M1003 Local Heat Transfer Characteristics of a Flat Plate Boundary Layer Disturbed by a Circular Cylinder

2016 ◽  
Vol 2016.91 (0) ◽  
pp. 361
Author(s):  
Naoki WADA ◽  
Takayuki SHIRAZAWA ◽  
Mamoru SENDA ◽  
Kyoji INAOKA
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Circular Cylinder ◽  
Flat Plate ◽  
Plate Boundary ◽  
Local Heat Transfer ◽  
Local Heat ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics ◽  
Flat Plate Boundary Layer

Heat Transfer Characteristics of an Inclined Impinging Jet on a Curved Surface in Crossflow

2014 ◽  
Vol 136 (8) ◽  
Author(s):  
X. L. Wang ◽  
H. B. Yan ◽  
T. J. Lu ◽  
S. J. Song ◽  
T. Kim
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Flat Plate ◽  
Local Heat Transfer ◽  
Impinging Jet ◽  
Local Heat ◽  
Curved Surface ◽  
Heat Transfer Characteristics ◽  
Potential Core ◽  
Transfer Characteristics

This study reports on heat transfer characteristics on a curved surface subject to an inclined circular impinging jet whose impinging angle varies from a normal position θ = 0 deg to θ = 45 deg at a fixed jet Reynolds number of Rej = 20,000. Three curved surfaces having a diameter ratio (D/Dj) of 5.0, 10.0, and infinity (i.e., a flat plate) were selected, each positioned systematically inside and outside the potential core of jet flow where Dj is the circular jet diameter. Present results clarify similar and dissimilar local heat transfer characteristics on a target surface due to the convexity. The role of the potential core is identified to cause the transitional response of the stagnation heat transfer to the inclination of the circular jet. The inclination and convexity are demonstrated to thicken the boundary layer, reducing the local heat transfer (second peaks) as opposed to the enhanced local heat transfer on a flat plate resulting from the increased local Reynolds number.

scholarly journals A Theory for Wake-Induced Transition

1989 ◽  
Author(s):  
R. E. Mayle ◽  
K. Dullenkopf
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Turbulent Flow ◽  
Flat Plate ◽  
Free Stream ◽  
Plate Boundary ◽  
Transition Model ◽  
Model Comparisons ◽  
Turbulent Wakes ◽  
Flat Plate Boundary Layer

A theory for transition from laminar to turbulent flow as the result of unsteady, periodic passing of turbulent wakes in the free stream is developed using Emmons’ transition model. Comparisons made to flat plate boundary layer measurements and airfoil heat transfer measurements confirm the theory.

Local Heat Transfer Characteristics in Simulated Electronic Modules

2003 ◽  
Vol 125 (3) ◽  
pp. 362-368 ◽  
Author(s):  
Seong-Yeon Yoo ◽  
Jong-Hark Park ◽  
Min-Ho Chung
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
Three Dimensional ◽  
Vortex Generator ◽  
Local Heat Transfer ◽  
Local Heat ◽  
Two Dimensional ◽  
Heat Transfer Characteristics ◽  
Dimensional Array ◽  
Transfer Characteristics

When heat is released by forced convection from electronic modules in a narrow printed circuit board channel, complex flow phenomena—such as stagnation and acceleration on the front surface, separation and reattachment on the top surface, wake or cavity flow near the rear surface—affect the heat transfer characteristics. The purpose of this study is to investigate how these flow conditions influence the local heat transfer from electronic modules. Experiments are performed on a three-dimensional array of hexahedral elements as well as on a two-dimensional array of rectangular elements. Naphthalene sublimation technique is employed to measure three-dimensional local mass transfer, and the mass transfer data are converted to their counterparts of the heat transfer process using the analogy equation between heat and mass transfer. Module location and streamwise module spacing are varied, and the effect of vortex generators on heat transfer enhancement is also examined. Dramatic change of local heat transfer coefficients is found on each surface of the module, and three-dimensional modules have a little higher heat transfer value than two-dimensional modules because of bypass flow. Longitudinal vortices formed by vortex generator enhance the mixing of fluids and thereby heat transfer, and the rectangular wing type vortex generator is found to be more effective than the delta wing type vortex generator.

Sign in / Sign up

Export Citation Format

Share Document