Analysis of pH Dependence of Threshold Energy Release Rate for Stress Corrosion Cracking in SiO2 Based on Atomistic Model

2016 ◽  
Vol 2016 (0) ◽  
pp. J2210301
Author(s):  
Akio YASUKAWA
Keyword(s):  
Energy Release Rate ◽  
Stress Corrosion ◽  
Energy Release ◽  
Stress Corrosion Cracking ◽  
Release Rate ◽  
Ph Dependence ◽  
Threshold Energy ◽  
Corrosion Cracking ◽  
Atomistic Model

The Effect of Some Electrolytes on the Stress Corrosion Cracking of AISI 4340 Steel

CORROSION ◽  
1972 ◽  
Vol 28 (9) ◽  
pp. 340-344 ◽  
Author(s):  
H. R. BAKER ◽  
C. R. SINGLETERRY
Keyword(s):  
Stress Corrosion ◽  
Stress Corrosion Cracking ◽  
Ph Dependence ◽  
Corrosion Cracking ◽  
Alkaline Solutions ◽  
Poor Correlation ◽  
Time To Failure ◽  
Aisi 4340 Steel ◽  
4340 Steel ◽  
Aisi 4340

Abstract The effects of solutions of 16 different electrolytes on the stress corrosion cracking (SCC) of AISI 4340 steel U-bend specimens have been studied at various concentrations and at 25, 65, and 100 C (77, 149, and 212 F). Stresses were near the yield point of the alloy. In unbuffered solutions of neutral salts, there was poor correlation between time to failure and the initial or final pH of the solution. In strongly buffered solutions, there was a strong pH dependence; the time to failure in 10% NaCl increased about 100 fold between pH 4–5 and pH 7. Susceptibility to cracking increased moderately with the concentration of KNO3 solutions, but decreased with rising concentration of NaCl solutions. The cracking rate increased by 50% per 10 C for NaCl solutions. The rate increased 85% per 10 C for KNO3 solutions. KNO2 or NaNO2, dicyclohexylammonium nitrate, some K2CrO4 solutions and all alkaline solutions with a strong reserve of base inhibited SCC by factors of 10 to 100 times as compared with cracking in distilled H2O.

Calculating Energy Release Rate as a Function of Crack Length Using a Multiple-Step Crack Closure Technique in Tire Finite Element Models

2018 ◽  
Vol 46 (3) ◽  
pp. 130-152
Author(s):  
Dennis S. Kelliher
Keyword(s):  
Finite Element ◽  
Energy Release Rate ◽  
Crack Length ◽  
Energy Release ◽  
Crack Closure ◽  
Release Rate ◽  
Fatigue Behavior ◽  
Three Dimensions ◽  
Quantitative Prediction ◽  
Closure Technique

ABSTRACT When performing predictive durability analyses on tires using finite element methods, it is generally recognized that energy release rate (ERR) is the best measure by which to characterize the fatigue behavior of rubber. By addressing actual cracks in a simulation geometry, ERR provides a more appropriate durability criterion than the strain energy density (SED) of geometries without cracks. If determined as a function of crack length and loading history, and augmented with material crack growth properties, ERR allows for a quantitative prediction of fatigue life. Complications arise, however, from extra steps required to implement the calculation of ERR within the analysis process. This article presents an overview and some details of a method to perform such analyses. The method involves a preprocessing step that automates the creation of a ribbon crack within an axisymmetric-geometry finite element model at a predetermined location. After inflating and expanding to three dimensions to fully load the tire against a surface, full ribbon sections of the crack are then incrementally closed through multiple solution steps, finally achieving complete closure. A postprocessing step is developed to determine ERR as a function of crack length from this enforced crack closure technique. This includes an innovative approach to calculating ERR as the crack length approaches zero.

AMBRONZE 413

Alloy Digest ◽  
1969 ◽  
Vol 18 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
Stress Corrosion Cracking ◽  
Electrical Contact ◽  
Heat Treating ◽  
Corrosion Cracking ◽  
Tin Bronze

Abstract AMBRONZE 413 is a copper-tin bronze recommended for plater's plates and electrical contact springs. It is relatively immune to stress-corrosion cracking. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-201. Producer or source: Anaconda American Brass Company.

NICROFER 5716 HMoW

Alloy Digest ◽  
1985 ◽  
Vol 34 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
Stress Corrosion Cracking ◽  
Crevice Corrosion ◽  
Corrosion Cracking ◽  
Low Carbon ◽  
Nickel Chromium ◽  
Corrosion Pitting

Abstract NICROFER 5716 HMoW is a nickel-chromium-molybdenum alloy with tungsten and extremely low carbon and silicon contents. It has excellent resistance to crevice corrosion, pitting and stress-corrosion cracking. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, machining, and joining. Filing Code: Ni-324. Producer or source: Vereingte Deutsche Metallwerke AG.

NAS 825

Alloy Digest ◽  
2012 ◽  
Vol 61 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Stress Corrosion Cracking ◽  
Chloride Ion ◽  
Heat Treating ◽  
Corrosion Cracking ◽  
Corrosion Resistant

Abstract NAS 825 is a corrosion-resistant nickel alloy that has resistance to both oxidizing and reducing environments, and with 42% nickel, the alloy is very resistant to chloride-ion stress-corrosion cracking. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-694. Producer or source: Nippon Yakin Kogyo Company Ltd.

Sign in / Sign up

Export Citation Format

Share Document