scholarly journals WIPP/SRL (Waste Isolation Pilot Plant/Savannah River Laboratory) in-situ tests: MIIT (Materials Interface Interactions Tests) program---Glass/metal interfaces of SRS waste glass

1989 ◽  
Author(s):  
J Covington, Jr ◽  
G Wicks
1997 ◽  
Author(s):  
D.E. Munson ◽  
D.L. Hoag ◽  
D.A. Blankenship ◽  
W.F. DeYonge ◽  
D.M. Schiermeister ◽  
...  

1991 ◽  
Vol 257 ◽  
Author(s):  
G.G. Wicks ◽  
A.R. Lodding ◽  
P.B. Macedo ◽  
D.E. Clark

ABSTRACTThe first field tests conducted in the United States involving burial of simulated high-level waste [HLW] forms and package components, were started in July of 1986. The program, called the Materials Interface Interactions Test or MIIT, is the largest cooperative field-testing venture in the international waste management community. Included in the study are over 900 waste form samples comprising 15 different systems supplied by 7 countries. Also included are approximately 300 potential canister or overpack metal samples along with more than 500 geologic and backfill specimens. There are almost 2000 relevant interactions that characterize this effort which is being conducted in the bedded salt site at the Waste Isolation Pilot Plant (WIPP), near Carlsbad, New Mexico. The MIIT program represents a joint endeavor managed by Sandia National Laboratories in Albuquerque, N.M., and Savannah River Laboratory in Aiken, S.C. and sponsored by the U.S. Department of Energy. Also involved in MIIT are participants from various laboratories and universities in France, Germany, Belgium, Canada, Japan, Sweden, the United Kingdom, and the United States. In July of 1991, the experimental portion of the 5-yr. MIIT program was completed. Although only about 5% of all MIIT samples have been assessed thus far, there are already interesting findings that have emerged. The present paper will discuss results obtained for SRS 165/TDS waste glass after burial of 6 mo., 1 yr. and 2 yrs., along with initial analyses of 5 yr. samples.


1993 ◽  
Vol 333 ◽  
Author(s):  
Pierre Ph. Van Iseghem

ABSTRACTThe actual status of an in-situ test programme exposing different waste glass samples directly to Boom clay is reviewed. Corrosion test tubes have been retrieved after residence for 5 years at 16° C, 2 years at 90° C, and 5 years at 170° C. The corrosion is interpreted in terms of mass loss, surface analysis by SEM and profiling by EPMA and SIMS. At 16° C, glasses dissolve about 0.02 – 0.08 µm per year. At higher temperature dissolution is more than two orders of magnitude larger. A good agreement is obtained between the mass losses and the surface analyses. The advantages and limitations of the Belgian in-situ tests are compared with the conclusions of an international expert group.


Sign in / Sign up

Export Citation Format

Share Document