Summary
Steam-assisted gravity drainage is the method of choice to extract bitumen from Athabasca oil-sand reservoirs in Western Canada. Under reservoir conditions, bitumen is immobile because of high viscosity, and its typically high level of saturation limits the injectivity of steam. In current industry practice, steam is circulated within injection and production wells. Operators keep the steam circulating until mobile bitumen breaks through the producer and communication is established between the injector and the producer. The “startup” phase is a time-consuming process taking three or more months with no oil production. A variety of processes could be used to minimize the length of the startup phase, such as electromagnetic (EM) heating in either the induction (medium frequency) or radio-frequency ranges. Knowledge of the size of the hot zone formed by steam circulation and of the benefits of simultaneous EM-heating techniques increases understanding of the startup process and helps to minimize startup duration. The aim of the present work is to introduce an analytical model to predict startup duration for steam circulation with and without EM heating. Results reveal that resistive (electrothermal) heating with/without brine injection cannot be a preferable method for mobilizing the bitumen in startup phase. Induction slightly decreases startup time at frequencies smaller than 10 kHz, and at 100 kHz it can reduce startup time to less than two months.
Pore-by-pore capillary pressure measurements using X-ray microtomography at reservoir conditions: Curvature, snap-off, and remobilization of residual CO2