scholarly journals Self-assembled metal-oxide nanoparticles on GaAs: infrared absorption enabled by localized surface plasmons

Nanophotonics ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Eduardo Martínez Castellano ◽  
Julen Tamayo-Arriola ◽  
Miguel Montes Bajo ◽  
Alicia Gonzalo ◽  
Lazar Stanojević ◽  
...  

Abstract Metal-oxides hold promise as superior plasmonic materials in the mid-infrared compared to metals, although their integration over established material technologies still remains challenging. We demonstrate localized surface plasmons in self-assembled, hemispherical CdZnO metal-oxide nanoparticles on GaAs, as a route to enhance the absorption in mid-infrared photodetectors. In this system, two localized surface plasmon modes are identified at 5.3 and 2.7 μm, which yield an enhancement of the light intensity in the underlying GaAs. In the case of the long-wavelength mode the enhancement is as large as 100 near the interface, and persists at depths down to 50 nm. We show numerically that both modes can be coupled to infrared intersubband transitions in GaAs-based multiple quantum wells, yielding an absorbed power gain as high as 5.5, and allowing light absorption at normal incidence. Experimentally, we demonstrate this coupling in a nanoparticle/multiple quantum well structure, where under p-polarization the intersubband absorption is enhanced by a factor of 2.5 and is still observed under s-polarization, forbidden by the usual absorption selection rules. Thus, the integration of CdZnO on GaAs can help improve the figures of merit of quantum well infrared photodetectors, concept that can be extended to other midinfrared detector technologies.

2002 ◽  
Vol 38 (25) ◽  
pp. 1744
Author(s):  
M. Wada ◽  
S. Araki ◽  
T. Kudou ◽  
T. Umezawa ◽  
S. Nakajima ◽  
...  

2010 ◽  
Vol 347 (1-2) ◽  
pp. 26-31 ◽  
Author(s):  
Ke Li ◽  
Gongbo Ye ◽  
Jingjing Pan ◽  
Haining Zhang ◽  
Mu Pan

Author(s):  
Sagadevan Suresh ◽  
Selvaraj Vennila ◽  
J. Anita Lett ◽  
Is Fatimah ◽  
Faruq Mohammad ◽  
...  

2021 ◽  
Vol 23 (8) ◽  
Author(s):  
Eliecer Peláez Sifonte ◽  
Fidel Antonio Castro-Smirnov ◽  
Argenis Adrian Soutelo Jimenez ◽  
Héctor Raúl González Diez ◽  
Fernando Guzmán Martínez

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
N. C. Angastiniotis ◽  
S. Christopoulos ◽  
K. C. Petallidou ◽  
A. M. Efstathiou ◽  
A. Othonos ◽  
...  

AbstractA bulk scale process is implemented for the production of nanostructured film composites comprising unary or multi-component metal oxide nanoparticles dispersed in a suitable polymer matrix. The as-received nanoparticles, namely Al$$_2$$ 2 O$$_3$$ 3 , SiO$$_2$$ 2 and TiO$$_2$$ 2 and binary combinations, are treated following specific chemical and mechanical processes in order to be suspended at the optimal size and composition. Subsequently, a polymer extrusion technique is employed for the fabrication of each film, while the molten polymer is mixed with the treated metal oxide nanoparticles. Transmission and reflection measurements are performed in order to map the optical properties of the fabricated, nanostructured films in the UV, VIS and IR. The results substantiate the capability of the overall methodology to regulate the optical properties of the films depending on the type of nanoparticle formation which can be adjusted both in size and composition.


Sign in / Sign up

Export Citation Format

Share Document