Gas Turbine Heat Transfer: Past and Future Challenges

2000 ◽  
Vol 16 (4) ◽  
pp. 583-589 ◽  
Author(s):  
Ralf Schiele ◽  
Sigmar Wittig
Keyword(s):  
Heat Transfer ◽  
Gas Turbine ◽  
Future Challenges ◽  
Gas Turbine Heat Transfer

Preface: Gas Turbine Heat Transfer

2010 ◽  
Vol 41 (8) ◽  
pp. 801-802
Keyword(s):  
Heat Transfer ◽  
Gas Turbine ◽  
Gas Turbine Heat Transfer

Build Direction Effects on Additively Manufactured Channels

2015 ◽  
Author(s):  
Jacob C. Snyder ◽  
Curtis K. Stimpson ◽  
Karen A. Thole ◽  
Dominic Mongillo
Keyword(s):  
Heat Transfer ◽  
Gas Turbine ◽  
Pressure Loss ◽  
Small Scale ◽  
Turbine Cooling ◽  
Gas Turbine Cooling ◽  
Gas Turbine Heat Transfer ◽  
Manufacturing Techniques ◽  
Traditional Manufacturing

With the advances of Direct Metal Laser Sintering (DMLS), also generically referred to as additive manufacturing, novel geometric features of internal channels for gas turbine cooling can be achieved beyond those features using traditional manufacturing techniques. There are many variables, however, in the DMLS process that affect the final quality of the part. Of most interest to gas turbine heat transfer designers are the roughness levels and tolerance levels that can be held for the internal channels. This study investigates the effect of DMLS build direction and channel shape on the pressure loss and heat transfer measurements of small scale channels. Results indicate that differences in pressure loss occur between the test cases with differing channel shapes and build directions, while little change is measured in heat transfer performance.

Gas Turbine Heat Transfer and Cooling Technology

2012 ◽  
Author(s):  
Je-Chin Han ◽  
Sandip Dutta ◽  
Srinath Ekkad
Keyword(s):  
Heat Transfer ◽  
Gas Turbine ◽  
Cooling Technology ◽  
Gas Turbine Heat Transfer

Preface: Gas Turbine Heat Transfer

2010 ◽  
Vol 41 (6) ◽  
pp. 599-600
Keyword(s):  
Heat Transfer ◽  
Gas Turbine ◽  
Gas Turbine Heat Transfer

Preface: Gas Turbine Heat Transfer

2011 ◽  
Vol 42 (2) ◽  
pp. 99-100
Keyword(s):  
Heat Transfer ◽  
Gas Turbine ◽  
Gas Turbine Heat Transfer

scholarly journals Liquid Crystal Thermography in Gas Turbine Heat Transfer: A Review on Measurement Techniques and Recent Investigations

Crystals ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 1332
Author(s):  
Srinath V. Ekkad ◽  
Prashant Singh
Keyword(s):  
Heat Transfer ◽  
Liquid Crystal ◽  
Gas Turbine ◽  
Convective Heat Transfer Coefficient ◽  
Measurement Techniques ◽  
Experimental Methods ◽  
Film Cooling Effectiveness ◽  
Performance And Emission ◽  
Liquid Crystal Thermography ◽  
Gas Turbine Heat Transfer

Liquid Crystal Thermography is a widely used experimental technique in the gas turbine heat transfer community. In turbine heat transfer, determination of the convective heat transfer coefficient (h) and adiabatic film cooling effectiveness (η) is imperative in order to design hot gas path components that can meet the modern-day engine performance and emission goals. LCT provides valuable information on the local surface temperature, which is used in different experimental methods to arrive at the local h and η. The detailed nature of h and η through LCT sets it apart from conventional thermocouple-based measurements and provides valuable insights into cooling designers for concept development and its further iterations. This article presents a comprehensive review of the state-of-the-art experimental methods employing LCT, where a critical analysis is presented for each, as well as some recent investigations (2016–present) where LCT was used. The goal of this article is to familiarize researchers with the evolving nature of LCT given the advancements in instrumentation and computing capabilities, and its relevance in turbine heat transfer problems in current times.

Numerical and Experimental Analysis of Micro Gas Turbine Heat Transfer Effect

2015 ◽  
Vol 39 (2) ◽  
pp. 153-159 ◽  
Author(s):  
Junhyuk Seo ◽  
Kilsung Kwon ◽  
Ju Chan Choi ◽  
Jehyun Baek
Keyword(s):  
Heat Transfer ◽  
Gas Turbine ◽  
Experimental Analysis ◽  
Transfer Effect ◽  
Micro Gas Turbine ◽  
Gas Turbine Heat Transfer

Build Direction Effects on Additively Manufactured Channels

2016 ◽  
Vol 138 (5) ◽  
Author(s):  
Jacob C. Snyder ◽  
Curtis K. Stimpson ◽  
Karen A. Thole ◽  
Dominic Mongillo
Keyword(s):  
Heat Transfer ◽  
Gas Turbine ◽  
Pressure Loss ◽  
Small Scale ◽  
Turbine Cooling ◽  
Gas Turbine Cooling ◽  
Gas Turbine Heat Transfer ◽  
Manufacturing Techniques ◽  
Traditional Manufacturing

With the advance of direct metal laser sintering (DMLS), also generically referred to as additive manufacturing (AM), novel geometric features of internal channels for gas turbine cooling can be achieved beyond those features using traditional manufacturing techniques. There are many variables, however, in the DMLS process that affect the final quality of the part. Of most interest to gas turbine heat transfer designers are the roughness levels and tolerance levels that can be held for the internal channels. This study investigates the effect of DMLS build direction and channel shape on the pressure loss and heat transfer measurements of small-scale channels. Results indicate that differences in pressure loss occur between the test cases with differing channel shapes and build directions, while little change is measured in heat transfer performance.

Preface: Gas Turbine Heat Transfer

2011 ◽  
Vol 42 (1) ◽  
pp. 1-2
Keyword(s):  
Heat Transfer ◽  
Gas Turbine ◽  
Gas Turbine Heat Transfer
Sign in / Sign up

Export Citation Format

Share Document