Anisotropic migration velocity analysis using reverse-time migration

Geophysics ◽  
2014 ◽  
Vol 79 (1) ◽  
pp. R13-R25 ◽  
Author(s):  
Wiktor Waldemar Weibull ◽  
Børge Arntsen
Keyword(s):  
Wave Equation ◽  
Seismic Anisotropy ◽  
Migration Velocity ◽  
Image Point ◽  
Velocity Analysis ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Time Migration ◽  
Migration Velocity Analysis ◽  
Isotropic Media

Seismic anisotropy, if not accounted for, can cause significant mispositioning of the reflectors in depth-migrated images. Accounting for anisotropy in depth migration requires velocity analysis tools that can estimate the anisotropic background velocity field. We extended wave equation migration velocity analysis to deal with 2D tilted transverse isotropic media. The velocities were obtained automatically by nonlinear optimization of the focusing and stack power of common-image point gathers constructed using an extended imaging condition. We used the elastic two-way wave equation to reconstruct the wavefields needed for the image and gradient computations. This led to an anisotropic migration velocity analysis algorithm based on reverse-time migration. We illustrated the method with synthetic and field data examples based on marine surface seismic acquisition. The results showed that the method significantly improves the quality of the depth-migrated image. However, as is common in the case of velocity analysis using surface seismic data, the estimation of anisotropic parameters seems to be strongly nonunique.

Automatic anisotropic migration velocity analysis for reverse-time migration

2012 ◽  
Author(s):  
Wiktor Weibull ◽  
Børge Arntsen ◽  
Marianne Houbiers ◽  
Joachim Mispel
Keyword(s):  
Migration Velocity ◽  
Velocity Analysis ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Time Migration ◽  
Migration Velocity Analysis

Angle-domain common-image gathers from plane-wave least-squares reverse time migration

Geophysics ◽  
2021 ◽  
pp. 1-60
Author(s):  
Chuang Li ◽  
Zhaoqi Gao ◽  
Jinghuai Gao ◽  
Feipeng Li ◽  
Tao Yang
Keyword(s):  
Inverse Problem ◽  
Plane Wave ◽  
Least Squares ◽  
Migration Velocity ◽  
Velocity Analysis ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Time Migration ◽  
Migration Velocity Analysis ◽  
Amplitude Versus

Angle-domain common-image gathers (ADCIGs) that can be used for migration velocity analysis and amplitude versus angle analysis are important for seismic exploration. However, because of limited acquisition geometry and seismic frequency band, the ADCIGs extracted by reverse time migration (RTM) suffer from illumination gaps, migration artifacts, and low resolution. We have developed a reflection angle-domain pseudo-extended plane-wave least-squares RTM method for obtaining high-quality ADCIGs. We build the mapping relations between the ADCIGs and the plane-wave sections using an angle-domain pseudo-extended Born modeling operator and an adjoint operator, based on which we formulate the extraction of ADCIGs as an inverse problem. The inverse problem is iteratively solved by a preconditioned stochastic conjugate gradient method, allowing for reduction in computational cost by migrating only a subset instead of the whole dataset and improving image quality thanks to preconditioners. Numerical tests on synthetic and field data verify that the proposed method can compensate for illumination gaps, suppress migration artifacts, and improve resolution of the ADCIGs and the stacked images. Therefore, compared with RTM, the proposed method provides a more reliable input for migration velocity analysis and amplitude versus angle analysis. Moreover, it also provides much better stacked images for seismic interpretation.

Reverse Time Migration Velocity Analysis with Plane Waves

2015 ◽  
Author(s):  
Luiz Alberto Santos* ◽  
André Bulcão ◽  
Djalma M. Soares Filho ◽  
Bruno Pereira Dias ◽  
Felipe Prado Loureiro ◽  
...  
Keyword(s):  
Plane Waves ◽  
Migration Velocity ◽  
Velocity Analysis ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Time Migration ◽  
Migration Velocity Analysis

Reverse time migration in tilted transversely isotropic media

2020 ◽  
Vol 38 (2) ◽  
Author(s):  
Razec Cezar Sampaio Pinto da Silva Torres ◽  
Leandro Di Bartolo
Keyword(s):  
Seismic Anisotropy ◽  
Synthetic Data ◽  
Transversely Isotropic ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Computer Clusters ◽  
Time Migration ◽  
Transversely Isotropic Media ◽  
Isotropic Media ◽  
Tti Media

ABSTRACT. Reverse time migration (RTM) is one of the most powerful methods used to generate images of the subsurface. The RTM was proposed in the early 1980s, but only recently it has been routinely used in exploratory projects involving complex geology – Brazilian pre-salt, for example. Because the method uses the two-way wave equation, RTM is able to correctly image any kind of geological environment (simple or complex), including those with anisotropy. On the other hand, RTM is computationally expensive and requires the use of computer clusters. This paper proposes to investigate the influence of anisotropy on seismic imaging through the application of RTM for tilted transversely isotropic (TTI) media in pre-stack synthetic data. This work presents in detail how to implement RTM for TTI media, addressing the main issues and specific details, e.g., the computational resources required. A couple of simple models results are presented, including the application to a BP TTI 2007 benchmark model.Keywords: finite differences, wave numerical modeling, seismic anisotropy. Migração reversa no tempo em meios transversalmente isotrópicos inclinadosRESUMO. A migração reversa no tempo (RTM) é um dos mais poderosos métodos utilizados para gerar imagens da subsuperfície. A RTM foi proposta no início da década de 80, mas apenas recentemente tem sido rotineiramente utilizada em projetos exploratórios envolvendo geologia complexa, em especial no pré-sal brasileiro. Por ser um método que utiliza a equação completa da onda, qualquer configuração do meio geológico pode ser corretamente tratada, em especial na presença de anisotropia. Por outro lado, a RTM é dispendiosa computacionalmente e requer o uso de clusters de computadores por parte da indústria. Este artigo apresenta em detalhes uma implementação da RTM para meios transversalmente isotrópicos inclinados (TTI), abordando as principais dificuldades na sua implementação, além dos recursos computacionais exigidos. O algoritmo desenvolvido é aplicado a casos simples e a um benchmark padrão, conhecido como BP TTI 2007.Palavras-chave: diferenças finitas, modelagem numérica de ondas, anisotropia sísmica.

Sign in / Sign up

Export Citation Format

Share Document