scholarly journals ACOUSTİC SİGNATURE OF FOUR CUTTERS EV BURNER USİNG PİLOT İNJECTOR FUEL SHİFT

Author(s):  
Mustafa Osama ◽  
H. Ayoub ◽  
Ahmed Emara ◽  
Adel Hussein ◽  
Hany Moneib ◽  
...  
Keyword(s):  
Author(s):  
В. В. Руденко ◽  
И. В. Калужинов ◽  
Н. А. Андрущенко

The presence in operation of many prototypes of UAVs with propeller propellers, the use of such devices at relatively low altitudes and flight speeds makes the problem of noise reduction from UAVs urgent both from the point of view of acoustic imperceptibility and ecology.The aim of the work is to determine a set of methods that help to reduce the visibility of UAVs in the acoustic range. It is shown that the main source of noise from the UAV on the ground is the power plant, which includes the engine and the propeller. The parameters of the power plants influencing the processes that determine the acoustic signature of the UAV were investigated. A comprehensive analysis of the factors affecting visibility was carried out. The power plants include two-stroke and four-stroke engines, internal combustion and two-blade propellers. The use of silencers on the exhaust of the internal combustion engine was considered. The spectral characteristics of the acoustic fields of the propeller-driven power plants for the operating sample of the UAV "Eco" were obtained. The measurements were carried out in one-third octave and 1/48 octave frequency bands under static conditions. The venue is the KhAI airfield. Note that the propellers that were part of the power plants operated at Reynolds numbers (Re0,75<2*105), which can significantly affect its aerodynamic and acoustic characteristics. It is shown that when choosing a UAV control system, one should take into account the fact that two-stroke piston engines are the dominant source in the noise of propeller-driven control systems in the absence of a hood and mufflers in the intake and exhaust tracts. The use of a four-stroke internal combustion engine significantly reduces the noise of the control system. In the general case, the position of the boundaries of the zone of acoustic visibility of a UAV at the location of the observer is determined by the ratio between the intensity of acoustic radiation perceived by the observer from the UAV and the intensity of sound corresponding to the natural acoustic background and depends on the degree of manifestation of acoustic effects accompanying the propagation of sound in a turbulent atmosphere - the refraction of sound waves. Absorption and dissipation of acoustic energy. The calculation and comparison of the UAV detection range was carried out taking into account the existing natural maskers.The results of experimental studies are presented that allow assessing the degree of acoustic signature of the UAV. A set of measures aimed at reducing the intensity of the acoustic signature of the UAV in various regions of the radiation spectrum has been determined.


2020 ◽  
Vol 53 (3) ◽  
pp. 283-288
Author(s):  
Muhammad Atayyab Shahid ◽  
Tariq Mairaj Khan ◽  
Kevin Lontin ◽  
Kanza Basit ◽  
Muhammad Khan

Author(s):  
Daniel Guyot ◽  
Thiemo Meeuwissen ◽  
Dieter Rebhan

Reducing gas turbine emissions and increasing their operational flexibility are key targets in today’s gas turbine market. In order to further reduce emissions and increase the operational flexibility of its GT24, Alstom has introduced an internally staged premix system into the GT24’s EV combustor. This system features a rich premix mode for GT start-up and a lean premix mode for GT loading and baseload operation. The fuel gas is injected through two premix stages, one injecting fuel into the burner air slots and one injecting fuel into the centre of the burner cone. Both premix stages are in continuous operation throughout the entire operating range, i.e. from ignition to baseload, thus eliminating the previously used pilot operation during start-up with its diffusion-type flame and high levels of NOx formation. The staged EV combustion concept is today a standard on the current GT26 and GT24. The EV burners of the GT26 are identical to the GT24 and fully retrofittable into existing GT24 engines. Furthermore, engines operating only on fuel gas (i.e. no fuel oil operation) no longer require a nitrogen purge and blocking air system so that this system can be disconnected from the GT. Only minor changes to the existing GT24 EV combustor and fuel distribution system are required. This paper presents validation results for the staged EV burner obtained in a single burner test rig at full engine pressure, and in a GT24 field engine, which had been upgraded with the staged EV burner technology in order to reduce emissions and extend the combustor’s operational behavior.


2015 ◽  
Author(s):  
K. Chen ◽  
D. Zhu ◽  
A. D. Hill
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document