scholarly journals Analysis of some uranium oxide and mixed-oxide lattice measurements. Final report

1978 ◽  
Author(s):  
R. Sher ◽  
S. Fiarman
Keyword(s):  
Mixed Oxide ◽  
Uranium Oxide ◽  
Final Report

scholarly journals Radioactivity in mixed oxide fabrication using LWR recycle plutonium. Final report

1977 ◽  
Author(s):  
V. O. Uotinen ◽  
J. L. Harrison ◽  
C. S. Caldwell ◽  
J. M. Kerr ◽  
C. R. Woods
Keyword(s):  
Mixed Oxide ◽  
Final Report

scholarly journals PHASE RELATIONSHIPS IN THE SYSTEM URANIUM OXIDE-LANTHANUM OXIDE. Final Report--Metallurgy Program 9.2.8

1963 ◽  
Author(s):  
D.C. Hill ◽  
J.H. Handewerk ◽  
R.J. Beals
Keyword(s):  
Uranium Oxide ◽  
Lanthanum Oxide ◽  
Final Report ◽  
Phase Relationships

scholarly journals Feasibility Study of Thorium-Plutonium Mixed Oxide Assembly In Light Water Reactors

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
S. S. Mustafa ◽  
E. A. Amin
Keyword(s):  
Mixed Oxide ◽  
Cycle Length ◽  
Uranium Oxide ◽  
Uranium Isotopes ◽  
Light Water Reactors ◽  
Reactor Operation ◽  
Operating Cycle ◽  
Light Water ◽  
Water Reactors ◽  
Power Flattening

Abstract Thorium-plutonium mixed oxide, (Th,Pu)OX, is currently used as an alternative fuel in the light water reactors in the world. The main objective of this paper is not only to show the benefits of using the thorium, but mainly to study how the way thorium is introduced in the fuel affects the neutron parameters. Among these benefits is the possibility of extending the operating cycle length and the reduction of the increasing stockpiles of plutonium. The first investigated method is introducing thorium as (Th,Pu)OX. The second one is a homogeneous model of thorium plutonium oxide. It is carried out by adding an amount of plutonium separated from the uranium oxide cycle at 50 GWd/ton of heavy metal to the same amount of thorium. Thus, we studied three assemblies; the reference assembly is uranium oxide of 4.2% enrichment containing borated water as a moderator of concentration 500 ppm (part per million) of B-10. The second is a (Th,Pu)OX and the third one is an assembly with homogenized thorium plutonium. All three assemblies are modeled using MCNPX. A comparison is held between the results of the three lattices. The factors compared are the effective multiplication factor, the inventory of plutonium and uranium isotopes, and the depletion of B-10, the pin by pin power distribution at 0 and 60 GWd/ton and the relative pin radial power for the three lattices. The comparison is aimed to show the effect on the cycle length, the reduction in the Pu content and the power flattening across the assembly. It is found that the evolution of the multiplication factors shows a similar behaviour using (Th-Pu)OX fuel in the assembly as UOX cycle inspite of lowering the K-eff of fresh (Th-Pu)OX fuel (1.19847). The power flattening which is favorable in reactor operation is clearer in (Th,Pu)OX fuel. It is noticed that the mass of Pu-239 decreases by 1.07% from its initial value at the end of life. For homogeneous (Th,Pu)OX, the mass decreases by 0.0832%. The high power peaking factor for (Th,Pu)OX is not expected to cause significant effects during reactor operation but it can be reduced by adding burnable poisons.

scholarly journals MIS High-Purity Plutonium/Uranium Oxide Hydride Product 5501407 (SSR129): Final Report

2019 ◽  
Author(s):  
Douglas Kirk Veirs ◽  
Mary Ann Stroud ◽  
Max Martinez ◽  
Alex Carrillo ◽  
John M. Berg ◽  
...  
Keyword(s):  
High Purity ◽  
Uranium Oxide ◽  
Final Report

Vapor Pressure Measurements on Liquid Uranium Oxide and (U,Pu) Mixed Oxide

1989 ◽  
Vol 101 (1) ◽  
pp. 26-40 ◽  
Author(s):  
W. Breitung ◽  
K. O. Reil
Keyword(s):  
Vapor Pressure ◽  
Mixed Oxide ◽  
Uranium Oxide ◽  
Pressure Measurements ◽  
Vapor Pressure Measurements
Sign in / Sign up

Export Citation Format

Share Document