Pour Point Depressants and Viscosity Index Improvers for Lubricating Oil: A Mini-Review

2018 ◽  
Vol 10 (2) ◽  
pp. 97-105
Author(s):  
Guolin Jing ◽  
Xudong Bian ◽  
Baohua Zhang ◽  
Ziyi Tu ◽  
Zhengnan Sun
Keyword(s):  
Pour Point ◽  
Viscosity Index ◽  
Lubricating Oil ◽  
Pour Point Depressants ◽  
Viscosity Index Improvers

Jojoba modified polymers as performance modifiers additives for engine oil

2015 ◽  
Vol 67 (5) ◽  
pp. 425-433 ◽  
Author(s):  
Nehal S. Ahmed ◽  
Amal M. Nassar ◽  
Rabab M. Nasser
Keyword(s):  
Vinyl Acetate ◽  
Pour Point ◽  
Viscosity Index ◽  
Vinyl Pyrrolidone ◽  
Proton Nuclear Magnetic Resonance ◽  
Engine Oil ◽  
Lubricating Oil ◽  
Content Type ◽  
Pour Point Depressants ◽  
Viscosity Index Improvers

Purpose – The purpose of this paper is to prepare novel types of copolymers and terpolymers depending on jojoba, and using them as additives for lubricating oil. Design/methodology/approach – Copolymerization of 1 mole of jojoba with 2 moles of vinyl acetate and copolymerization of 1 mole of jojoba with 2 moles of vinyl pyrrolidone were carried out. Then, two series of terpolymers were prepared by reacting (jojoba: vinyl acetate: alkylacrylate) and (jojoba: vinyl pyrrolidone: alkylacrylate), using free radical chain addition polymerization. Elucidation of the prepared polymers was carried out by using Fourier transform infrared spectroscopy, proton nuclear magnetic resonance and gel permeation chromatography, for determination of weight average molecular weight. The thermal stability of the prepared polymers was determined. The prepared polymers were evaluated as viscosity index improvers and pour point depressants for lubricating oil. Findings – It was found that the viscosity index increases with increasing the alkyl chain length of alkylacrylate. The effect of the monomer type was studied, and it was found that the polymers depending on vinyl acetate have great effect as viscosity index improvers and pour point depressants for lubricating oil. Originality/value – The polymerization of jojoba as different copolymers and terpolymers was carried out. The great influence of the prepared additives on modification of the viscosity properties and pour point of the oil was observed.

Synthesis and Evaluation of Some Polymeric Compounds as Pour Point Depressants and Viscosity Index Improvers for Lube Oil

2008 ◽  
Vol 26 (12) ◽  
pp. 1390-1402 ◽  
Author(s):  
N. S. Ahmed ◽  
A. M. Nassar ◽  
R. M. Nasser ◽  
A. F. Khattab ◽  
A.-A. A. Abdel-Azim
Keyword(s):  
Pour Point ◽  
Viscosity Index ◽  
Polymeric Compounds ◽  
Pour Point Depressants ◽  
Viscosity Index Improvers

Multifunctional Additives Viscosity Index Improvers, Pour Point Depressants and Dispersants for Lube Oil

2009 ◽  
Vol 27 (1) ◽  
pp. 20-32 ◽  
Author(s):  
A. A. A. Abdel Azim ◽  
A. M. Nasser ◽  
N. S. Ahmed ◽  
A. F. El Kafrawy ◽  
R. S. Kamal
Keyword(s):  
Pour Point ◽  
Viscosity Index ◽  
Multifunctional Additives ◽  
Pour Point Depressants ◽  
Viscosity Index Improvers

scholarly journals Effects of Acid Washing and Additives on Qualities of Waste Lubricating Oil

1970 ◽  
Vol 43 (4) ◽  
pp. 529-536
Author(s):  
M Naimul Haque ◽  
M Yunus Miah ◽  
S Ali Ashruf ◽  
M Rafiqul Islam ◽  
A Kumar Das
Keyword(s):  
Pour Point ◽  
Environmental Problem ◽  
Economic Effect ◽  
Viscosity Index ◽  
Maximum Yield ◽  
Lubricating Oil ◽  
Acid Washing ◽  
Different Types ◽  
Fuller’S Earth ◽  
Tga Analysis

Waste lubricating oil has been reclaimed by treatment with commercial sulphuric acid followed by adsorption on fuller's earth. A maximum yield (75%) of reclaimed oil at acid- oil ratio of 10:100 with addition of 10% (w/v) fuller's earth has been obtained. Properties of reclaimed oil such as viscosity index, pour point, colour etc. have been improved from 93.4, +2, 5.0 to 109, -10.5, 4.0 by addition of certain proportion of additives. TGA analysis of waste lubricating oil, reclaimed oil and fresh lubricating oil has also been studied. The reclaimed oil obtained after addition of different types of additives is very comparable to SAE 30 grade lubricating oil in terms of properties and is applicable as a standard lubricant. Such a reuse of waste lubricating oil, in addition to its economic effect will help to reduce environmental problem. Key words: Lubricating oil, TGA analysis, Envirormentl problem and Vscosity index.      doi: 10.3329/bjsir.v43i4.2243 Bangladesh J. Sci. Ind. Res. 43(4), 529-536, 2008

Sign in / Sign up

Export Citation Format

Share Document