Assessment of Inflow Boundary Conditions for RANS Simulations of Neutral ABL and Wind Turbine Wake Flow

Author(s):  
Linlin Tian ◽  
Chunling Zhu ◽  
Weijun Zhu ◽  
Ning Zhao
Author(s):  
Peng Zhou ◽  
Xiuling Wang

This research focuses on the computational fluid dynamics simulation of near wind turbine wake. Three dimensional wind turbine model is built based on S809 airfoil data [1]. Three different turbulence models are used and compared. They are Realizable k-ε model, SST k-ω model, and Large Eddy Simulation (LES) model. The simulation results from different turbulence models are compared with the NREL Phase VI experiment data. Different boundary conditions, including neutral and unstable conditions, were adopted in the simulation to analyze their influence on wake flow. Updraft and downdraft are considered in this part. Overall numerical results match well with the experiment data. The discussion also compares wind turbine wake under different atmospheric boundary conditions.


2018 ◽  
Vol 32 (12n13) ◽  
pp. 1840038 ◽  
Author(s):  
Lin-Lin Tian ◽  
Ning Zhao ◽  
Yi-Lei Song ◽  
Chun-Ling Zhu

This work is devoted to perform systematic sensitivity analysis of different turbulence models and various inflow boundary conditions in predicting the wake flow behind a horizontal axis wind turbine represented by an actuator disc (AD). The tested turbulence models are the standard k–[Formula: see text] model and the Reynolds Stress Model (RSM). A single wind turbine immersed in both uniform flows and in modeled atmospheric boundary layer (ABL) flows is studied. Simulation results are validated against the field experimental data in terms of wake velocity and turbulence intensity.


Energies ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 4026 ◽  
Author(s):  
Tian ◽  
Song ◽  
Zhao ◽  
Shen ◽  
Wang

The Reynolds-averaged Navier–Stokes (RANS)-based generalized actuator disc method along with the Reynolds stress model (AD/RANS_RSM) is assessed for wind turbine wake simulation. The evaluation is based on validations with four sets of experiments for four horizontal-axis wind turbines with different geometrical characteristics operating in a wide range of wind conditions. Additionally, sensitivity studies on inflow profiles (representing isotropic and anisotropic turbulence) for predicting wake effects are carried out. The focus is on the prediction of the evolution of wake flow in terms of wind velocity and turbulence intensity. Comparisons between the computational results and the measurements demonstrate that in the near and transition wake region with strong anisotropic turbulence, the AD/RANS_RSM methodology exhibits a reasonably good match with all the experimental data sets; however, in the far wake region that is characterized by isotropic turbulence, the AD/RANS_RSM predicts the wake velocity quite accurately but appears to over-estimate the wake turbulence level. While the introduction of the overall turbulence intensity is found to give an improved agreement with the experiments. The performed sensitivity study proves that the anisotropic inflow condition is recommended as the profile of choice to represent the incoming wind flow.


2018 ◽  
Vol 875 ◽  
pp. 94-99
Author(s):  
Jia Yi Jin ◽  
Pavlo Sokolov ◽  
Muhammad S. Virk

This paper describes a case study of wind resource assessment in cold climate region. One-year SCADA data from a wind park has been used to make a comparison with the Computational Fluid Dynamics (CFD) based numerical simulations of wind resource assessment and Annual Energy Production (AEP). To better understand the wind turbine wake flow effects on the energy production, ‘Jessen wake model ‘is used for the numerical simulations. Results show wind resource maps at different elevations, where wind turbine wake flow effects the wind turbine performance and resultant power production. CFD simulations provided a good insight of the flow behavior across each wind turbine, which helped to better understand the wind turbine wake flow effects on wind turbine performance and annual energy production. A good agreement is found between numerical simulations and field SCADA data analysis in this study.


2021 ◽  
Vol 926 ◽  
Author(s):  
Aliza Abraham ◽  
Luis A. Martínez-Tossas ◽  
Jiarong Hong

The current study uses large eddy simulations to investigate the transient response of a utility-scale wind turbine wake to dynamic changes in atmospheric and operational conditions, as observed in previous field-scale measurements. Most wind turbine wake investigations assume quasi-steady conditions, but real wind turbines operate in a highly stochastic atmosphere, and their operation (e.g. blade pitch, yaw angle) changes constantly in response. Furthermore, dynamic control strategies have been recently proposed to optimize wind farm power generation and longevity. Therefore, improved understanding of dynamic wake behaviours is essential. First, changes in blade pitch are investigated and the wake expansion response is found to display hysteresis as a result of flow inertia. The time scales of the wake response to different pitch rates are quantified. Next, changes in wind direction with different time scales are explored. Under short time scales, the wake deflection is in the opposite direction of that observed under quasi-steady conditions. Finally, yaw changes are implemented at different rates, and the maximum inverse wake deflection and time scale are quantified, showing a clear dependence on yaw rate. To gain further physical understanding of the mechanism behind the inverse wake deflection, the streamwise vorticity in different parts of the wake is quantified. The results of this study provide guidance for the design of advanced wake flow control algorithms. The lag in wake response observed for both blade pitch and yaw changes shows that proposed dynamic control strategies must implement turbine operational changes with a time scale of the order of the rotor time scale or slower.


Author(s):  
Antonio Neiva ◽  
Vanessa Guedes ◽  
Caio Leandro Suzano Massa ◽  
Daniel Davy Bello de Freitas

Sign in / Sign up

Export Citation Format

Share Document