This review covers advances in the analysis of advanced materials, metals, fuels and lubricants, nano structures, ceramics, refractories, organic and inorganic chemicals, catalysts and nuclear materials by a range of techniques including X-ray, ICP, LIBS, mass spectrometry, synchrotron-based techniques, plus non-destructive and ablation surface techniques.
This review covers advances in the analysis of advanced materials, metals, fuels and lubricants, nanostructures, ceramics, refractories, organic and inorganic chemicals, catalysts and nuclear materials by a range of techniques including X-ray, ICP, LIBS, mass spectrometry, synchrotron-based techniques, plus non-destructive and ablation surface techniques.
ABSTRACTStress induced voiding in passivated Cu lines was investigated by x-ray strain analysis and in-situ high voltage scanning electron microscope (HVSEM) techniques. Cu lines on a Ta underlayer and Cu lines on an Al underlayer were patterned by a trilayer liftoff technique and passivated with Si3N4. For direct observation of stress voiding, specimens were heated to 350ºC in the HVSEM and then cooled and held at 150ºC. Identical samples were subjected to the same thermal cycle for strain state determination using x-ray techniques. The hydrostatic stress state at each temperature was calculated from the measured strains. Few initial voids were observed after passivation in either sample. After heating to 350ºC and cooling to the dwell temperature, no new voiding was seen in the Ta/Cu lines. Measured hydrostatic strains were half those measured in the Al/Cu lines. Heavy voiding was observed in the Al/Cu lines after cooling to the dwell temperature.
Atomic spectrometry update: review of advances in the analysis of metals, chemicals and materials
