Ambient Noise Tomography for Determining the Velocity Model of Rayleigh Wave in Java Island, Indonesia

2018 ◽  
Vol 5 (1) ◽  
pp. 9-13
Author(s):  
Muhajir Anshori ◽  
◽  
Sukir Maryanto ◽  
Tri Deni Rahman ◽  
Azwar Panshori
Keyword(s):  
Rayleigh Wave ◽  
Ambient Noise ◽  
Velocity Model ◽  
Ambient Noise Tomography

scholarly journals Velocity structure of the Whataroa Valley using Ambient Noise Tomography

2021 ◽  
Author(s):  
◽  
Andy McNab
Keyword(s):  
Rayleigh Wave ◽  
Group Velocity ◽  
Shear Wave Velocity ◽  
Correlation Functions ◽  
Ambient Noise ◽  
Cross Correlation ◽  
Velocity Dispersion ◽  
Group Velocity Dispersion ◽  
Velocity Model ◽  
Ambient Noise Tomography

<p>This thesis applies ambient noise tomography to investigate the shallow structure of the Whataroa Valley. Ambient noise techniques are applied to continuous seismic recordings acquired on 158 geophones deployed during the Whataroa Active Source Seismic Experiment. Despite only having four days of data, a robust shear-wave velocity model is calculated using a phase-weighted stacking approach to improve the cross-correlation functions' signal-to-noise ratios, allowing for robust velocity measurements to be obtained between periods of 0.3 and 1.8\,s. This yields a database of 12,500 vertical component cross correlation functions and the corresponding Rayleigh wave phase and group velocity dispersion curves. Linearised straight-ray tomography is applied to phase and group velocity dispersion measurements at periods ranging from periods of 0.3 to 1.8\,s. The tomography reveals a velocity that decreases from the vicinity of the DFDP-2B borehole to the centre of the valley. This is interpreted to be the geologic basement deepening towards the centre of the valley. A Monte-Carlo inversion technique is used to jointly invert Rayleigh-wave phase and group velocity dispersion curves constructed from phase and group velocity tomography maps of successively higher periods. Linear interpolation of the resulting 1D shear-wave velocity profiles produces a pseudo-3D velocity model of the uppermost 1,000\,m of the Whataroa Valley. Using sharp increases in velocity to represent lithological change, we interpret two velocity contours at 1,150 and 1,250\,m/s as potential sediment-basement contacts. Depth isocontours of these velocities reveal that the basement deepens towards the centre of the valley, reaching a maximum depth of 400 or 600\,m for the 1,150 and 1,250\,m/s velocity contours respectively. These depths indicate strong glacial over-deepening and have implications for future drilling projects in the Whataroa Valley. A sharp velocity increase of 200\,m/s also occurs at 100\,m depth at the DFDP-2B borehole. We interpret this to be a change in sedimentary rock lithology from fluvial gravels to lacustrine silty sands, related to a change in sedimentary depositional environment.</p>

scholarly journals Velocity structure of the Whataroa Valley using Ambient Noise Tomography

2021 ◽  
Author(s):  
◽  
Andy McNab
Keyword(s):  
Rayleigh Wave ◽  
Group Velocity ◽  
Shear Wave Velocity ◽  
Correlation Functions ◽  
Ambient Noise ◽  
Cross Correlation ◽  
Velocity Dispersion ◽  
Group Velocity Dispersion ◽  
Velocity Model ◽  
Ambient Noise Tomography

<p>This thesis applies ambient noise tomography to investigate the shallow structure of the Whataroa Valley. Ambient noise techniques are applied to continuous seismic recordings acquired on 158 geophones deployed during the Whataroa Active Source Seismic Experiment. Despite only having four days of data, a robust shear-wave velocity model is calculated using a phase-weighted stacking approach to improve the cross-correlation functions' signal-to-noise ratios, allowing for robust velocity measurements to be obtained between periods of 0.3 and 1.8\,s. This yields a database of 12,500 vertical component cross correlation functions and the corresponding Rayleigh wave phase and group velocity dispersion curves. Linearised straight-ray tomography is applied to phase and group velocity dispersion measurements at periods ranging from periods of 0.3 to 1.8\,s. The tomography reveals a velocity that decreases from the vicinity of the DFDP-2B borehole to the centre of the valley. This is interpreted to be the geologic basement deepening towards the centre of the valley. A Monte-Carlo inversion technique is used to jointly invert Rayleigh-wave phase and group velocity dispersion curves constructed from phase and group velocity tomography maps of successively higher periods. Linear interpolation of the resulting 1D shear-wave velocity profiles produces a pseudo-3D velocity model of the uppermost 1,000\,m of the Whataroa Valley. Using sharp increases in velocity to represent lithological change, we interpret two velocity contours at 1,150 and 1,250\,m/s as potential sediment-basement contacts. Depth isocontours of these velocities reveal that the basement deepens towards the centre of the valley, reaching a maximum depth of 400 or 600\,m for the 1,150 and 1,250\,m/s velocity contours respectively. These depths indicate strong glacial over-deepening and have implications for future drilling projects in the Whataroa Valley. A sharp velocity increase of 200\,m/s also occurs at 100\,m depth at the DFDP-2B borehole. We interpret this to be a change in sedimentary rock lithology from fluvial gravels to lacustrine silty sands, related to a change in sedimentary depositional environment.</p>

Crustal and upper mantle velocity structure of the Pannonian Region using Rayleigh wave ambient noise tomography

2021 ◽  
Author(s):  
Máté Timkó ◽  
Lars Wiesenberg ◽  
Amr El-Sharkawy ◽  
Zoltán Wéber ◽  
Thomas Meier ◽  
...  
Keyword(s):  
Rayleigh Wave ◽  
Ambient Noise ◽  
Velocity Structure ◽  
Pannonian Basin ◽  
Vertical Component ◽  
High Heat ◽  
Moho Depth ◽  
Ambient Noise Tomography ◽  
Period Range ◽  
Waveform Data

&lt;p&gt;The Pannonian Basin is located in Central-Europe surrounded by the Alpine, Carpathian, and Dinarides mountain ranges. This is a back-arc basin characterized by shallow Moho depth, updoming mantle and high heat flow. In this study, we present the results of the Rayleigh wave based ambient noise tomography to investigate the velocity structure of the Carpathian-Pannonian region.&amp;#160;&lt;/p&gt;&lt;p&gt;For the ambient noise measurements, we collected the continuous waveform data from more than 1280 seismological stations from the broader Central-Eastern European region. This dataset embraces all the permanent and the temporary (AlpArray, PASSEQ, CBP, SCP) stations from the 9-degree radius of the Pannonian Basin which were operating between the time period between 2005 and 2018. All the possible vertical component noise cross-correlation functions were calculated and all phase velocity curves were determined in the 5-80 s period range using an automated measuring algorithm.&amp;#160;&lt;/p&gt;&lt;p&gt;The collected dispersion measurements were then used to create tomographic images that are characterized by similar velocity anomalies in amplitude, pattern and location that are consistent with the well-known tectonic and geologic structure of the research area and are comparable to previous tomographic models published in the literature.&lt;/p&gt;

scholarly journals Group velocity maps using subspace and Trans-dimensional inversions: ambient noise tomography in the Western part of Java, Indonesia

2019 ◽  
Author(s):  
Shindy Rosalia ◽  
Phil Cummins ◽  
Sri Widiyantoro ◽  
Tedi Yudistira ◽  
Andri Dian Nugraha ◽  
...  
Keyword(s):  
Rayleigh Wave ◽  
Group Velocity ◽  
Ambient Noise ◽  
Regularization Parameter ◽  
Least Square ◽  
Disaster Mitigation ◽  
Wave Group ◽  
Ambient Noise Tomography ◽  
Waveform Data ◽  
Subspace Optimization

Summary In this paper, we compare two different methods for group velocity inversion: iterative, least-squares subspace optimization, and probabilistic sampling based on the Trans-dimensional Bayesian method with tree-based wavelet parameterization. The wavelet parameterization used a hierarchical prior for wavelet coefficients which could adapt to the data. We applied these inversion methods for ambient noise tomography of the western part of Java, Indonesia. This area is an area prone to multiple geological hazards due to its proximity to the subduction of the Australia Plate beneath Eurasia. It is therefore important to have a better understanding of upper crustal structure to support seismic hazard and disaster mitigation efforts in this area. We utilized a new waveform dataset collected from 85 temporary seismometers deployed during 2016–2018. Cross-correlation of the waveform data was applied to retrieve empirical Rayleigh wave Green's functions between station pairs, and the spatial distribution of group velocity was obtained by inverting dispersion curves. Our results show that, although computationally expensive, the Trans-dimensional Bayesian approach offered important advantages over optimization, including more effective explorative of the model space and more robust characterization of the spatial pattern of Rayleigh wave group velocity. Meanwhile, the iterative, least-square subspace optimization suffered from the subjectivity of choice for reference velocity model and regularization parameter values. Our Rayleigh wave group velocity results show that for short (1–10 s) periods group velocity correlates well with surface geology, and for longer periods (13–25 s) it correlates with centers of volcanic activity.

scholarly journals Rayleigh wave group velocities at periods of 6–23 s across Brazil from ambient noise tomography

2015 ◽  
Vol 203 (2) ◽  
pp. 869-882 ◽  
Author(s):  
Bruno Goutorbe ◽  
Diogo Luiz de Oliveira Coelho ◽  
Stéphane Drouet
Keyword(s):  
Rayleigh Wave ◽  
Ambient Noise ◽  
Wave Group ◽  
Ambient Noise Tomography ◽  
Group Velocities

Upper crustal structure at the KTB drilling site from ambient noise tomography

2020 ◽  
Author(s):  
Ehsan Qorbani ◽  
Irene Bianchi ◽  
Petr Kolínský ◽  
Dimitri Zigone ◽  
Götz Bokelmann
Keyword(s):  
Ambient Noise ◽  
Velocity Model ◽  
Ambient Noise Tomography ◽  
Data Set ◽  
Crustal Rocks ◽  
Velocity Models ◽  
Path Coverage ◽  
Passive Seismic ◽  
Cross Correlations ◽  
Drilling Site

&lt;p&gt;In this study, we show results from ambient noise tomography at the KTB drilling site, Germany. The Continental Deep Drilling Project, or &amp;#8216;Kontinentales Tiefbohrprogramm der Bundesrepublik Deutschland&amp;#8217; (KTB) is at the northwestern edge of the Bohemian Massif and is located on the Variscan belt of Europe. During the KTB project crustal rocks have been drilled down to 9 km depth and several active seismic studies have been performed in the surrounding. The KTB area therefore presents an ideal test area for testing and verifying the potential resolution of passive seismic techniques. The aim of this study is to present a new shear-wave velocity model of the area while comparing the results to the previous velocity models and hints for anisotropy depicted by former passive and active seismological studies. We use a unique data set composed of two years of continuous data recorded at nine 3-component temporary stations installed from July 2012 to July 2014 located on top and vicinity of the drilling site. Moreover, we included a number of permanent stations in the region in order to improve the path coverage and density. Cross correlations of ambient noise are computed between the station pairs using all possible combination of three-component data. Dispersion curves of surface waves are extracted and are then inverted to obtain group velocity maps. We present here a new velocity model of the upper crust of the area, which shows velocity variations at short scales that correlate well with geology in the region.&lt;/p&gt;

3-D crustal structure of the Iran plateau using phase velocity ambient noise tomography

2019 ◽  
Vol 220 (3) ◽  
pp. 1555-1568 ◽  
Author(s):  
R Movaghari ◽  
G Javan Doloei
Keyword(s):  
Phase Velocity ◽  
Shear Wave ◽  
Wave Velocity ◽  
Crustal Structure ◽  
Shear Wave Velocity ◽  
Ambient Noise ◽  
Velocity Model ◽  
Central Iran ◽  
Ambient Noise Tomography ◽  
Iran Plateau

SUMMARY More accurate crustal structure models will help us to better understand the tectonic convergence between Arabian and Eurasian plates in the Iran plateau. In this study, the crustal and uppermost mantle velocity structure of the Iran plateau is investigated using ambient noise tomography. Three years of continuous data are correlated to retrieve Rayleigh wave empirical Green's functions, and phase velocity dispersion curves are extracted using the spectral method. High-resolution Rayleigh wave phase velocity maps are presented at periods of 8–60 s. The tomographic maps show a clear consistency with geological structures such as sedimentary basins and seismotectonic zones, especially at short periods. A quasi-3-D shear wave velocity model is determined from the surface down to 100 km beneath the Iran plateau. A transect of the shear wave velocity model has been considered along with a profile extending across the southern Zagros, the Sanandaj-Sirjan Zone (SSZ), the Urumieh-Dokhtar Magmatic Arc (UDMA) and Central Iran and Kopeh-Dagh (KD). Obvious crustal thinning and thickening are observable along the transect of the shear wave velocity model beneath Central Iran and the SSZ, respectively. The observed shear wave velocities beneath the Iran plateau, specifically Central Iran, support the slab break-off idea in which low density asthenospheric materials drive towards the upper layers, replacing materials in the subcrustal lithosphere.

Ambient noise tomography of Gran Canaria island (Canary Islands)

2021 ◽  
Author(s):  
Iván Cabrera Pérez ◽  
Jean Soubestre ◽  
Luca D'Auria ◽  
Germán Cervigón-Tomico ◽  
David Martínez van Dorth ◽  
...  
Keyword(s):  
Group Velocity ◽  
Canary Islands ◽  
Ambient Noise ◽  
Velocity Model ◽  
Dispersion Curves ◽  
Ambient Noise Tomography ◽  
Gran Canaria ◽  
Geothermal Reservoirs ◽  
Velocity Models ◽  
Non Linear

&lt;p&gt;The island of Gran Canaria is located in the Canarian Archipelago, with an area of 1560 km&lt;sup&gt;2 &lt;/sup&gt;and a maximum altitude of 1956 m.a.s.l., being the third island of the archipelago in terms of extension and altitude. The island has two very well differentiated geological domains: the southwest domain or Paleo-Canarias, which is the geologically oldest part, and the northeast domain or Neo-Canarias, where are located the vents of the most recent Holocene eruptions. This volcanic island hosted Holocene eruptions. Therefore, apart from being affected by volcanic risk, it potentially hosts geothermal resources that could be exploited to increase the percentage of renewable energy in the Canary Islands.&lt;/p&gt;&lt;p&gt;The main objective of this work is to use Ambient Noise Tomography (ANT) for retrieving a high-resolution seismic velocity model of the first few kilometres of the crust, to improve local earthquake location and detect anomalies potentially related to active geothermal reservoirs. Currently, the 1-D velocity model of the island does not allow a correct determination of the hypocenters, being unable to take into account the substantial horizontal velocity contrasts correctly.&lt;/p&gt;&lt;p&gt;To realize the ANT, we deployed 28 temporary broadband seismic stations in two phases. Each campaign lasted at least one month. We also exploited data recorded by the permanent seismic network Red S&amp;#237;smica Canaria (C7) operated by INVOLCAN. After applying standard data processing to retrieve Green&amp;#8217;s functions from ambient noise cross-correlations, we retrieved the dispersion curves using the FTAN (Frequency Time ANalysis) technique. The inversion of dispersion curves to obtain group velocity maps was realized using a novel non-linear multiscale tomographic approach (MAnGOSTA, Multiscale Ambient NOiSe TomogrAphy). The forward modelling of surface waves traveltimes was implemented using a shortest-path algorithm that allows the topography to be taken into account. The MANgOSTA method consists of successive non-linear inversion steps on progressively finer grids. This technique allows retrieving 2-D group velocity models in the presence of substantial velocity contrasts with up to 100% of the relative variation. Then, we performed a depth inversion of the Rayleigh wave dispersion curves using a transdimensional Bayesian formulation. The final result is a 3-D model of P- and S-wave velocities of the island. The preliminary results show the presence of a low-velocity zone in the eastern part of the island that coincides spatially with anomalies observed in previous geophysical and geochemical studies and which could be related to actual or fossil geothermal reservoirs. Furthermore, the model shows the presence of high-velocity anomalies that are associated with the mafic core of the island.&lt;/p&gt;

Sign in / Sign up

Export Citation Format

Share Document