Effect of leading edge erosion on wind turbine rotor aerodynamics

2022 ◽  
Author(s):  
Akshay Koodly Ravishankara ◽  
Huseyin Ozdemir ◽  
Edwin van der Weide
2011 ◽  
Vol 48 (6) ◽  
pp. 647-657 ◽  
Author(s):  
Kenji Takizawa ◽  
Bradley Henicke ◽  
Darren Montes ◽  
Tayfun E. Tezduyar ◽  
Ming-Chen Hsu ◽  
...  

2020 ◽  
Author(s):  
Rodrigo Soto-Valle ◽  
Sirko Bartholomay ◽  
Joerg Alber ◽  
Marinos Manolesos ◽  
Christian Navid Nayeri ◽  
...  

Abstract. In this paper, a method to determine the angle of attack on a wind turbine rotor blade using a chordwise pressure distribution measurement was applied. The approach uses a reduced number of pressure taps data located close to the blade leading edge. The results were compared with three 3-hole probes located at different radial positions and analytical calculations. The experimental approaches are based on the 2-D flow assumption; the pressure tap method is an application of the thin airfoil theory and the 3-hole probe method uses external probe measurements and applies geometrical and induction corrections. The experiments were conducted in the wind tunnel at the Hermann Föttinger Institut of the Technische Unversität Berlin. The research turbine is a three-bladed upwind horizontal axis wind turbine model with a rotor diameter of 3 m. The measurements were carried out at rated condition with a tip speed ratio of 4.35 and different yaw and pitch angles were tested in order to compare both methods over a wide range of conditions. Results show that the pressure taps method is suitable with a similar angle of attack results as the 3-hole probes for the aligned case. When a yaw misalignment was introduced the method captures the same trend and feature of the analytical estimations. Nevertheless, it is not able to capture the tower influence. Regarding the influence of pitching the blades, a linear relationship between the angle of attack and pitch angle was found.


2012 ◽  
Vol 22 (supp02) ◽  
pp. 1230002 ◽  
Author(s):  
YURI BAZILEVS ◽  
MING-CHEN HSU ◽  
KENJI TAKIZAWA ◽  
TAYFUN E. TEZDUYAR

We provide an overview of the Arbitrary Lagrangian–Eulerian Variational Multiscale (ALE-VMS) and Space–Time Variational Multiscale (ST-VMS) methods we have developed for computer modeling of wind-turbine rotor aerodynamics and fluid–structure interaction (FSI). The related techniques described include weak enforcement of the essential boundary conditions, Kirchhoff–Love shell modeling of the rotor-blade structure, NURBS-based isogeometric analysis, and full FSI coupling. We present results from application of these methods to computer modeling of NREL 5MW and NREL Phase VI wind-turbine rotors at full scale, including comparison with experimental data.


2011 ◽  
Vol 48 (3) ◽  
pp. 333-344 ◽  
Author(s):  
Kenji Takizawa ◽  
Bradley Henicke ◽  
Tayfun E. Tezduyar ◽  
Ming-Chen Hsu ◽  
Yuri Bazilevs

Wind Energy ◽  
2009 ◽  
Vol 13 (5) ◽  
pp. 433-447 ◽  
Author(s):  
C. Sibuet Watters ◽  
S.P. Breton ◽  
C. Masson

2014 ◽  
Vol 39 ◽  
pp. 874-882 ◽  
Author(s):  
B. Rašuo ◽  
M. Dinulović ◽  
A. Veg ◽  
A. Grbović ◽  
A. Bengin

Sign in / Sign up

Export Citation Format

Share Document