scholarly journals Synthesis of hydrocarbon fuels via selective reforming of kerosene over various Ni/zeolite catalysts

2021 ◽  
Vol 66 (4) ◽  
pp. 189-204
Author(s):  
Elham Saidi ◽  
◽  
Mahmoud Ziarati ◽  
Khandan Nahid ◽  
Hossein Dehghani ◽  
...  
2012 ◽  
Vol 550-553 ◽  
pp. 109-113 ◽  
Author(s):  
Ling Jun Zhu ◽  
Shu Rong Wang ◽  
Xin Li ◽  
Qian Qian Yin ◽  
Xin Bao Li

Hydrocarbon fuels produced from methanol was investigated over HZSM-5 zeolite catalysts with different Si/Al ratio. About 40% of hydrocarbon yield can be obtained under the identical reaction condition over the catalysts. HZSM-5 catalyst with lower Si/Al ratio has slightly higher oil yield and less olefin content in gas products, which can be ascribed to the stronger acidity in the catalyst favorable for the conversion of intermediates to aromatics. In addition, a small amount of dimethyl ether (DME) was detected when using HZSM-5 zeolite catalyst with Si/Al ratio of 38, indicating that the intermediates from preliminary methanol reaction not sufficiently convert.


Author(s):  
G. McMahon ◽  
T. Malis

As with all techniques which are relatively new and therefore underutilized, diamond knife sectioning in the physical sciences continues to see both developments of the technique and novel applications.Technique Developments Development of specific orientation/embedding procedures for small pieces of awkward shape is exemplified by the work of Bradley et al on large, rather fragile particles of nuclear waste glass. At the same time, the frequent problem of pullout with large particles can be reduced by roughening of the particle surface, and a proven methodology using a commercial coupling agent developed for glasses has been utilized with good results on large zeolite catalysts. The same principle (using acid etches) should work for ceramic fibres or metal wires which may only partially pull out but result in unacceptably thick sections. Researchers from the life sciences continue to develop aspects of embedding media which may be applicable to certain cases in the physical sciences.


2017 ◽  
Vol 68 (1) ◽  
pp. 116-120
Author(s):  
Iuliean Vasile Asaftei ◽  
Neculai Catalin Lungu ◽  
Lucian Mihail Birsa ◽  
Ioan Gabriel Sandu ◽  
Laura Gabriela Sarbu ◽  
...  

The conversion of n-heptanes into aromatic hydrocarbons benzene, toluene and xylenes (BTX), by the chromatographic pulse method in the temperature range of 673 - 823K was performed over the HZSM-5 and Ag-HZSM-5 zeolites modified by ion exchange with AgNO3 aqueous solutions. The catalysts, HZSM-5 (SiO2/Al2O3 = 33.9), and Ag-HZSM-5 (Ag1-HZSM-5 wt. % Ag1.02, Ag2-HZSM-5 wt. % Ag 1.62; and Ag3-HZSM-5 wt. % Ag 2.05 having different acid strength distribution exhibit a conversion and a yield of aromatics depending on temperature and metal content. The yield of aromatic hydrocarbons BTX appreciably increased by incorporating silver cations Ag+ into HZSM-5.


2002 ◽  
Author(s):  
Jeffrey D. Mills
Keyword(s):  

2001 ◽  
Author(s):  
Jeffrey D. Mills
Keyword(s):  

2020 ◽  
Vol 56 (6) ◽  
pp. 655-669
Author(s):  
A. A. Vasil’ev ◽  
V. A. Vasil’ev

Fuel ◽  
2019 ◽  
Vol 242 ◽  
pp. 438-446 ◽  
Author(s):  
Zhan Gao ◽  
Xinyao Zou ◽  
Zhen Huang ◽  
Lei Zhu

Sign in / Sign up

Export Citation Format

Share Document