Research on Fractured Horizontal Wells Productivity and Productivity Influence in Shale Gas Reservoir

The implementation of horizontal wells is a key to economic development of the deep shale gas reservoir. In order to optimize the key parameters for drilling, stimulation, and the production system, the development effect of a horizontal well in deep shale gas formations was investigated from various aspects in this study. The drilling, fracturing, and production performances of this well were analyzed combining with the geological characteristics. The main technical problems and key factors that restrict the gas well performance and estimated ultimate recovery (EUR) were clarified. Through the integrated study of geology and engineering, the optimization strategies for increasing gas production and EUR are provided. The Z2 area, where the Z2-H1 well is located, has good reservoir physical properties, which bring a high drilling efficiency. However, there are still some problems during its development, such as poor fracture extension both horizontally and vertically, limited stimulated reservoir volume (SRV), rapid production declining, large water production, and serious liquid accumulation. In this study, a comprehensive approach was proposed that can improve single-well production and EUR by optimizing the target position, horizontal section length, pathway, spacing, new drilling and fracturing technology, and production system.

Download Full-text

A New Simulation Approach to Model Complex Fracture Networks in the Shale Formation Considering Gas Desorption

10.20944/preprints201609.0007.v1 ◽

2016 ◽

Author(s):

Xinfang Ma

Keyword(s):

Shale Gas ◽

Horizontal Wells ◽

Production Performance ◽

Natural Fracture ◽

Fracture System ◽

Gas Reservoir ◽

Fine Grid ◽

Stimulated Reservoir Volume ◽

Shale Gas Reservoir ◽

Reservoir Volume

Hydraulic fracturing in shale gas reservoirs has usually resulted in complex fracture network. The results of micro-seismic monitoring showed that the nature and degree of fracture complexity must be clearly understood to optimize stimulation design and completion strategy. This is often called stimulated reservoir volume (SRV). In the oil & gas industry, stimulated reservoir volume has made the shale gas exploitation and development so successful, so it is a main technique in shale gas development. The successful exploitation and development of shale gas reservoir has mainly relied on some combined technologies such as horizontal drilling, multi-stage completions, innovative fracturing, and fracture mapping to engineer economic completions. Hydraulic fracturing with large volumes of proppant and fracturing fluids will not only create high conductivity primary fractures but also stimulate adjacent natural fractures. Fracture network forming around every hydraulic fracture yields a stimulated reservoir volume. A model of horizontal wells which was based on a shale gas reservoir after volume fracturing in China was established to analyze the effect of related parameters on the production of multi-fractured horizontal wells in this paper. The adsorbed gas in the shale gas reservoir is simulated by dissolved gas in the immobile oil. The key to simulate SRV is to accurately represent the hydraulic fractures and the induced complex natural fracture system. However, current numerical simulation methods, such as dual porosity modeling, discrete modeling, have the following limitations: 1) time-consuming to set up hydraulic and natural fracture system; 2) large computation time required. In this paper, the shape of the stimulated formation is described by an expanding ellipsoid. Simplified stimulated zones with higher permeability were used to model the hydraulic fracture and the induced complex natural fracture system. In other words, each primary fracture has an enhanced zone, namely SRV zone. This method saves much developing fine-grid time and computing time. Compared with the simulation results of fine-grid reference model, it has shown that this simplified model greatly decreases simulation time and provides accurate results. In order to analyze the impacts of related parameters on production, a series of simulation scenarios and corresponding production performance were designed. Optimal design and analyses of fracturing parameters and the formation parameters have been calculated in this model. Simulation results showed that the number of primary fractures, half length, SRV half-width and drop-down have great effects on the post-fracturing production. Formation anisotropies also control the production performance while the conductivity of the primary fractures and SRV permeability do not have much impact on production performance. The complexity of stimulated reservoir volume has strong effect on gas well productivity. Fracture number mainly affects the early time production performance. The increase of SRV width cannot enlarge the drainage area of the multi-fractured horizontal wells, but it can improve the recovery in its own drainage region. Permeability anisotropies have much effect on production rate, especially the late time production rate. The results prove that horizontal well with volume fracturing plays an irreplaceable role in the development of ultra-low permeability shale gas reservoir.

Download Full-text