Analyzing the characteristics of rock brittleness in low-permeability mudstone and shale (MS) formations is imperative for efficient hydraulic fracturing stimulation. Rock brittleness depends on the mineral composition, organic matter abundance, and bedding structure. Based on the MS from Shahejie Formation mineral composition (clay mineral, felsic mineral, and calcareous mineral contents), total organic content, and bedding structure (laminated, laminar, and massive), six types of lithofacies were identified: clay-rich MS, felsic-rich MS, calcareous-rich MS, clay MS, felsic MS, and calcareous MS. The quartz, feldspar, calcite, and dolomite of the Shahejie Formation are brittle minerals. Consequently, lithofacies with high felsic and calcareous mineral contents are more brittle. In addition, laminated and laminar MS are also conducive to hydraulic fracturing. Therefore, laminated, organic-rich, and calcareous-rich MS are the dominant lithofacies for hydraulic fracturing in the Shahejie Formation. The lithofacies and brittleness index were predicted by the response characteristics between mineral compositions and logging curves. The 3521–3552 m section of well B11x is dominated by calcareous-rich MS with developed laminae, representing a favorable section for hydraulic fracturing. Fragile minerals and oil are widely developed in the lower part of the lower 1st member of the Shahejie Formation (Es1L) in the southwestern part of Zhaohuangzhuang-Suning, where hydraulic fracturing can be used to increase shale oil production.
An analytical model for describing sequential initiation and simultaneous propagation of multiple fractures in hydraulic fracturing shale oil/gas formations
