Triassic reef complex fringes the margins of the Wombat Plateau. The Wombat Plateau lies at the western end of the North West Shelf, which was part of the southern margin of a warm Tethys Ocean in the Late Triassic, at a palaeolatitude of 25- 30°S. Upper Triassic reefs are known from southeast Indonesia and Papua New Guinea, and now the Wombat Plateau, and may be common elsewhere along the outer margin of the North West Shelf. Upper Triassic reef complexes, with their associated reservoir, source and seal facies, could represent an exciting new petroleum exploration play for the entire North West Shelf. Facies analysis suggests that they are likely only on the outer shelf and slope. Shallow Triassic reef complexes are clearly identifiable using high resolution seismic reflection data. Seismic reflection data of lower resolution may well reveal the associated detrital carbonate wedges, which are more laterally extensive than the reefal core, deeper in the section.

Hectometer-scale, shallow buried honeycomb-like structures on the continental shelf of the Otway Basin, southeastern Australia

2020 ◽  
Vol 8 (4) ◽  
pp. SR65-SR81 ◽  
Author(s):  
Yakufu Niyazi ◽  
Mark Warne ◽  
Daniel Ierodiaconou
Keyword(s):  
Seismic Reflection ◽  
Geospatial Analysis ◽  
Data Sets ◽  
Soft Sediment ◽  
3D Seismic ◽  
Burial Diagenesis ◽  
Seismic Reflection Data ◽  
Reflection Data ◽  
Southeastern Australia ◽  
2D And 3D

The Plio-Pleistocene Whalers Bluff Formation (WBF) of the offshore Otway Basin is composed of mixed siliciclastic-carbonate sediments. In seismic cross sections, this formation includes an interval that consists of higher amplitude seismic reflections that display alternating depressional ponds and raised ridges. This interval is shallowly buried and lies between 40 and 150 ms two-way traveltime below the present-day seafloor. In this study, we have used 2D and 3D seismic data sets in combination with the available shallow subsurface well logs to characterize the geomorphology and investigate the origin of these enigmatic features. The ponds are expressed as densely packed, circular to polygonal, and in some cases, hexagonal-shaped features in time-slice maps, and they closely resemble previously documented honeycomb structures. In our study area, the honeycomb-like structures (HS) are comprised of large (200–800 m diameter range) depressed ponds that are separated by narrow (approximately 20 m at the top) reticulate ridges. In total, these HS cover an area of 760 km2. Geospatial analysis shows that the ponds of HS, especially those in the northeast of the study area, are aligned along the northwest–southeast trend lines. There are several possible origins for the HS. The most probable mechanism is that the HS resulted from the bulk contraction of soft sediment, associated with shallow-burial diagenesis processes such as subaqueous dewatering of the fine-grained successions within the WBF. Interestingly, irregular furrows of various lengths on the seafloor correspond to the ridges of the HS, and we hypothesize that these furrows may have formed due to differential compaction of the underlying alternating ponds and ridges. Our results demonstrate the benefits of using seismic reflection data sets in combination with geospatial analysis to investigate the buried paleogeomorphologic features and their impact on the present-day seafloor physiography. Geological feature: Honeycomb-like, soft sediment deformation associated with shallow-burial diagenesis, Otway Basin, southeastern Australia Cross-section appearance: Alternating depressional ponds and raised ridges Map view appearance: Densely packed, oval to polygonal-shaped features Features with a similar appearance: Acquisition footprints, carbonate mounds/dissolution features, polygonal faults, pockmarks, opal-A to opal-CT transition Formation: Whalers Bluff Formation, offshore Otway Basin Age: Pliocene to recent Location: Continental shelf of the Otway Basin, southeastern Australia Data sets: 2D and 3D seismic reflection data, borehole data, from Geological Survey of Victoria, Australia Analysis tools: Interpretation and visualization (Petrel 2019 and DUG Insight, v.4.7, 2020), Geospatial analysis (ESRI‘s ArcMap 10.5)

Sign in / Sign up

Export Citation Format

Share Document