Recommendations for the shallow-crack fracture toughness testing task within the HSST (Heavy-Section Steel Technology) Program

The fracture process of energy pipelines can be described in terms of fracture initiation, stable fracture propagation and final fracture or fracture arrest. Each of these stages, and the final fracture mode (leak or rupture), are directly impacted by the tendency towards brittle or ductile behavior that line pipe steels have the capacity to exhibit. Vintage and modern low carbon steels, such as those used to manufacture energy pipelines, exhibit a temperature-dependent transition from ductile-to-brittle behavior that affects the fracture behavior. There are numerous definitions of fracture toughness in common usage, depending on the stage of the fracture process and the behavior or fracture mode being evaluated. The most commonly used definitions in engineering fracture analysis of pipelines with cracks or long-seam weld defects are related to fracture initiation, stable propagation or final fracture. When choosing fracture toughness test data for use in engineering Fracture Mechanics-based assessments of energy pipelines, it is important to identify the stage of the fracture process and the expected fracture behavior in order to appropriately select test data that represent equivalent conditions. A mismatch between the physical fracture event being modeled and the chosen experimental fracture toughness data can result in unreliable predictions or overly conservative results. This paper presents a description of the physical fracture process, behavior and failure modes that pipelines commonly exhibit as they relate to fracture toughness testing, and their implications when evaluating cracks and cracks-like features in pipelines. Because pipeline operators, and practitioners of engineering Fracture Mechanics analyses, are often faced with the challenge of only having Charpy fracture toughness available, this paper also presents a review of the various correlations of Charpy toughness data to fracture toughness data expressed in terms of KIC or JIC. Considerations with the selection of an appropriate correlation for determining the failure pressure of pipelines in the presence of cracks and long-seam weld anomalies will be discussed.

Equipment for fracture toughness testing of specimen at low temperatures

Strength of Materials ◽

10.1007/bf01528568 ◽

1988 ◽

Vol 20 (5) ◽

pp. 698-702

Author(s):

I. D. Abushenkov ◽

A. I. Alekseev ◽

V. Ya. Il'ichev ◽

N. I. Mokryi ◽

A. I. Telegon ◽

...

Keyword(s):

Fracture Toughness ◽

Low Temperatures ◽

Fracture Toughness Testing ◽

Toughness Testing

Fracture toughness testing of metal matrix composites

Engineering Fracture Mechanics ◽

10.1016/0013-7944(88)90151-8 ◽

1988 ◽

Vol 30 (5) ◽

pp. 565-577 ◽

Cited By ~ 13

Author(s):

Nikos Tsangarakis ◽

John Nunes ◽

John M. Slepetz

Keyword(s):

Fracture Toughness ◽

Metal Matrix Composites ◽

Metal Matrix ◽

Matrix Composites ◽

Fracture Toughness Testing ◽

Toughness Testing