ABSTRACTWe demonstrate series-connected tandem photovoltaic cells consisting of hydrogenated amorphous silicon (a-Si:H) solar cells and polymer-based organic photovoltaic (OPV) cells. One of the limiting factors of a-Si:H solar cells is their narrow absorption spectrum as compared with that of crystalline silicon solar cells. In order to overcome this limitation, we fabricated a hybrid tandem solar cell by employing a solution-processed OPV subcell based on a low bandgap semiconducting polymer onto the a-Si:H subcell. It was found that the interfacial property of the hole transporting intermediate layer between the subcells strongly affects the photovoltaic property of the tandem cells. By using MoO3 as an efficient hole transporting intermediate layer instead of the conventional conducting polymer, we obtained the power conversion efficiency of 1.84% and the open-circuit voltage (VOC) of 1.50 V which corresponds closely to the sum of the VOCs of the subcells.
Simulation of Crystalline Silicon Photovoltaic Cells for Wearable Applications