scholarly journals Optimization of Sodium Lignosulfonate Treatment on Nylon Fabric Using Box–Behnken Response Surface Design for UV Protection

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Arun Kumar Singh Gangwar ◽  
D B Shakyawar ◽  
Mukesh Kumar Singh ◽  
Prashant Vishnoi ◽  
Seiko Jose
Keyword(s):  
Response Surface ◽  
Uv Protection ◽  
Response Surface Design ◽  
Sodium Lignosulfonate ◽  
Surface Design ◽  
Nylon Fabric

Graphical Abstract

Defluoridation of drinking water by magnesium and aluminum electrocoagulation in continuous flow-rate: A response surface design.

2021 ◽  
pp. 1-37
Author(s):  
Ana Gabriela Sierra-Sánchez ◽  
Verónica Martínez-Miranda ◽  
Elia Alejandra Teutli-Sequeira ◽  
Ivonne Linares-Hernández ◽  
Guadalupe Vázquez-Mejía ◽  
...  
Keyword(s):  
Drinking Water ◽  
Response Surface ◽  
Flow Rate ◽  
Continuous Flow ◽  
Response Surface Design ◽  
Surface Design

A comparison of missing Value Estimation Methods for Response Surface Design

2022 ◽  
Vol 32 (4) ◽  
Author(s):  
Natchaya Ratasukharom ◽  
Boonorm Chomtee ◽  
Chantha Wongoutong ◽  
Sudarat Nidsunkid
Keyword(s):  
Response Surface ◽  
Estimation Methods ◽  
Response Surface Design ◽  
Missing Value ◽  
Surface Design ◽  
Value Estimation ◽  
Missing Value Estimation

Separation of Diclofenac using pseudo-emulsion hollow fiber membrane: Optimization by Box-Behnken response surface design

2019 ◽  
Vol 32 ◽  
pp. 100880 ◽  
Author(s):  
Himanshu P. Kohli ◽  
Smita Gupta ◽  
Mousumi Chakraborty
Keyword(s):  
Response Surface ◽  
Hollow Fiber ◽  
Hollow Fiber Membrane ◽  
Response Surface Design ◽  
Fiber Membrane ◽  
Surface Design

Cleaning and Bacteria Removal in Milking Systems by Alkaline Electrolyzed Oxidizing Water with Response Surface Design

2019 ◽  
Vol 62 (5) ◽  
pp. 1251-1258 ◽  
Author(s):  
Yu Liu ◽  
Chaoyuan Wang ◽  
Zhengxiang Shi ◽  
Baoming Li
Keyword(s):  
Water Treatment ◽  
Response Surface ◽  
Treatment Time ◽  
System Response ◽  
Surface Model ◽  
Response Surface Design ◽  
Surface Design ◽  
Response Surface Models ◽  
Surface Models ◽  
Bacteria Removal

Abstract. A wash cycle using an alkaline solution with a dissolved chemical detergent is a standard clean-in-place (CIP) process for cleaning milking systems. However, long-term chemical use may corrode equipment and create difficulties in wastewater treatment. This study investigated the potential for using alkaline electrolyzed oxidizing (EO) water as an alternative to alkaline chemical detergent for removal of microorganisms and adenosine triphosphate (ATP) on milking system materials. Laboratory trials were performed based on a Box-Behnken response surface design to assess the cleaning effect of alkaline EO water on three materials typically used in milking systems: stainless steel, rubber gasket, and polyvinyl chloride (PVC) hose. Results showed that alkaline EO water treatment was generally enhanced with increased treatment time, temperature, and pH, and their interaction effects were also observed in ATP removal. However, treatment time did not have a dominant role in cleaning PVC hose. Response surface models were developed to reliably predict detected microorganisms and relative light units (RLU) on the three materials after alkaline EO water treatment. Based on the response surface models, the three parameters for alkaline EO water cleaning were optimized as treatment time of 10.0 min, temperature of 61.8°C, and pH of 12, after which microorganisms and RLU were nearly undetectable. Alkaline EO water treatment with the optimized parameters had an equivalent or better cleaning ability compared to the commercial detergent, suggesting its potential as a cleaning and bacteria removal agent for milking systems. Keywords: Alkaline electrolyzed oxidizing water, Cleanliness, Milking system, Response surface model.

Correction response surface design of stiffened composite panel with a crack

1999 ◽  
Author(s):  
Roberto Vitali ◽  
Bhavani Sankar
Keyword(s):  
Response Surface ◽  
Composite Panel ◽  
Response Surface Design ◽  
Surface Design

Response surface design evaluation and comparison

2009 ◽  
Vol 139 (2) ◽  
pp. 629-641 ◽  
Author(s):  
Christine M. Anderson-Cook ◽  
Connie M. Borror ◽  
Douglas C. Montgomery
Keyword(s):  
Response Surface ◽  
Design Evaluation ◽  
Response Surface Design ◽  
Surface Design
Sign in / Sign up

Export Citation Format

Share Document