Expanded test frequency band and improved field uniformity in a reverberation chamber for networked system by dual-band quadratic residue diffusers

2022 ◽  
Vol 12 (1) ◽  
pp. 80
Author(s):  
Eugene Rhee
Keyword(s):  
Frequency Band ◽  
Quadratic Residue ◽  
Dual Band ◽  
Test Frequency ◽  
Reverberation Chamber ◽  
Networked System ◽  
Field Uniformity

Electric Field Uniformity Characteristic of a Reverberation Chamber with a Composite QRD

2013 ◽  
Vol 684 ◽  
pp. 518-521
Author(s):  
Eugene Rhee ◽  
Ji Hoon Lee
Keyword(s):  
Electric Field ◽  
Electromagnetic Compatibility ◽  
Quadratic Residue ◽  
Test Facility ◽  
Uniform Electric Field ◽  
Reverberation Chamber ◽  
Standard Requirement ◽  
International Standard ◽  
Field Uniformity ◽  
Simulation Results

This paper presents the electric field characteristics in a reverberation chamber which is an electromagnetic compatibility test facility that uses a stirrer to generate a uniform electric field inside it. In this paper, a diffuser is introduced from acoustics and newly designed to overcome problems of a stirrer. To validate the effect of a diffuser, a composite quadratic residue diffuser and a reverberation chamber are modeled. Then, the field uniformity inside the reverberation chamber is simulated by XFDTD 6.2 simulation program. Simulation results show that the electric field uniformity in the reverberation chamber satisfies the international standard requirement. This shows that the composite quadratic residue diffuser can be substituted for a stirrer.

Research on Characteristics of Field Uniformity in Reverberation Chamber Using Two TX Antennas

2012 ◽  
Vol E95.B (7) ◽  
pp. 2386-2392
Author(s):  
Jung-Hoon KIM ◽  
Tae-Heon JANG ◽  
Sung-Kuk LIM ◽  
Songjun LEE ◽  
Sung-Il YANG
Keyword(s):  
Reverberation Chamber ◽  
Field Uniformity

The Field Uniformity Analysis in a Triangular Prism Reverberation Chamber with a QRD

2011 ◽  
Vol E94-B (1) ◽  
pp. 334-337 ◽  
Author(s):  
Jung-Hoon KIM ◽  
Hye-Kwang KIM ◽  
Eugene RHEE ◽  
Sung-Il YANG
Keyword(s):  
Triangular Prism ◽  
Reverberation Chamber ◽  
Field Uniformity

Improving Field Uniformity Using Source Stirring With Orbital Angular Momentum Modes in a Reverberation Chamber

2019 ◽  
Vol 29 (8) ◽  
pp. 560-562 ◽  
Author(s):  
Xiaoming Chen ◽  
Wei Xue ◽  
Hongyu Shi ◽  
Luyi Wang ◽  
Shitao Zhu ◽  
...  
Keyword(s):  
Angular Momentum ◽  
Orbital Angular Momentum ◽  
Reverberation Chamber ◽  
Field Uniformity

A Novel Design of Frequency Reconfigurable Antenna for UWB Application

Frequenz ◽  
2016 ◽  
Vol 70 (9-10) ◽  
Author(s):  
Xiaolin Yang ◽  
Ziliang Yu ◽  
Zheng Wu ◽  
Huajiao Shen
Keyword(s):  
Frequency Band ◽  
Dual Band ◽  
Reconfigurable Antenna ◽  
Pin Diodes ◽  
Notched Band ◽  
Uwb Applications ◽  
Novel Design ◽  
Frequency Reconfigurable Antenna

AbstractIn this paper, we present a novel frequency reconfigurable antenna which could be easily operate in a single notched-band (WiMAX (3.3–3.6 GHz)) UWB frequency band, another single notched-band (WLAN (5–6 GHz)) UWB frequency band and the dual band-notched UWB frequency band (the stopband covers the WiMAX (3.3–3.6 GHz) and WLAN (5–6 GHz)). The reconfigurability is achieved by changing the states of PIN diodes. The simulated results are in agreement well with the measured results. And the measured patterns are slightly changed with antenna reconfiguration. The proposed antenna is a good candidate for various UWB applications.

scholarly journals Miniaturized Circularly Polarized Stacked Patch Antenna on Reactive Impedance Surface for Dual-Band ISM and WiMAX Applications

2015 ◽  
Vol 2015 ◽  
pp. 1-10 ◽  
Author(s):  
Kush Agarwal ◽  
Saugata Dutta
Keyword(s):  
Frequency Band ◽  
Patch Antenna ◽  
Axial Ratio ◽  
Dual Band ◽  
Impédance Surface ◽  
Impedance Surface ◽  
Circularly Polarized ◽  
Microstrip Patch ◽  
Lower Band ◽  
Lower Frequency Band

This paper proposes a compact microstrip patch antenna for operating in 2.4 GHz ISM and 3.5 GHz WiMAX bands with circularly polarized (CP) radiation. The CP radiation in dual-bands is a result of two multilayered truncated corner stacked square patches, while the reactive impedance surface (RIS) is used for antenna size miniaturization for the lower operating frequency band. Since the overall lateral antenna dimensions are controlled by the lower frequency band (higher wavelength), reducing the electrical size of the antenna for lower band results in overall smaller antenna dimensions. The measured 3-dB axial ratio bandwidths of the in-house fabricated antenna prototype are 6.1% (2.40–2.55 GHz) for the lower band and 5.7% (3.40–3.60 GHz) for the upper band, while the 10-dBS11bandwidths for the two bands are 8.1% (2.39–2.59 GHz) and 6.9% (3.38–3.62 GHz), respectively. The maximum gain at boresight for the lower band is 2.93 dBic at 2.5 GHz, while the gain for the upper band is 6.26 dBic at 3.52 GHz. The overall volume of the proposed antenna is 0.292λo × 0.292λo × 0.044λo, whereλois the corresponding free-space wavelength at 2.5 GHz.

Dual-band low-profile planar antenna for mobile communication application

2015 ◽  
Vol 9 (2) ◽  
pp. 447-452 ◽  
Author(s):  
Xi-Wang Dai ◽  
Tao Zhou ◽  
Bo-Ran Guan
Keyword(s):  
Frequency Band ◽  
Mobile Communication ◽  
High Frequency ◽  
Microstrip Line ◽  
Low Frequency ◽  
Dual Band ◽  
Planar Antenna ◽  
Frequency Resonance ◽  
Low Profile ◽  
High Frequency Resonance

A novel dual-band planar antenna with a low profile for mobile communication system is proposed in this paper. The antenna is composed of one shorted patch with two radiating notches for low frequency resonance and one square patch for high frequency resonance. The low profile is achieved via the shorting patch, which introduces the parallel electrical field between the reflector and antenna. A step-impedance microstrip line is used to feed the antenna. The coupling between the square patch and microstrip line cancels out the inductance of shorting probe, which increases the working bandwidth of proposed antenna. A prototype with a low profile of 0.0286λ is fabricated and measured. The antenna achieves dual impedance bandwidths of 1.6% for the low frequency band and 60% for the high frequency band, covering the frequency range 851–865 MHz and 1.97–3.65 GHz, respectively. The measured results show good agreements with the simulated ones.

Sign in / Sign up

Export Citation Format

Share Document