Synthesis of Sr2KNb5O15 Thin Films by Chemical Solution Deposition Method

1999 ◽  
Vol 14 (4) ◽  
pp. 1495-1502 ◽  
Author(s):  
Wataru Sakamoto ◽  
Toshinobu Yogo ◽  
Takae Kuroyanagi ◽  
Shin-ichi Hirano

Crack-free and transparent Sr2KNb5O15 (SKN) thin films have been synthesized by the chemical solution deposition method. A homogeneous and stable precursor solution was prepared via controlling the reaction of metal alkoxides. SKN precursor was found to be the complex alkoxide between Sr[Nb(OEt)6]2 and KNb(OEt)6 with high structural symmetry. SKN powders and thin films on fused silica substrates directly crystallized to the polycrystalline tetragonal tungsten bronze phase at 600 °C. Highly oriented SKN thin films with the tetragonal tungsten bronze phase were fabricated on MgO(100) and Pt(100)/MgO(100) substrates. Two crystal lattice planes of SKN were intergrown at an orientation of 18.5° on MgO(100). The dielectric constant of SKN thin films on Pt(100)/MgO(100) was about 590 at 20 °C at 1 kHz.

1999 ◽  
Vol 14 (10) ◽  
pp. 4004-4010 ◽  
Author(s):  
J. H. Kim ◽  
F. F. Lange

Epitaxial PbZr0.5Ti0.5O3 (PZT) thin films were grown on (001) LaAlO3 substrates (∼6.1% lattice mismatch) by the chemical solution deposition method. The sequence of epitaxy during heating between 375 and 700 °C/1h was characterized by x-ray diffraction and transmission electron microscopy. At approximately 375 °C/1h, a nanocrystalline metastable fluorite phase of PZT was formed from the pyrolyzed amorphous precursor. At higher temperatures (400–425 °C/1h), thermodynamically stable PZT crystallites were first observed at the interface; with increasing higher temperatures, these nuclei grew across the interface and through the film toward the surface by consuming the metastable nanocrystalline fluorite grains. PZT thin films annealed above ∼500 °C/1h were observed to be dense with an epitaxial orientation relationship of [100](001)PZT‖[100](001)LAO. The metastable nanocrystalline fluorite to the stable single-crystal perovskite transformation gives an extra driving force by providing an additional decrease in free energy in addition to a driving force from the elimination of grain boundary area for epitaxy.


Sign in / Sign up

Export Citation Format

Share Document