scholarly journals Fuzzy Cumulative Sum Control Chart for Monitoring Fuzzy Process

2021 ◽  
Vol 20 (2) ◽  
pp. 34-42
Author(s):  
Thitanon Charurotkeerati
2020 ◽  
Vol 150 ◽  
pp. 106891
Author(s):  
Rashid Mehmood ◽  
Muhammad Hisyam Lee ◽  
Iftikhar Ali ◽  
Muhammad Riaz ◽  
Shahid Hussain

2021 ◽  
Vol 49 (3) ◽  
pp. 684-695
Author(s):  
Jawad Mohammed ◽  
Jaber Abdulhady

Monitoring the condition of rotating machines is essential for the systems' safety, reducing maintenance costs, and increasing reliability. In this research, a fault detection system for bearings was developed using the vibration analysis technique with the statistical control chart approach. A test rig was first designed and constructed; then, various bearing faults, such as inner race and outer race faults, were simulated and examined in the test rig. After capturing the vibration signals at different bearing health conditions, the time-domain signal analysis technique was employed for extracting different indicative features. The obtained time domain features were then analyzed to find out the most fault-significant feature. Then, only one feature was selected to design the control chart for bearing health condition monitoring. The cumulative sum control chart (CUSUM was utilized since it can detect the small changes in bearing health states. The results showed the effectiveness of utilizing this method, and it was found that the percentage of the out-of-control points in the event of the combined cage and ball fault to the number of tested samples is greater than the other fault types.


2021 ◽  
Vol 21 (S2) ◽  
Author(s):  
Yueying Tan ◽  
Xin Lai ◽  
Jiayin Wang ◽  
Xuanping Zhang ◽  
Xiaoyan Zhu ◽  
...  

Abstract Background The influenza surveillance has been received much attention in public health area. For the cases with excessive zeroes, the zero-inflated Poisson process is widely used. However, the traditional control charts based on zero-inflated Poisson model, ignore the association between influenza cases and risk factors, and thus may lead to unexpected mistakes when implementing monitoring charts. Method In this paper, we proposed risk-adjusted zero-inflated Poisson cumulative sum control charts, in which the risk factors were put to adjust the risk of influenza and the adjustment was made by zero-inflated Poisson regression. We respectively proposed the control chart monitoring the parameters individually and simultaneously. Results The performance of our proposed risk-adjusted zero-inflated Poisson cumulative sum control chart was evaluated and compared with the unadjusted standard cumulative sum control charts in simulation studies. The results show that for different distribution of impact factors and different coefficients, the risk-adjusted cumulative sum charts can generate much less false alarm than the standard ones. Finally, the influenza surveillance data from Hong Kong is used to illustrate the application of the proposed chart. Conclusions Our results suggest that the adjusted cumulative sum control chart we proposed is more accurate and credible than the unadjusted standard control charts because of the lower false alarm rate of the adjusted ones. Even the unadjusted control charts may signal a little faster than the adjusted ones, the alarm they raise may have low credibility since they also raise alarm frequently even the processes are in control. Thus we suggest using the risk-adjusted cumulative sum control charts to monitor the influenza surveillance data to alert accurately, credibly and relatively quickly.


2018 ◽  
Vol 10 (11) ◽  
pp. 168781401881062 ◽  
Author(s):  
Beixin Xia ◽  
Zheng Jian ◽  
Lei Liu ◽  
Long Li

Conventional multivariate cumulative sum control charts are more sensitive to small shifts than [Formula: see text] control charts, but they cannot get the knowledge of manufacturing process through the learning of in-control data due to the characteristics of their own structures. To address this issue, a modified multivariate cumulative sum control chart based on support vector data description for multivariate statistical process control is proposed in this article, which is named [Formula: see text] control chart. The proposed control chart will have both advantages of the multivariate cumulative sum control charts and the support vector data description algorithm, namely, high sensitivities to small shifts and learning abilities. The recommended values of some key parameters are also given for a better application. Based on these, a bivariate simulation experiment is conducted to evaluate the performance of the [Formula: see text] control chart. A real industrial case illustrates the application of the proposed control chart. The results also show that the [Formula: see text] control chart is more sensitive to small shifts than other traditional control charts (e.g. [Formula: see text] and multivariate cumulative sum) and a D control chart based on support vector data description.


Sign in / Sign up

Export Citation Format

Share Document