scholarly journals Novel Neural network single sensor MPPT for Proton Exchange Membrane Fuel Cell

2021 ◽  
Vol 24 (1) ◽  
pp. 43-48
Author(s):  
Abdelghani Harrag

This paper presents a new neural network single sensor maximum power point tracking algorithm controlling the DC-DC boost converter to guarantee the transfer of the proton exchange membrane fuel cell maximum generated power to the load. The implemented neural network single sensor controller has been developed and trained firstly in offline mode using single sensor maximum power point tracking data obtained previously; and secondly used in online mode to track the maximum output power of the fuel cell power system. Comparative simulation results prove the superiority of the proposed neural network single sensor maximum power point compared to the single sensor one especially in transit response reducing by the way the overshoot and the tracking time which leads to an overall energy losses reduction. In addition, the implemented neural network single sensor MPPT employs only one sensor which will reduce the complexity and the cost of PEM fuel cell power system. To our knowledge, this study is a pioneering work using a neural network single sensor controller as PEM fuel cell MPPT.

Author(s):  
Badreddine KANOUNI ◽  
◽  
Abd Essalam BADOUD ◽  
Saad MEKHILEF ◽  
◽  
...  

Fuel cells output power depends on the operating conditions, including cell temperature, oxygen pressure, hydrogen pressure, tempureter . In each particular condition, there is only one unique operating point for a fuel cell system with the maximum output. Thus, a maximum power point tracking (MPPT) controller is needed to increase the efficiency of the PEMFC systems. In this paper an efficient method fuzzy logic controller is proposed for MPPT of the proton exchange membrane (PEM) fuel cells, boost converter. FLC adjusts the operating point of the PEM fuel cell to the maximum power by tuning of the boost converter duty cycle. To demonstrate the performance of the proposed algorithm, simulation results are sumulated in two cases, in normel condution and variation in temperature .the FLC algorithm with fast convergence, high accuracy and very low power fluctuations tracks the maximum power point of the fuel cell system


IEEE Access ◽  
2021 ◽  
pp. 1-1
Author(s):  
Jye Yun Fam ◽  
Shen Yuong Wong ◽  
Hazrul Mohamed Basri ◽  
Mohammad Omar Abdullah ◽  
Kasumawati Lias ◽  
...  

Author(s):  
Jianxin Liu ◽  
Tiebiao Zhao ◽  
YangQuan Chen

Proton Exchange Membrane FC (PEMFC) is widely recognized as a potentially renewable and green energy source based on hydrogen. Maximum power point tracking (MPPT) is one of the most important working conditions to be considered. In order to improve the searching performance such as convergence and robustness under disturbance and uncertainty, a kind of fractional order low pass filter (FOLPF) is applied for the MPPT controller design based on general Extremum Seeking Control (ESC). The controller is designed with FOLPF and high pass filter (HPF) substituting the normal LPF and HPF in the original ESC design. With this FOLPF ESC, better convergence and smooth performance is gained while maintaining the robust specifications. Simulation results are included to validate the proposed new FOLPF ESC scheme under disturbance and comparisons between FOLPF ESC and general ESC method are also provided.


Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3260
Author(s):  
Ming-Fa Tsai ◽  
Chung-Shi Tseng ◽  
Kuo-Tung Hung ◽  
Shih-Hua Lin

In this study, based on the slope of power versus voltage, a novel maximum-power-point tracking algorithm using a neural network compensator was proposed and implemented on a TI TMS320F28335 digital signal processing chip, which can easily process the input signals conversion and the complex floating-point computation on the neural network of the proposed control scheme. Because the output power of the photovoltaic system is a function of the solar irradiation, cell temperature, and characteristics of the photovoltaic array, the analytic solution for obtaining the maximum power is difficult to obtain due to its complexity, nonlinearity, and uncertainties of parameters. The innovation of this work is to obtain the maximum power of the photovoltaic system using a neural network with the idea of transferring the maximum-power-point tracking problem into a proportional-integral current control problem despite the variation in solar irradiation, cell temperature, and the electrical load characteristics. The current controller parameters are determined via a genetic algorithm for finding the controller parameters by the minimization of a complicatedly nonlinear performance index function. The experimental result shows the output power of the photovoltaic system, which consists of the series connection of two 155-W TYN-155S5 modules, is 267.42 W at certain solar irradiation and ambient temperature. From the simulation and experimental results, the validity of the proposed controller was verified.


Sign in / Sign up

Export Citation Format

Share Document