scholarly journals Residual Life Evaluation Techniques for Thermal Power Plants.

1996 ◽  
Vol 65 (2) ◽  
pp. 147-153
Author(s):  
Koji Tamura
Author(s):  
Hajime Watanabe ◽  
Akihiro Kanaya ◽  
Junichi Kusumoto ◽  
Takafumi Tsurui

Japan has many aged thermal power plant facilities and some boilers in such facilities have been in operation for more than 100,000 hours, so the importance of creep residual life evaluation of components exposed to severe conditions has been increasing. Although creep residual life of such components can be evaluated by destructive methods relatively accurately, they significantly affect the component to be sampled, take a long time to carry out and are high-cost. To solve these problems, Kobe Material Testing Laboratory Co., Ltd. and Kyushu Electric Power Co., Inc. have jointly developed compact-sized and less expensive small punch creep testing equipment for accurate creep residual life evaluation. Outer dimensions of developed equipment are 660W × 335D × 807H (mm); weight is 130kg. Small punch creep test can be conducted by this testing equipment, in order to identify creep property using 8mm diameter and 0.5mm thickness specimens taken from tubes or pipes of thermal power plant facilities, and evaluate remaining life. The testing equipment is expected to improve efficiency and reduce costs to evaluate material characteristics and creep residual life for facilities in power plants and various industries.


2019 ◽  
Vol 12 (1) ◽  
pp. 22-28
Author(s):  
V. Ye. Mikhailov ◽  
S. P. Kolpakov ◽  
L. A. Khomenok ◽  
N. S. Shestakov

One of the most important issues for modern domestic power industry is the creation and further widespread introduction of solid propellant energy units for super-critical steam parameters with high efficiency (43–46%) and improved environmental parameters. This will significantly reduce the use of natural gas.At the same time, one of the major drawbacks of the operation of pulverized coal power units is the need to use a significant amount of fuel oil during start-up and shutdown of boilers to stabilize the burning of the coal torch in the variable boiler operating modes.In this regard, solid fuel TPPs need to be provided with fuel oil facilities, with all the associated problems to ensure the performance (heating of fuel oil in winter), reliability and safety. All of the above problems increase both the TPP capital construction costs, and the electricity generating cost.A practical solution to the above problems at present is the use of a plasma technology for coal torch ignition based on thermochemical preparation of fuel for combustion. The materials of the developments of JSC “NPO CKTI” on application of plasmatrons in boilers of thermal power plants at metallurgical complexes of the Russian Federation are also considered.Plasma ignition systems for solid fuels in boilers were developed by Russian specialists and were introduced at a number of coal-fi red power plants in the Russian Federation, Mongolia, North Korea, and Kazakhstan. Plasma ignition of solid fuels is widely used in China for almost 30% of power boilers.The introduction of plasma-energy technologies will improve the energy efficiency of domestic solid-fuel thermal power plants and can be widely implemented in the modernization of boilers.During the construction of new TPPs, the construction of fuel oil facilities can be abandoned altogether, which will reduce the capital costs of the construction of thermal power plants, reduce the construction footprint, and increase the TPP safety.


Sign in / Sign up

Export Citation Format

Share Document