Effect of High Frequency Preheating on Plasma Welding Speed for SUS304 Tube. Study on Increase of Welding Speed in High Energy Density Fusion Welding. (1st Report).

Abstract High-frequency responsive electrochemical capacitor (EC), which can convert alternating current (AC) in the circuit to direct current (DC), is an ideal filtering capacitor with lightweight superiority to replace the bulky aluminum electrolytic capacitor (AEC). However, current electrodes are difficult to achieve high energy density and high-frequency response properties simultaneously, primarily due to the electrode structure dilemmas of maximizing the electrode area or accelerating the ion transport. Herein, strictly vertical graphene arrays (SVGAs) directly prepared by electric-field-assisted plasma enhanced chemical vapor deposition have been successfully designed as the main electrode material of ECs to ensure the ions rapidly adsorb/desorb within the richly available surface spaces. The SVGAs exhibit an excellent specific areal capacitance of 1.72 mF‧cm− 2 at Φ120 = 80.6° even after 500,000 cycles in the aqueous ECs, which is far better than that of most quasi-vertical electrodes and carbon-related materials. Impressively, the output voltage could also be improved to 2.5 V when using the organic electrolyte, and an ultra-high energy density of 4.75 mF‧V2‧cm− 2 at Φ120 = 80.6° can also be handily achieved. Moreover, both aqueous and organic ECs-SVGAs can well smooth arbitrary AC waveforms into DC signals, indicating that ECs-SVGAs have colossal potentials to replace outmoded AECs.

Download Full-text

Theoretical Design and Screening Potential High Energy Density Materials: Combination of 1,2,4-oxadiazole and 1,3,4-oxadiazole Rings

Физика горения и взрыва ◽

10.15372/fgv20190504 ◽

2019 ◽

Keyword(s):

Energy Density ◽

High Energy ◽

High Energy Density ◽

Theoretical Design ◽

High Energy Density Materials

Download Full-text

Evaluation of High Energy Density Plasma in Counter-facing Plasma Focus Device driven by Laser Triggered Pulse Power System

IEEJ Transactions on Fundamentals and Materials ◽

10.1541/ieejfms.137.564 ◽

2017 ◽

Vol 137 (10) ◽

pp. 564-569

Author(s):

Tatsuya Sodekoda ◽

Hajime Kuwabara ◽

Shotaro Kittaka ◽

Kazuhiko Horioka

Keyword(s):

Energy Density ◽

Power System ◽

Plasma Focus ◽

High Energy ◽

Pulse Power ◽

Plasma Focus Device ◽

High Energy Density ◽

Density Plasma

Download Full-text

A HIGH ENERGY DENSITY ZINC/OXYGEN BATTERY SYSTEM

10.2514/6.1966-2324 ◽

1966 ◽

Author(s):

S. CHODOSH ◽

E. KATSOULIS ◽

M. ROSANSKY

Keyword(s):

Energy Density ◽

High Energy ◽

High Energy Density ◽

Battery System

Download Full-text

Efficient Co-Harvesting of Solar Energy and Low-Grade Heat by Molecular Photoswitches for High Energy Density, Long-Term Stable Solar Thermal Battery

10.26434/chemrxiv.9730694.v1 ◽

2019 ◽

Author(s):

Zhao-Yang Zhang ◽

Tao LI

Keyword(s):

Energy Density ◽

Solar Energy ◽

High Performance ◽

High Energy ◽

Solar Thermal ◽

High Energy Density ◽

Low Grade ◽

Thermal Battery ◽

Low Grade Heat

Solar energy and ambient heat are two inexhaustible energy sources for addressing the global challenge of energy and sustainability. Solar thermal battery based on molecular switches that can store solar energy and release it as heat has recently attracted great interest, but its development is severely limited by both low energy density and short storage stability. On the other hand, the efficient recovery and upgrading of low-grade heat, especially that of the ambient heat, has been a great challenge. Here we report that solar energy and ambient heat can be simultaneously harvested and stored, which is enabled by room-temperature photochemical crystal-to-liquid transitions of small-molecule photoswitches. The two forms of energy are released together to produce high-temperature heat during the reverse photochemical phase change. This strategy, combined with molecular design, provides high energy density of 320-370 J/g and long-term storage stability (half-life of about 3 months). On this basis, we fabricate high-performance, flexible film devices of solar thermal battery, which can be readily recharged at room temperature with good cycling ability, show fast rate of heat release, and produce high-temperature heat that is >20<sup> o</sup>C higher than the ambient temperature. Our work opens up a new avenue to harvest ambient heat, and demonstrate a feasible strategy to develop high-performance solar thermal battery.

Download Full-text

Efficient Co-Harvesting of Solar Energy and Low-Grade Heat by Molecular Photoswitches for High Energy Density, Long-Term Stable Solar Thermal Battery

10.26434/chemrxiv.9730694 ◽

2019 ◽

Author(s):

Zhao-Yang Zhang ◽

Tao LI

Keyword(s):

Energy Density ◽

Solar Energy ◽

High Performance ◽

High Energy ◽

Solar Thermal ◽

High Energy Density ◽

Low Grade ◽

Thermal Battery ◽

Low Grade Heat

Solar energy and ambient heat are two inexhaustible energy sources for addressing the global challenge of energy and sustainability. Solar thermal battery based on molecular switches that can store solar energy and release it as heat has recently attracted great interest, but its development is severely limited by both low energy density and short storage stability. On the other hand, the efficient recovery and upgrading of low-grade heat, especially that of the ambient heat, has been a great challenge. Here we report that solar energy and ambient heat can be simultaneously harvested and stored, which is enabled by room-temperature photochemical crystal-to-liquid transitions of small-molecule photoswitches. The two forms of energy are released together to produce high-temperature heat during the reverse photochemical phase change. This strategy, combined with molecular design, provides high energy density of 320-370 J/g and long-term storage stability (half-life of about 3 months). On this basis, we fabricate high-performance, flexible film devices of solar thermal battery, which can be readily recharged at room temperature with good cycling ability, show fast rate of heat release, and produce high-temperature heat that is >20<sup> o</sup>C higher than the ambient temperature. Our work opens up a new avenue to harvest ambient heat, and demonstrate a feasible strategy to develop high-performance solar thermal battery.

Download Full-text