scholarly journals Study on Unconstrained Compound Optimization Problem and Some Dual Problems of DC Optimization Problem with Compound Function

2020 ◽  
Keyword(s):  
Optimization Problem ◽  
Dual Problems ◽  
Dc Optimization

scholarly journals Robust strong duality for nonconvex optimization problem under data uncertainty in constraint

2021 ◽  
Vol 6 (11) ◽  
pp. 12321-12338
Author(s):  
Yanfei Chai ◽  
Keyword(s):  
Nonconvex Optimization ◽  
Optimization Problem ◽  
Conjugate Function ◽  
Strong Duality ◽  
Data Uncertainty ◽  
Abstract Convexity ◽  
Conjugate Duality ◽  
Dual Problems ◽  
Uncertain Optimization ◽  
Robust Strong Duality

<abstract><p>This paper deals with the robust strong duality for nonconvex optimization problem with the data uncertainty in constraint. A new weak conjugate function which is abstract convex, is introduced and three kinds of robust dual problems are constructed to the primal optimization problem by employing this weak conjugate function: the robust augmented Lagrange dual, the robust weak Fenchel dual and the robust weak Fenchel-Lagrange dual problem. Characterizations of inequality (1.1) according to robust abstract perturbation weak conjugate duality are established by using the abstract convexity. The results are used to obtain robust strong duality between noncovex uncertain optimization problem and its robust dual problems mentioned above, the optimality conditions for this noncovex uncertain optimization problem are also investigated.</p></abstract>

scholarly journals A new proof of the dual optimization problem and its application to the optimal material distribution of SiC/graphene composite

2020 ◽  
Vol 1 (1) ◽  
pp. 187-191
Author(s):  
Ji-Huan He ◽  
Keyword(s):  
Material Properties ◽  
Optimization Problem ◽  
Dual Problem ◽  
Direct Proof ◽  
Duality Gap ◽  
Material Distribution ◽  
Dual Problems ◽  
Graphene Composite ◽  
Stationary Conditions ◽  
Optimal Material

This paper presents a simple and direct proof of the dual optimization problem. The stationary conditions of the original and the dual problems are exactly equivalent, and the duality gap can be completely eliminated in the dual problem, where the maximal or minimal value is solved together with the stationary conditions of the dual problem and the original constraints. As an illustration, optimization of SiC/graphene composite is addressed with an objective of maximizing certain material properties under the constraint of a given strength.

Exergy and sensibility analysis of each individual effect in a kraft multiple effect evaporator

TAPPI Journal ◽  
2019 ◽  
Vol 18 (10) ◽  
pp. 607-618
Author(s):  
JÉSSICA MOREIRA ◽  
BRUNO LACERDA DE OLIVEIRA CAMPOS ◽  
ESLY FERREIRA DA COSTA JUNIOR ◽  
ANDRÉA OLIVEIRA SOUZA DA COSTA
Keyword(s):  
Optimization Problem ◽  
Real Data ◽  
Kraft Pulping ◽  
Steam Temperature ◽  
Input Flow ◽  
Transfer Coefficients ◽  
Heat Transfer Coefficients ◽  
Multiple Effect ◽  
Sensibility Analysis ◽  
Exergetic Analysis

The multiple effect evaporator (MEE) is an energy intensive step in the kraft pulping process. The exergetic analysis can be useful for locating irreversibilities in the process and pointing out which equipment is less efficient, and it could also be the object of optimization studies. In the present work, each evaporator of a real kraft system has been individually described using mass balance and thermodynamics principles (the first and the second laws). Real data from a kraft MEE were collected from a Brazilian plant and were used for the estimation of heat transfer coefficients in a nonlinear optimization problem, as well as for the validation of the model. An exergetic analysis was made for each effect individually, which resulted in effects 1A and 1B being the least efficient, and therefore having the greatest potential for improvement. A sensibility analysis was also performed, showing that steam temperature and liquor input flow rate are sensible parameters.

Imaging through Scattering Media with a Learning Based Prior

2020 ◽  
Vol 2020 (14) ◽  
pp. 306-1-306-6
Author(s):  
Florian Schiffers ◽  
Lionel Fiske ◽  
Pablo Ruiz ◽  
Aggelos K. Katsaggelos ◽  
Oliver Cossairt
Keyword(s):  
Optimization Problem ◽  
Autonomous Driving ◽  
Scattering Media ◽  
Photon Scattering ◽  
Point Spread ◽  
Spread Function ◽  
Radiative Transport Equation ◽  
Spatio Temporal ◽  
Transient Imaging

Imaging through scattering media finds applications in diverse fields from biomedicine to autonomous driving. However, interpreting the resulting images is difficult due to blur caused by the scattering of photons within the medium. Transient information, captured with fast temporal sensors, can be used to significantly improve the quality of images acquired in scattering conditions. Photon scattering, within a highly scattering media, is well modeled by the diffusion approximation of the Radiative Transport Equation (RTE). Its solution is easily derived which can be interpreted as a Spatio-Temporal Point Spread Function (STPSF). In this paper, we first discuss the properties of the ST-PSF and subsequently use this knowledge to simulate transient imaging through highly scattering media. We then propose a framework to invert the forward model, which assumes Poisson noise, to recover a noise-free, unblurred image by solving an optimization problem.

Shape Optimization of Hydraulic Structures: an Example of an Optimum Design of a Fish Passage

10.29007/2k64 ◽  
2018 ◽  
Author(s):  
Pat Prodanovic ◽  
Cedric Goeury ◽  
Fabrice Zaoui ◽  
Riadh Ata ◽  
Jacques Fontaine ◽  
...  
Keyword(s):  
Numerical Model ◽  
Shape Optimization ◽  
Objective Function ◽  
Optimum Design ◽  
Optimization Problem ◽  
A Priori ◽  
Coupled System ◽  
Fish Passage ◽  
Hydraulic Structures ◽  
Design Variables

This paper presents a practical methodology developed for shape optimization studies of hydraulic structures using environmental numerical modelling codes. The methodology starts by defining the optimization problem and identifying relevant problem constraints. Design variables in shape optimization studies are configuration of structures (such as length or spacing of groins, orientation and layout of breakwaters, etc.) whose optimal orientation is not known a priori. The optimization problem is solved numerically by coupling an optimization algorithm to a numerical model. The coupled system is able to define, test and evaluate a multitude of new shapes, which are internally generated and then simulated using a numerical model. The developed methodology is tested using an example of an optimum design of a fish passage, where the design variables are the length and the position of slots. In this paper an objective function is defined where a target is specified and the numerical optimizer is asked to retrieve the target solution. Such a definition of the objective function is used to validate the developed tool chain. This work uses the numerical model TELEMAC- 2Dfrom the TELEMAC-MASCARET suite of numerical solvers for the solution of shallow water equations, coupled with various numerical optimization algorithms available in the literature.

Sign in / Sign up

Export Citation Format

Share Document