A DETERMINATION OF THE SHEAR FORCE OF THIN HIGH-COERCIVITY PERMANENT MAGNETS MADE FROM THE ALLOY WITH RARE-EARTH ELEMENTS

2021 ◽  
pp. 24-30
Author(s):  
A. Ya. Krasilʼnikov ◽  
A. A. Krasilʼnikov
Keyword(s):  
Rare Earth ◽  
Magnetic Flux ◽  
Rare Earth Elements ◽  
Standard Method ◽  
Shear Force ◽  
Permanent Magnets ◽  
High Coercivity ◽  
Research Results ◽  
Magnetic Couplings

The article considers the possibility of using a standard method for calculating the shear force of thin, high-coercivity neodymium–iron–boron type permanent magnets in magnetic clutches (couplings). The research results allowed to introduce a correction coefficients in the method of calculating the transmitting torque in magnetic clutches (couplings) with thin magnets. The possibility of 08H22N6T brand steel using for magnetic flux conductors manufacturing in a magnetic couplings.

Determination of the shear force of high-coercive permanent magnets from an alloy of neodymium—iron—boron rare-earth elements of 5 mm thickness

2020 ◽  
pp. 7-10
Author(s):  
A.Ya. Krasil'nikov ◽  
A.A. Krasilnikov ◽  
D.V. Taranov
Keyword(s):  
Rare Earth ◽  
Shear Force ◽  
Permanent Magnets ◽  
Magnetic System ◽  
Magnetic Coupling ◽  
Magnetic Systems ◽  
Neodymium Iron Boron ◽  
Magnetic Couplings ◽  
Standard Calculation

The possibility of applying the standard calculation of the shear force of thin high-coercive neodymium— iron—boron permanent magnets in magnetic systems and magnetic couplings is considered. A correction factor is proposed for calculating the shear force in systems with thin magnets, which allows at the stage of developing sealed equipment to calculate the shear force of permanent magnets in these systems. Keywords: magnetic system, magnetic coupling, permanent magnet, shear force. [email protected]

scholarly journals Optimisation of Permanent Magnets of Bioreactor Magnetic Coupling while Preserving their Efficiency

2019 ◽  
Vol 56 (4) ◽  
pp. 38-48
Author(s):  
M. Konuhova ◽  
E. Kamolins ◽  
S. Orlova ◽  
A. Suleiko ◽  
R. Otankis
Keyword(s):  
Rare Earth ◽  
Rare Earth Elements ◽  
Permanent Magnets ◽  
Magnetic Coupling ◽  
Economic Aspect ◽  
Maximum Torque ◽  
Factors Affecting ◽  
Magnetic Couplings ◽  
Breakaway Torque

Abstract The paper discusses issues related to the optimisation of magnetic couplings used in bioreactors (manufactured by JSC “Biotehniskais Centrs”). The purpose of optimisation was to preserve the maximum breakaway torque of the magnetic coupling while reducing the mass of rare earth elements used in its structure. The paper presents the rationale for the selected optimisation option taking into account the economic aspect. To solve the optimisation problem, the factors affecting the maximum torque of the magnetic coupling, such as the shape and height of the internal and external magnets, the angle of the external and internal magnets, as well as the height of the internal and external yoke, were determined. The design of the existing magnetic coupling was optimised and its prototype was made based on the results of optimisation. The results obtained by means of optimisation were compared with the results obtained experimentally by testing the manufactured prototype.

The fluorimetric determination of cerium and terbium

1989 ◽  
Vol 54 (3) ◽  
pp. 616-621 ◽  
Author(s):  
Záviš Holzbecher
Keyword(s):  
Rare Earth ◽  
Detection Limit ◽  
Rare Earth Elements ◽  
Fluorimetric Determination ◽  
Fluorescence Maximum ◽  
Relative Standard ◽  
And Shifts ◽  
Hcl Medium ◽  
Fold Excess

It has been found that phosphoric acid decreases the first excitation maximum of Ce(III) at 256 nm, increases the second excitation maximum at 297 nm and shifts the fluorescence maximum from 350 to 346 nm. Under optimum conditions, with λexc = 297 nm and λem = 346 nm, Ce(III) can be determined fluorimetrically with a detection limit of 1.2 ng ml-1 in 12M-H3PO4 medium. No interference was observed from a 20-200 fold excess of HCl, H2SO4, Na, K, NH4+, Al and the rare earth elements. HNO3 interferes and Ce(IV) and Fe(III) interfere strongly. It follows from the stereofluorograms of Ce and Tb that the spectra of the two elements are practically independent. The detection limit for Tb(III) in 0.02-2.5M-H2SO4 medium for λexc = 222 nm and λem = 494 nm is 33 ng ml-1. No interference was observed from a 5-20 fold excess of Al3+ and the other rare earth elements. The determination is slightly less sensitive in H3PO4 or HCl medium. The relative standard deviation of the measurement for 10 ng ml-1 Ce(III) or 50 ng ml-1 Tb(III) is about 3%.

Sign in / Sign up

Export Citation Format

Share Document