Laser-induced (1064-μm) damage threshold measurement at the GEC Research Laboratories, Hirst Research Centre

1984 ◽  
Vol 23 (21) ◽  
pp. 3779 ◽  
Author(s):  
R. M. Wood ◽  
R. J. Chad
2015 ◽  
Vol 42 (8) ◽  
pp. 0802001
Author(s):  
苑利钢 Yuan Ligang ◽  
陈国 Chen Guo ◽  
侯天禹 Hou Tianyu ◽  
韩隆 Han Long ◽  
赵鸿 Zhao Hong ◽  
...  

2000 ◽  
Author(s):  
Jianping Hu ◽  
Li Yang ◽  
Fuming Qiu ◽  
Xun Zeng ◽  
Fuxing Yang

2015 ◽  
Vol 27 (5) ◽  
pp. 52006
Author(s):  
刘志超 Liu Zhichao ◽  
郑轶 Zheng Yi ◽  
吴倩 Wu Qian ◽  
潘峰 Pan Feng ◽  
罗晋 Luo Jin ◽  
...  

1995 ◽  
Author(s):  
Ali A. Said ◽  
Tie J. Xia ◽  
Aristide C. Dogariu ◽  
David J. Hagan ◽  
M. J. Soileau ◽  
...  

2016 ◽  
Vol 382 ◽  
pp. 294-301 ◽  
Author(s):  
Zhichao Liu ◽  
Yi Zheng ◽  
Feng Pan ◽  
Qi Lin ◽  
Ping Ma ◽  
...  

2012 ◽  
Vol 24 (5) ◽  
pp. 1093-1097
Author(s):  
郝欣 Hao Xin ◽  
王逍 Wang Xiao ◽  
黄晚晴 Huang Wanqing ◽  
周凯南 Zhou Kainan ◽  
赵磊 Zhao Lei ◽  
...  

Author(s):  
William Krakow

It has long been known that defects such as stacking faults and voids can be quenched from various alloyed metals heated to near their melting point. Today it is common practice to irradiate samples with various ionic species of rare gases which also form voids containing solidified phases of the same atomic species, e.g. ref. 3. Equivalently, electron irradiation has been used to produce damage events, e.g. ref. 4. Generally all of the above mentioned studies have relied on diffraction contrast to observe the defects produced down to a dimension of perhaps 10 to 20Å. Also all these studies have used ions or electrons which exceeded the damage threshold for knockon events. In the case of higher resolution studies the present author has identified vacancy and interstitial type chain defects in ion irradiated Si and was able to identify both di-interstitial and di-vacancy chains running through the foil.


Author(s):  
H. K. Birnbaum ◽  
I. M. Robertson

Studies of the effects of hydrogen environments on the deformation and fracture of fcc, bcc and hep metals and alloys have been carried out in a TEM environmental cell. The initial experiments were performed in the environmental cell of the HVEM facility at Argonne National Laboratory. More recently, a dedicated environmental cell facility has been constructed at the University of Illinois using a JEOL 4000EX and has been used for these studies. In the present paper we will describe the general design features of the JEOL environmental cell and some of the observations we have made on hydrogen effects on deformation and fracture.The JEOL environmental cell is designed to operate at 400 keV and below; in part because of the available accelerating voltage of the microscope and in part because the damage threshold of most materials is below 400 keV. The gas pressure at which chromatic aberration due to electron scattering from the gas molecules becomes excessive does not increase rapidly with with accelerating voltage making 400 keV a good choice from that point of view as well. A series of apertures were placed above and below the cell to control the pressures in various parts of the column.


Sign in / Sign up

Export Citation Format

Share Document