scholarly journals A new flowchart for parameters calculation of Hybrid Active Power Filter with Injection Circuit

PLoS ONE ◽  
2021 ◽  
Vol 16 (7) ◽  
pp. e0253275
Author(s):  
Tung Khac Truong ◽  
Chau Minh Thuyen

This paper presents a new flowchart for parameters calculation of Hybrid Active Power Filter with Injection Circuit (IHAPF). The first is the necessity to use the IHAPF model and the parameters of the IHAPF needed to search have been shown. Next, the constraints of the parameters to be searched and the objective function to be reached are given. Since then a flowchart is designed to look for parameters of IHAPF using the Jaya optimization algorithm. The Jaya algorithm has the advantage of simplicity, few parameters, and good performance. Therefore it reduces search time. Compared to the flowchart using the firefly algorithm, particle swarm optimization algorithm, and simulated annealing algorithm, the simulation results performed on an IHAPF 10kV-50Hz model have proven that: the proposed flowchart gives better results in minimizing the compensation errors, minimum phase shift angle between supply current, and source voltage, minimum total harmonic distortion of supply current.

Author(s):  
Chau Minh Thuyen ◽  
Truong Khac Tung ◽  
Nguyen Hoai Phong

<p>This paper proposes a new multi-objective optimization design method for Hybrid Active Power Filter based on the Vortex Search algorithm. The Vortex Search algorithm belongs to the Single-Solution Based algorithm class of Metaheuristics algorithm. This design method has the advantage of fast execution time, high convergence speed and prevent local trap problems. The achieved results are multi-objective, such as minimum total harmonic distortion of the supply current and source voltage and satisfy many constraints such as system stability, resonance conditions of branches and limits of the parameters. Compared with the traditional design method, simulation results have proved that: the proposed design method is given with better results in minimizing total harmonic distortion of the supply current and source voltage.</p>


Author(s):  
Chau Minh Thuyen

The correct determination of the parameters of Hybrid Active Power Filter (HAPF) plays a decisive role in its performance. Therefore, this paper proposes a new design algorithm for HAPF based on the Social Spider Algorithm (SSA). This algorithm has the advantage that it is possible to determine the parameters of both the power circuit part and the control circuit part of HAPF. The achieved results are multi-purpose, such as: minimum total harmonic distortion of the supply current and source voltage, the maximum reactive power compensation into the system and satisfy many constraints such as: system stability, resonance conditions of the branches and the limits of the parameters. Compared to traditional design method using the Particle Swarm Optimization algorithm, the proposed algorithm shows the advantages of smaller total harmonic distortion of supply current and source voltage, and higher reactive power compensation into the grid while still meeting the constraints.


Author(s):  
Chau Minh Thuyen

<p>This paper aims to design a control method using an adaptive controller for Hybrid Active Power Filter. The controller of designed method includes a traditional discrete Proportional Integral controller and a neural regulator. The neural regulator is used to estimate the nonlinear model of Hybrid Active Power Filter and predict an output value in the future to adjust the parameters of the traditional discrete Proportional Integral controller according to the change of load. Compared to the control method using a conventional Proportional Integral controller, the proposed controller shows the advantages of smaller compensation error and smaller total harmonic distortion and able to online control very well. The simulations have verified the effectiveness of proposed controller.</p><p> </p>


Author(s):  
Dygku Aniqnatasa Awg Osman ◽  
Rahimi Baharom ◽  
Dalina Johari ◽  
Muhamad Nabil Hidayat ◽  
Khairul Safuan Muhammad

<span>The development of active power filter (APF) using rectifier boost technique has been identified to compensate for the pulsating nature of the distorted supply current waveform of non-linear load. In this work, investigation is carried out on the operation of rectifier without any filters function. This is then extended to operate the rectifier converter with an active power filter function. APF function is implemented by enabling the closed-loop control using standard proportional integral control to rectify the distorted supply current to become continuous, sinusoidal and in-phase with the supply voltage waveform. Consequently, the total harmonic distortion (THD) level was reduced to meet the acceptable limit defined in the standard of IEEE-519 1992. The selected simulation results obtained from MATLAB/Simulink are presented to justify the proposed filter structure.</span>


2018 ◽  
Vol 2018 ◽  
pp. 1-8 ◽  
Author(s):  
Soumya Ranjan Das ◽  
Prakash K. Ray ◽  
Asit Mohanty

This paper contributes an innovative gating signal generation technique based on fuzzy sliding mode pulse width modulation (FSMPWM) with a Series Hybrid Active Power Filter (SEHAPF) for reducing the total harmonic distortion (THD). Hybrid filters are used for compensating reactive power on the load side and mitigate harmonics for the growth of power quality under variable source and load conditions in the utility system. The objective of the paper is to eradicate the various power quality (PQ) problems with development in power factor and reducing distortion in transmission and distribution line due to harmonics. With the implementation of FSMPWM of the proposed filter, the gating pulses are generated by implementing a Mamdani fuzzy rule with sliding surfaces. For producing a fixed pulse the presented method reduces the chattering reaction by controlling the narrow boundary coating on the sliding surface. The results of the projected technique are analyzed and compared with the traditional hysteresis band current controller (HCC). The overall proficiency and results are examined with the help of MATLAB/SIMULINK environment.


Sign in / Sign up

Export Citation Format

Share Document