Abstract
The method of electrical resistivity has proven very effective in the evaluation of groundwater. This specialized technique uses Dar-Zarrouk (D-Z) parameters in the estimation of longitudinal unit conductance, transverse unit resistance, and longitudinal resistivity to examine the groundwater level, to distinguish the fresh, brackish, and saline water interface, and to assess the storage capacity of groundwater in the Triassic sandstone aquifer system in the Tataouine region (South-Eastern Tunisia). In this context, 23 vertical electrical soundings (VESs) were carried out in the Tataouine region using the Schlumberger configuration with a current electrode with a maximum spacing of the current electrodes (AB) of 500–600 m. The results indicate that the study area consists of three types of aquifers: (i) silt/clay saline water (<20 Ωm), (ii) a mixture of sand and clay freshwater (20–40 Ωm), and (iii) sand freshwater (40–200 Ωm). These sand freshwater aquifers are characterized by low longitudinal unit conductance (0–2.8 S), high values of transverse unit resistance (more than 9,000 Ωm2), and longitudinal resistivity (more than 35 Ωm) and are mainly concentrated in the north, south, and south-west regions of the study area. It should also be noted that the coefficient of anisotropy (λ) overlaps and does not clearly differentiate the characteristics of the aquifers of fresh, brackish, and saline water. An interpretation of VESs can also determine the storage capacity of groundwater by determining yield index values. Groundwater supply for the entire study area was classified as low yield, with a percentage of 13% and a maximum of 31% of the study area and 56% of moderate yield. Lastly, the real data from the drilling confirm all these results presented previously. The findings suggest that D-Z parameters are useful for making a distinction of various aquifer zones.
Twenty years of groundwater evolution in the Triassic sandstone aquifer of Lorraine: Impacts on baseline water quality
