scholarly journals Korelasi Antara Kecepatan Gelombang Geser dan NSPT di Area Pulau Nuklir, Tapak RDE Serpong

2021 ◽  
Vol 23 (2) ◽  
Author(s):  
Eko Rudi Iswanto ◽  
Theo Alvin Ryanto ◽  
Hadi Suntoko

Karakteristik gerakan tanah akibat gempabumi dipengaruhi oleh variasi nilai kecepatan gelombang geser (Vs). Ketersediaan nilai Vs suatu daerah belum tentu lengkap dan siap, hal ini disebabkan oleh penyelidikan langsung guna memperoleh nilai Vs memerlukan waktu relatif lama dan biaya yang tidak sedikit. Selain itu juga dipengaruhi oleh tingkat keterjangkauan suatu daerah pengujian. Berbeda halnya dengan data jumlah pukulan (N) dari uji Standard Penetration Test (NSPT) yang lebih banyak tersedia. Dewasa ini telah banyak dilakukan penelitian persamaan korelasi nilai Vs dari data NSPT, meskipun demikian tingkat keandalan antara satu dengan lainnya tidaklah sama. Studi ini bertujuan mengembangkan korelasi yang reliabel antara Vs dan NSPT untuk kategori semua jenis tanah. Metode yang digunakan adalah dengan mengumpulkan dan menganalisis data hasil pengujian geofisika dan geoteknik kemudian melakukan analisis regresi non-linear. Dari hasil perhitungan diperoleh korelasi Vs = 98,759NSPT0,3101 untuk kategori semua jenis tanah di area pulau nuklir Tapak RDE, Serpong. Korelasi ini mampu memprediksi Vs dengan cukup baik dan cepat, tanpa harus melakukan pengukuran yang memerlukan biaya lebih banyak dan waktu lebih lama.

1993 ◽  
Vol 30 (1) ◽  
pp. 1-11
Author(s):  
R. Frank ◽  
H. Zervogiannis ◽  
S. Christoulas ◽  
V. Papadopoulos ◽  
N. Kalteziotis

This paper describes the behaviour of two test piles (one bored and postgrouted and one simply bored, both 31.7 m long and 0.75 m in diameter) subjected to horizontal loads. These full-scale pile tests were carried out for the actual design of the pile foundation of a pier of the Evripos cable-stayed bridge. This bridge will link the Euboea Island to mainland Greece. The two piles have already been subjected to bearing capacity tests under axial loadings. The inclinometer measurements, taken during the present tests, yielded, in particular, the deformed shape of the piles as well as the bending moments. Conclusions could be drawn for the final design of the pile foundation with respect to horizontal loadings. Furthermore, various calculation methods using p–y reaction curves for cohesionless soils have been checked: the Ménard pressuremeter method, the method of the American Petroleum Institute recommendations, and the Standard penetration test method of Christoulas. These pile tests show that simple measurements, taken on construction sites, can yield interesting results on the actual behaviour of horizontally loaded piles. Key words : pile, horizontal loading, full-scale test, horizontal loads, bending moment, subgrade reaction modulus, p–y curve, cohesionless soil, Standard penetration test, pressuremeter test.


2013 ◽  
Vol 50 (7) ◽  
pp. 793-800 ◽  
Author(s):  
Edgar Giovanny Diaz-Segura

The range of variation of the bearing capacity factor, Nγ, was assessed using 60 estimation methods for rough footings on sand subjected to static vertical loading. The influence on the Nγ values of the use of correlations for the estimation of the friction angle, [Formula: see text], derived from in situ tests was also assessed. The analysis shows a marked dependency on the methods used to determine Nγ, showing differences for the same [Formula: see text] values of up to 267% between estimated values. Uncertainty in the estimation of [Formula: see text], due to the use of correlations with in situ tests, leads to a range of variation for Nγ higher than that seen using the 60 estimation methods. Finally, given the regular use of the in situ standard penetration test (SPT) on sands, and based on a series of analyses using finite elements, a simplified method in terms of the SPT N-values is proposed for estimation of Nγ in footings on sands.


2016 ◽  
Vol 78 (8-6) ◽  
Author(s):  
Rose Nadia ◽  
Rosli Saad ◽  
Nordiana Muztaza ◽  
Nur Azwin Ismail ◽  
Mohd Mokhtar Saidin

In this study, correlation is made between seismic P-wave velocities (Vp) with standard penetration test (SPT-N) values to produce soil parameter estimation for engineering site applications. A seismic refraction tomography (SRT) line of 69 m length was spread across two boreholes with 3 m geophones spacing. The acquired data were processed using Firstpix, SeisOpt2D and surfer8 software. The Vp at particular depths were pinpointed and correlated with geotechnical parameters (SPT-N values) from the borehole records. The correlation between Vp and SPT-N values has been established. For cohesive soils, it is grouped into three categories according to consistencies; stiff, very stiff and hard, having velocity rangesof 575-314 m/s, 808-1483 m/s and 1735-2974 m/s, respectively. For non-cohesive soils, it is also divided into three categories based on the denseness as loose, medium dense and dense with Vp ranges of 528-622 m/s, 900-2846 m/s and 2876-2951 m/s, respectively


2007 ◽  
Vol 44 (12) ◽  
pp. 1462-1473 ◽  
Author(s):  
Mohammad Rezania ◽  
Akbar A. Javadi

In this paper, a new genetic programming (GP) approach for predicting settlement of shallow foundations is presented. The GP model is developed and verified using a large database of standard penetration test (SPT) based case histories that involve measured settlements of shallow foundations. The results of the developed GP model are compared with those of a number of commonly used traditional methods and artificial neural network (ANN) based models. It is shown that the GP model is able to learn, with a very high accuracy, the complex relationship between foundation settlement and its contributing factors, and render this knowledge in the form of a function. The attained function can be used to generalize the learning and apply it to predict settlement of foundations for new cases not used in the development of the model. The advantages of the proposed GP model over the conventional and ANN based models are highlighted.


Sign in / Sign up

Export Citation Format

Share Document