Abstract
We carried out 3D finite‐difference (FD) simulations (<4 Hz) of regional wave propagation for the 2009 North Korea nuclear explosion and compared the synthetics with instrument‐corrected records at stations INCN and TJN in South Korea. The source is an isotropic explosion with a moment magnitude of 4.1. Synthetics computed in the relatively smooth Sandia/Los Alamos National Laboratory SALSA3D (SAndia LoS Alamos 3D) velocity model significantly overpredict Rayleigh‐wave amplitudes by more than an order of magnitude while underpredicting coda amplitudes. The addition to SALSA3D of a von Karman distribution of small‐scale heterogeneities with correlation lengths of ∼1000 m, a Hurst number of 0.1, and a horizontal‐to‐vertical anisotropy of ∼5 produces synthetics in general agreement with the data. The best fits are obtained from models with a gradient in the strength of the velocity and density perturbations and strong scattering (10%) limited to the top 7.5–10 km of the crust. Deeper scattering tends to decrease the initial P‐wave amplitudes to levels much below those for the data, a critical result for methods discriminating between explosive and earthquake sources. In particular, the amplitude at the onset of Pn can be affected by as little as 2% small‐scale heterogeneity in the lower crust and upper mantle. Simulations including a constant Q of 200 (INCN) to 350 (TJN) below 1 Hz and a power‐law Q(f) formulation at higher frequencies, with an exponent of 0.3, generate synthetics in best agreement with the data. In our simulations, very limited scattering contribution from the near‐source area accumulates along the regional path.
Seismic Monitoring of the North Korea Nuclear Test Site Using a Multichannel Correlation Detector