scholarly journals Analisis Kinerja Sistem Proteksi Type M-3425A pada Generator di WHRPG PT. Semen Padang

2020 ◽  
Vol 17 (2) ◽  
pp. 81
Author(s):  
Liliana Liliana

Waste Heat Recovery Power Generation (WHRPG) adalah sebuah sistem mengkonservasi energi dan menunjang pembangunan bersih atau Clean Development Mechanism (CDM) yang merupakan implementasi dari Kyoto Protocol. Sistem ini terbukti dapat  menurunkan emisi CO2 sebesar 47.000 ton per tahun. WHRPG menggunakan generator sinkron dengan kapasitas 8,5 MW dilengkapi dengan sistem eksitasi tanpa sikat.  Pengoperasian WHRPG yang kontinyu harus didukung dengan pengoperasian generator dengan pengamanan yang optimal. Generator harus terus dilindungi dari gangguan-gangguan yang mungkin terjadi. Pengamanan Generator telah dilengkapi dengan Generator Protection Type M-3425 yang terdiri atas beberapa jenis pengamanan di dalamnya. Penelitian ini bertujuan untuk menganalisis kinerja proteksi pada generator khususnya terhadap gangguan tegangan lebih dan frekuensi rendah berupa kenaikan tegangan mencapai 45% dan gangguan penurunan frekuensi mencapai 6 % . Penelitian ini mengidentifikasi ketepatan kinerja relay Over Current Relay dan  under frequency Relay dalam melaksanakan pengamanan gangguan tersebut.  Hasil pemantauan dan analisis dinyatakan bahwa kedua  relay dapat dengan cepat membaca gangguan yang terjadi, selanjutnya memberi isyarat untuk mengaktifkan lock out relay, alarm dan lampu indikator sehingga gangguanpun dengan segera dapat diatasi sehingga potensi kerusakan yang bisa terjadi  pada generator bisa diminimalisir.

Author(s):  
Tong Xing ◽  
Qingfeng Song ◽  
Pengfei Qiu ◽  
Qihao Zhang ◽  
Ming Gu ◽  
...  

GeTe-based materials have a great potential to be used in thermoelectric generators for waste heat recovery due to their excellent thermoelectric performance, but their module research is greatly lagging behind...


2017 ◽  
Vol 75 ◽  
pp. 1142-1155 ◽  
Author(s):  
K. Zeb ◽  
S.M. Ali ◽  
B. Khan ◽  
C.A. Mehmood ◽  
N. Tareen ◽  
...  

Author(s):  
Yufeng Wang ◽  
Shuai Zhao ◽  
Shien Hui ◽  
Qinxin Zhao ◽  
Qulan Zhou

During ferroalloy production, a large quantity of waste gas can be utilized to generate steam and electric power. In this paper, 4 detailed thermodynamic models of single-pressure (SP) and dual-pressure (DP) waste heat recovery power generation systems are presented, to analyze the impact of the steam pressure, steam temperature and pinch temperature difference on power generating capacity. By comparing the performance of typical systems, more reasonable thermodynamic models and their parameters are proposed. It is found that the power generation capacity of dual-pressure system is higher than that of the single-pressure system, but SP system is much simpler. Using superheated steam in deaerator reduces the efficiency of heat recovery power generation systems by 1.8%. The fluctuation of waste gas source affects the power generation greatly. It should be considered when more reasonable ranges for the main parameters are required. With the improvement of thermodynamic system and parameter optimization, the gross power is increased by 15% for SP system and 17% for DP system, corresponding to the steam parameters of 3.0MPa/400°C and 6.0MPa/400°C.


Sign in / Sign up

Export Citation Format

Share Document