scholarly journals Combining whispering gallery mode lasers and microstructured optical fibers: limitations, applications and perspectives for in-vivo biosensing

MRS Advances ◽  
2016 ◽  
Vol 1 (33) ◽  
pp. 2309-2320
Author(s):  
Alexandre François ◽  
Tess Reynolds ◽  
Nicolas Riesen ◽  
Jonathan M. M. Hall ◽  
Matthew R. Henderson ◽  
...  

ABSTRACTWhispering gallery modes (WGMs) have been widely studied over the past 20 years for various applications, including biological sensing. While the WGM-based sensing approaches reported in the literature have shown tremendous performance down to single molecule detection, at present such sensing technologies are not yet mature and still have significant practical constraints that limit their use in real-world applications. Our work has focused on developing a practical, yet effective, WGM-based sensing platform capable of being used as a dip sensor for in-vivo biosensing by combining WGM fluorescent microresonators with silica Microstructured Optical Fibers (MOFs).We recently demonstrated that a suspended core MOF with a dye-doped polymer microresonator supporting WGMs positioned onto the tip of the fiber, can be used as a dip sensor. In this architecture the resonator is anchored to one of the MOF air holes, in contact with the fiber core, enabling a significant portion of the evanescent field from the fiber to overlap with the sphere and hence excite the fluorescent WGMs. This architecture allows for remote excitation and collection of the WGMs. The fiber also permits easy manipulation of the microresonator for dip sensing applications, and hence alleviates the need for a complex microfluidic interface. More importantly, it allows for an increase in both the excitation and collection efficiency compared to free space coupling, and also improves the Q factor.In this paper we present our recent results on microstructured fiber tip WGM-based sensors and show that this sensing platform can be used in clinical diagnostics, for detecting various clinically relevant biomarkers in complex clinical samples.

Sensors ◽  
2020 ◽  
Vol 20 (9) ◽  
pp. 2555
Author(s):  
Diego Lopez-Torres ◽  
Cesar Elosua ◽  
Francisco J. Arregui

Since the first publications related to microstructured optical fibers (MOFs), the development of optical fiber sensors (OFS) based on them has attracted the interest of many research groups because of the market niches that can take advantage of their specific features. Due to their unique structure based on a certain distribution of air holes, MOFs are especially useful for sensing applications: on one hand, the increased coupling of guided modes into the cladding or the holes enhances significantly the interaction with sensing films deposited there; on the other hand, MOF air holes enhance the direct interaction between the light and the analytes that get into in these cavities. Consequently, the sensitivity when detecting liquids, gasses or volatile organic compounds (VOCs) is significantly improved. This paper is focused on the reported sensors that have been developed with MOFs which are applied to detection of gases and VOCs, highlighting the advantages that this type of fiber offers.


2008 ◽  
Author(s):  
Felipe Beltrán-Mejía ◽  
Enrique Silvestre ◽  
Pedro Andrés ◽  
Cristiano M. B. Cordeiro ◽  
Christiano J. S. de Matos

2007 ◽  
Author(s):  
Minh Châu Phan Huy ◽  
Guillaume Laffont ◽  
Véronique Dewynter ◽  
Pierre Ferdinand ◽  
Dominique Pagnoux ◽  
...  

2021 ◽  
Author(s):  
Dinesh Kumar Sharma ◽  
Saurabh Mani Tripathi

Abstract The advent of polymer (or plastic) optical fibers (POFs) with porous cross-section has contributed significantly to the sensing applications. We intend to explore the sensing attributes of polymer-based one-rod core microstructured optical fibers (P-MOFs) via utilizing an auxiliary approach. The sensitivity coefficient and the overlapping factor of P-MOF’s introduced design in air-filled and water-filled layouts against the structural parameters are exploited. We reported the overlapping factor of ~ 94% and ~ 82% for the said configurations of the fibers, respectively, at the wavelength of 0.633 µm. The confinement loss, mode-index, and effective mode-area are also evaluated for the anticipated structures. For assessing the confinement loss, an alternative approach based on double-clad fiber (DCF) approximation is employed. The validity of the simulated results is scrutinized with those as documented in the literature. Relative errors are also tabulated.


10.5772/39441 ◽  
2010 ◽  
Author(s):  
Marco Pisco ◽  
Marco Consales ◽  
Antonello Cutolo ◽  
Patrizia Aversa ◽  
Michele Penza ◽  
...  

2020 ◽  
pp. 1-1
Author(s):  
Boyao Li ◽  
Yifei Zhao ◽  
Yifan Zhang ◽  
Aoyan Zhang ◽  
Xiangzhuo Li ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document