Development and Exploration of Safety Performance Functions Using Multiple Modeling Techniques : Trumpet Ramps

2021 ◽  
Vol 20 (5) ◽  
pp. 35-44
Author(s):  
Samgyu Yang ◽  
◽  
Juneyoung Park ◽  
Kyeongjoo Kwon ◽  
Hyunsuk Lee
Keyword(s):  
Safety Performance ◽  
Safety Performance Functions ◽  
Modeling Techniques

Simple Index to Assess the Calibration Quality of Safety Performance Functions Based on Multiple Goodness-of-Fit Metrics

2021 ◽  
pp. 036119812110088
Author(s):  
Raul E. Avelar ◽  
Karen Dixon ◽  
Boniphace Kutela ◽  
Sam Klump ◽  
Beth Wemple ◽  
...  
Keyword(s):  
Goodness Of Fit ◽  
Synthetic Data ◽  
Calibration Procedure ◽  
Safety Performance ◽  
Absolute Deviation ◽  
Data Set ◽  
Safety Database ◽  
Simple Index ◽  
Safety Performance Functions

The calibration of safety performance functions (SPFs) is a mechanism included in the Highway Safety Manual (HSM) to adjust SPFs in the HSM for use in intended jurisdictions. Critically, the quality of the calibration procedure must be assessed before using the calibrated SPFs. Multiple resources to aid practitioners in calibrating SPFs have been developed in the years following the publication of the HSM 1st edition. Similarly, the literature suggests multiple ways to assess the goodness-of-fit (GOF) of a calibrated SPF to a data set from a given jurisdiction. This paper uses the calibration results of multiple intersection SPFs to a large Mississippi safety database to examine the relations between multiple GOF metrics. The goal is to develop a sensible single index that leverages the joint information from multiple GOF metrics to assess overall quality of calibration. A factor analysis applied to the calibration results revealed three underlying factors explaining 76% of the variability in the data. From these results, the authors developed an index and performed a sensitivity analysis. The key metrics were found to be, in descending order: the deviation of the cumulative residual (CURE) plot from the 95% confidence area, the mean absolute deviation, the modified R-squared, and the value of the calibration factor. This paper also presents comparisons between the index and alternative scoring strategies, as well as an effort to verify the results using synthetic data. The developed index is recommended to comprehensively assess the quality of the calibrated intersection SPFs.

Regional Perspective of Safety Performance Functions and Their Application to Florida Intersections in Suburban Residential and Urban General Context Classification Categories

2021 ◽  
pp. 036119812110084
Author(s):  
Ghalia Gamaleldin ◽  
Haitham Al-Deek ◽  
Adrian Sandt ◽  
John McCombs ◽  
Alan El-Urfali
Keyword(s):  
Negative Binomial ◽  
Regression Tree ◽  
Influential Factors ◽  
Safety Performance ◽  
General Context ◽  
Boosted Regression Tree ◽  
Safety Performance Functions ◽  
Traffic Volumes ◽  
Intersection Types ◽  
The Individual

Safety performance functions (SPFs) are essential tools to help agencies predict crashes and understand influential factors. Florida Department of Transportation (FDOT) has implemented a context classification system which classifies intersections into eight context categories rather than the three classifications used in the Highway Safety Manual (HSM). Using this system, regional SPFs could be developed for 32 intersection types (unsignalized and signalized 3-leg and 4-leg for each category) rather than the 10 HSM intersection types. In this paper, eight individual intersection group SPFs were developed for the C3R-Suburban Residential and C4-Urban General categories and compared with full SPFs for these categories. These comparisons illustrate the unique and regional insights that agencies can gain by developing these individual SPFs. Poisson, negative binomial, zero-inflated, and boosted regression tree models were developed for each studied group as appropriate, with the best model selected for each group based on model interpretability and five performance measures. Additionally, a linear regression model was built to predict minor roadway traffic volumes for intersections which were missing these volumes. The full C3R and C4 SPFs contained four and six significant variables, respectively, while the individual intersection group SPFs in these categories contained six and nine variables. Factors such as major median, intersection angle, and FDOT District 7 regional variable were absent from the full SPFs. By developing individual intersection group SPFs with regional factors, agencies can better understand the factors and regional differences which affect crashes in their jurisdictions and identify effective treatments.

scholarly journals The variability of urban safety performance functions for different road elements: an Italian case study

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Paolo Intini ◽  
Nicola Berloco ◽  
Gabriele Cavalluzzi ◽  
Dominique Lord ◽  
Vittorio Ranieri ◽  
...  
Keyword(s):  
Negative Binomial ◽  
Prediction Models ◽  
Safety Performance ◽  
Common Trends ◽  
Main Research ◽  
Pavement Markings ◽  
Italian Case ◽  
Sight Distance ◽  
Safety Performance Functions ◽  
Urban Safety

Abstract Background Urban safety performance functions are used to predict crash frequencies, mostly based on Negative Binomial (NB) count models. They could be differentiated for considering homogeneous subsets of segments/intersections and different predictors. Materials and methods The main research questions concerned: a) finding the best possible subsets for segments and intersections for safety modelling, by discussing the related problems and inquiring into the variability of predictors within the subsets; b) comparing the modelling results with the existing literature to highlight common trends and/or main differences; c) assessing the importance of additional crash predictors, besides traditional variables. In the context of a National research project, traffic volumes, geometric, control and additional variables were collected for road segments and intersections in the City of Bari, Italy, with 1500 fatal+injury related crashes (2012–2016). Six NB models were developed for: one/two-way homogeneous segments, three/four-legged, signalized/unsignalized intersections. Results Crash predictors greatly vary within the different subsets considered. The effect of vertical signs on minor roads/driveways, critical sight distance, cycle crossings, pavement/markings maintenance was specifically discussed. Some common trends but also differences in both types and effect of crash predictors were found by comparing results with literature. Conclusion The disaggregation of urban crash prediction models by considering different subsets of segments and intersections helps in revealing the specific influence of some predictors. Local characteristics may influence the relationships between well-established crash predictors and crash frequencies. A significant part of the urban crash frequency variability remains unexplained, thus encouraging research on this topic.

Differences in the Performance of Safety Performance Functions Estimated for Total Crash Count and for Crash Count by Crash Type

2009 ◽  
Vol 2102 (1) ◽  
pp. 115-123 ◽  
Author(s):  
Thomas Jonsson ◽  
Craig Lyon ◽  
John N. Ivan ◽  
Simon P. Washington ◽  
Ida van Schalkwyk ◽  
...  
Keyword(s):  
Safety Performance ◽  
Safety Performance Functions

Safety Performance Functions for Rural Two-Lane County Road Segments

2018 ◽  
Vol 2672 (52) ◽  
pp. 226-237 ◽  
Author(s):  
Steven Y. Stapleton ◽  
Anthony J. Ingle ◽  
Meghna Chakraborty ◽  
Timothy J. Gates ◽  
Peter T. Savolainen
Keyword(s):  
Negative Binomial ◽  
Unobserved Heterogeneity ◽  
Strong Association ◽  
Random Effect ◽  
Safety Performance ◽  
Federal Aid ◽  
Rural County ◽  
Design Standards ◽  
Safety Performance Functions ◽  
Lane County

Safety performance functions (SPFs) were developed for rural two-lane county roadway segments in Michigan. Five years of crash data (2011 to 2015) were analyzed for greater than 6,500 mi of rural county roadways, covering 29 of Michigan’s 83 counties and representing all regions of the state. Three separate models were developed to estimate annual deer-excluded total and injury crashes on rural county roadways: 1) paved federal-aid segments, 2) paved non-federal-aid segments, and 3) paved and gravel non-federal-aid segments with fewer than 400 vpd. To account for the unobserved heterogeneity associated with differing county design standards, mixed effects negative binomial models with a county-specific random effect were utilized. Not surprisingly, the county segment SPFs generally differed from traditional models generated using data from state-maintained roadways. County federal-aid roadways general showed greater crash occurrence than county non-federal-aid roadways, the Highway Safety Manual (HSM) two-lane rural roadways model, and rural state highways in Michigan. County non-federal-aid paved roadways showed crash occurrence rates that were remarkably similar to the HSM base rural two-lane roadway model, whereas gravel roadways showed greater crash occurrence rates. The presence of horizontal curves with design speeds below 55 mph had a strong association with the occurrence of total and injury crashes across all county road classes. Increasing driveway density was also found to be associated with increased crash occurrence. However, lane width, roadway surface width, and paved shoulder width had little to no impact on total or injury crashes.

Evaluation of Safety Performance Functions Based on Experimental Design Using a Cross-Validation Method

2017 ◽  
Vol 2636 (1) ◽  
pp. 62-72 ◽  
Author(s):  
Jung-Han Wang ◽  
Mohamed A. Abdel-Aty ◽  
Jaeyoung Lee
Keyword(s):  
Goodness Of Fit ◽  
Cross Validation ◽  
Safety Performance ◽  
Major Road ◽  
Highway Safety Manual ◽  
Annual Average Daily Traffic ◽  
Minor Road ◽  
Safety Performance Functions ◽  
The One ◽  
Leave One Out

The Highway Safety Manual (HSM) Part C provides a series of safety performance functions (SPFs) for different roadway conditions. The SPFs suggested in the HSM are formulated on the basis of exposure variables: the logarithms of the annual average daily traffic (AADT) on the major road and on the minor road under the base condition. In this research, data from 7,802 intersections in Florida were collected and processed. These intersections were categorized into seven types based on area type (rural or urban), number of legs (three or four), and number of approaches controlled by stop signs. Twenty-two SPF formulations, including the one suggested by the HSM, were developed for each intersection type for examination of the goodness-of-fit measures of the SPFs. In addition, the goodness of fit of each model of the 22 SPFs in each category was examined with 10-fold leave-one-out cross-validation (LOOCV). With a comparison of the delta values generated with the LOOCV method, it is suggested that the SPF with the logarithm of the total entering vehicle volume and the ratio of the AADT on the minor road and the AADT on the major road are important. In addition, the SPFs with the AADT on the major road and the AADT on the minor road and their logarithmic transformations are also important. Therefore, it is suggested that the future HSM compare these two SPF formulations—as suggested in the current research, along with the original SPF formulation in the manual—and select the one with the best model fit on the basis of the delta value using LOOCV.

scholarly journals Crash Prediction Models for Horizontal Curve Segments on Two-Lane Rural Roads in Thailand

2021 ◽  
Vol 13 (16) ◽  
pp. 9011
Author(s):  
Nopadon Kronprasert ◽  
Katesirint Boontan ◽  
Patipat Kanha
Keyword(s):  
Prediction Models ◽  
Safety Performance ◽  
Horizontal Curve ◽  
Crash Frequency ◽  
Rural Roads ◽  
Crash Prediction ◽  
Road Crashes ◽  
Highway Safety Manual ◽  
Safety Performance Functions ◽  
Crash Prediction Models

The number of road crashes continues to rise significantly in Thailand. Curve segments on two-lane rural roads are among the most hazardous locations which lead to road crashes and tremendous economic losses; therefore, a detailed examination of its risk is required. This study aims to develop crash prediction models using Safety Performance Functions (SPFs) as a tool to identify the relationship among road alignment, road geometric and traffic conditions, and crash frequency for two-lane rural horizontal curve segments. Relevant data associated with 86,599 curve segments on two-lane rural road networks in Thailand were collected including road alignment data from a GPS vehicle tracking technology, road attribute data from rural road asset databases, and historical crash data from crash reports. Safety Performance Functions (SPFs) for horizontal curve segments were developed, using Poisson regression, negative binomial regression, and calibrated Highway Safety Manual models. The results showed that the most significant parameter affecting crash frequency is lane width, followed by curve length, traffic volume, curve radius, and types of curves (i.e., circular curves, compound curves, reverse curves, and broken-back curves). Comparing among crash prediction models developed, the calibrated Highway Safety Manual SPF outperforms the others in prediction accuracy.

Calibration and Transferability of Accident Prediction Models for Urban Intersections

2002 ◽  
Vol 1784 (1) ◽  
pp. 57-64 ◽  
Author(s):  
Bhagwant Persaud ◽  
Dominique Lord ◽  
Joseph Palmisano
Keyword(s):  
Functional Form ◽  
Prediction Models ◽  
Research Effort ◽  
Safety Performance ◽  
Accident Prediction ◽  
Unsignalized Intersections ◽  
Safety Performance Functions ◽  
Safety Design ◽  
Accident Data ◽  
Single Calibration

Accident prediction models, also known as safety performance functions, have several important uses in modern-day safety analysis. Unfortunately, calibration of these models is not straightforward. A research effort was undertaken that demonstrates the complexity of calibrating these models for urban intersections. These complexities relate to the specification of the functional form, the accommodation of the peculiarities of accident data, and the transferability of models to other jurisdictions. Toronto data were used to estimate models for three- and four-legged signalized and unsignalized intersections. Then the performance of these models was compared with that of models for Vancouver and California that were recalibrated for Toronto using a procedure recently proposed for the application in the Interactive Highway Safety Design Model (IHSDM). The results of this transferability test are mixed, suggesting that a single calibration factor as is currently specified in the IHSDM procedure may be inappropriate and that a disaggregation by traffic volume might be preferable.

Safety Performance of Rural Curved Corner Intersections with Regional Effects

2021 ◽  
pp. 036119812110444
Author(s):  
Anthony Ingle ◽  
Timothy J. Gates
Keyword(s):  
Negative Binomial ◽  
Signalized Intersections ◽  
Regression Modeling ◽  
Safety Performance ◽  
Radius Of Curvature ◽  
Rural Roads ◽  
Produce Safety ◽  
Regional Effects ◽  
Random Intercept ◽  
Safety Performance Functions

This study evaluates the intersection of rural roads where a curved roadway segment connects the major flow of through traffic from orthogonal directions. A system of up to three intersections in combination can be represented singly by the situation modeled in this paper as a curved corner intersection site. This paper evaluates the application of random intercept negative binomial (NB) regression modeling to produce safety performance functions, and compares the outcome with NB models using fixed regional effects. At curved corner intersections, installing a combined/merged intersection approach near the midpoint of the curve is a potential countermeasure that by comparison with three-leg configurations experienced 20% fewer intersection crashes. A larger radius of curvature along the curved segment at these types of intersections is also very favorable for safety performance. Each 100 ft increase in the radius of a three-leg or four-leg curved corner intersection is estimated to reduce total non-animal crash occurrence by 5% and 7%, respectively. This study can help safety engineers to prioritize the improvement of rural un-signalized intersections.

Sign in / Sign up

Export Citation Format

Share Document