2A1-N-124 Research on force feedback for link-type two directional bending forceps of a minimally invasive surgical robotic system(Medical and Welfare Robotics and Mechatronics 3,Mega-Integration in Robotics and Mechatronics to Assist Our Daily Lives)

Author(s):  
Hiroki Takahashi ◽  
Sin'ichi Warisawa ◽  
Mamoru Mitsuishi
Volume 3 ◽  
2004 ◽  
Author(s):  
Aldo Rossi ◽  
Alberto Trevisani ◽  
Alessandro Gasparetto ◽  
Vanni Zanotto

The aim of this paper is to present a new robotic system for minimally invasive radio surgery. The system is called DAANS and is used to move a new miniaturized x-ray source called PRS with great precision and repeatability. By means of the DAANS the PRS dose delivery center can be moved linearly along the emission axis and rotated about the same axis. Moreover the DAANS is provided with a load cell which measures the force, along the emission axis, exerted by the PRS on a patient’s tissues, and which allows generating an appropriate force feedback on a specifically developed haptic console. The system is now being manufactured and will soon be employed in clinical tests.


2010 ◽  
Vol 4 (3) ◽  
Author(s):  
Shorya Awtar ◽  
Tristan T. Trutna ◽  
Jens M. Nielsen ◽  
Rosa Abani ◽  
James Geiger

This paper presents a new minimally invasive surgical (MIS) tool design paradigm that enables enhanced dexterity, intuitive control, and natural force feedback in a low-cost compact package. The paradigm is based on creating a tool frame that is attached to the surgeon’s forearm, making the tool shaft an extension of the latter. Two additional wristlike rotational degrees of freedom (DoF) provided at an end-effector that is located at the end of the tool shaft are manually actuated via a novel parallel-kinematic virtual center mechanism at the tool input. The virtual center mechanism, made possible by the forearm-attached tool frame, creates a virtual two-DoF input joint that is coincident with the surgeon’s wrist, allowing the surgeon to rotate his/her hand with respect to his/her forearm freely and naturally. A cable transmission associated with the virtual center mechanism captures the surgeon’s wrist rotations and transmits them to the two corresponding end-effector rotations. This physical configuration allows an intuitive and ergonomic one-to-one mapping of the surgeon’s forearm and hand motions at the tool input to the end-effector motions at the tool output inside the patient’s body. Moreover, a purely mechanical construction ensures low-cost, simple design, and natural force feedback. A functional decomposition of the proposed physical configuration is carried out to identify and design key modules in the system—virtual center mechanism, tool handle and grasping actuation, end-effector and output joint, transmission system, tool frame and shaft, and forearm brace. Development and integration of these modules leads to a proof-of-concept prototype of the new MIS tool, referred to as FlexDex™, which is then tested by a focused end-user group to evaluate its performance and obtain feedback for the next stage of technology development.


Sign in / Sign up

Export Citation Format

Share Document