Effect of surface elasticity on stress intensity factors near mode-III crack tips

2019 ◽  
Vol 14 (1) ◽  
pp. 43-60 ◽  
Author(s):  
Xian-Fang Li
Ultrasonics ◽  
1983 ◽  
Vol 21 (2) ◽  
pp. 57-64 ◽  
Author(s):  
A.V. Clark ◽  
R.B. Mignogna ◽  
R.J. Sanford

1979 ◽  
Vol 46 (3) ◽  
pp. 618-624 ◽  
Author(s):  
F. Delate ◽  
F. Erdogan

The problem of an elastic plate containing a through crack and subjected to twisting moments or transverse shear loads is considered. By using a bending theory which allows the satisfaction of the boundary conditions on the crack surface regarding the normal and the twisting moments and the transverse shear load separately, it is found that the resulting asymptotic stress field around the crack tip becomes identical to that given by the elasticity solutions of the plane strain and antiplane shear problems. The problem is solved for uniformly distributed or concentrated twisting moment or transverse shear load and the normalized Mode II and Mode III stress-intensity factors are tabulated. The results also include the effect of the Poisson’s ratio and material orthotropy for specially orthotropic materials on the stress-intensity factors.


1981 ◽  
Vol 48 (3) ◽  
pp. 539-542 ◽  
Author(s):  
J. D. Achenbach ◽  
R. J. Brind

Elastodynamic Mode I and Mode II stress-intensity factors are presented for a subsurface crack in an elastic half space. The plane of the crack is normal to the surface of the half space. The half space is subjected to normal and tangential time-harmonic surface tractions. Numerical results show the variation of KI and KII at both crack tips, with the dimensionless frequency and the ratio a/b, where a and b are the distances to the surface from the near and the far crack tips, respectively. The results are compared with corresponding results for a crack in an unbounded solid.


2011 ◽  
Vol 214 ◽  
pp. 192-196 ◽  
Author(s):  
Al Emran Ismail ◽  
Ahmad Kamal Ariffin ◽  
Shahrum Abdullah ◽  
Mariyam Jameelah Ghazali ◽  
Ruslizam Daud

This study presents a numerical investigation on the stress intensity factors (SIF), K of surface cracks in round bars that were obtained under pure torsion loadings or mode III. ANSYS finite element analysis (FEA) was used to determine the SIFs along the crack front of surface cracks embedded in the solid circular bars. 20-node isoparametric singular elements were used around the crack tip by shifting the mid-side node ¼-position close to a crack tip. Different crack aspect ratio, a/b were used ranging between 0.0 to 1.2 and relative crack depth, a/D were ranged between 0.1 to 0.6. Mode I SIF, KI obtained under bending moment was used to validate the proposed model and it was assumed this proposed model validated for analyzing mode III problems. It was found that, the mode II SIF, FII and mode III SIF, FIII were dependent on the crack geometries and the sites of crack growth were also dependent on a/b and a/D.


For a non-pathological bimaterial in which an interface crack displays no oscillatory behaviour, it is observed that, apart possibly from the stress intensity factors, the structure of the near-tip field in each of the two blocks is independent of the elastic moduli of the other block. Collinear interface cracks are analysed under this non-oscillatory condition, and a simple rule is formulated that allows one to construct the complete solutions from mode III solutions in an isotropic, homogeneous medium. The general interfacial crack-tip field is found to consist of a two-dimensional oscillatory singularity and a one-dimensional square root singularity. A complex and a real stress intensity factors are proposed to scale the two singularities respectively. Owing to anisotropy, a peculiar fact is that the complex stress intensity factor scaling the oscillatory fields, however defined, does not recover the classical stress intensity factors as the bimaterial degenerates to be non-pathological. Collinear crack problems are also formulated in this context, and a strikingly simple mathematical structure is identified. Interactive solutions for singularity-interface and singularity interface-crack are obtained. The general results are specialized to decoupled antiplane and in-plane deformations. For this important case, it is found that if a material pair is non-pathological for one set of relative orientations of the interface and the two solids, it is non-pathological for any set of orientations. For bonded orthotropic materials, an intuitive choice of the principal measures of elastic anisotropy and dissimilarity is rationalized. A complex-variable representation is presented for a class of degenerate orthotropic materials. Throughout the paper, the equivalence of the Lekhnitskii and Stroh formalisms is emphasized. The article concludes with a formal statement of interfacial fracture mechanics for anisotropic solids.


Sign in / Sign up

Export Citation Format

Share Document