scholarly journals Chasing "Zampanalogs": Advancing the Synthesis of the Zampanolide Macrocycle

2021 ◽  
Author(s):  
◽  
Sophie Geyrhofer

<p>(-)-Zampanolide (1), a natural product isolated from a marine sponge, is a microtubule-stabilizing agent that exhibits activity in the nanomolar range against various cancer cells, including in P-gp pump overexpressing cells. This attribute makes (-)-zampanolide an interesting target for further investigation. In this work, a new method for a modular and convergent total synthesis of optically pure zampanolide was investigated, which would also allow the generation of “zampanalogs” following the same basic strategy. Their biological activity may then be assessed to allow the elucidation of structure-activity relationships of (-)-zampanolide and its analogs in tubulin binding.  The synthetic plan consisted of the modular combination of four major fragments, which would be connected in the late stages of the synthesis and could therefore be easily exchanged to allow the generation of analogs. The C15-C16 bond would be connected via an alkynylation reaction, and a subsequent reductive methylation would install the trisubstituted alkene. The connections at C1 and C3 could be achieved through a Bestmann ylid linchpin reaction, while the macrolactonization would be completed using a ring-closing metathesis to form the C8-C9 alkene. The side chain could be attached at C20 using one of the established aza-aldol methods.  The fragments necessary for the formation of the macrocycle were synthesized successfully. The purification strategy throughout the synthetic route was rationalized and provides an improvement with respect to yield and time compared to work previously done in this research group. Alongside these fragments, modified fragments that were originally intended to serve as model systems were synthesized, which could also be used as building blocks in the synthesis of “zampanalogs”.  Several methods for a stereoselective alkynylation at C15 were tested. These led to only meager successes, so an approach using a non-stereoselective alkynylation, followed by oxidation and a stereoselective CBS-reduction, was chosen. For the installation of the trisubstituted alkene a reductive methylation with vitride was tested, but this only led to the reduction of the alkyne without methylation. This product may be employed for the synthesis of C17-desmethyl analogs. The reductive methylation at C16-C17 was ultimately achieved using the Gilman reagent in a similar manner to the installation of the C5 methyl group in the C3-C8 fragment.  A linchpin strategy with the Bestmann ylid simultaneously formed the connectivity at C1 and C3. This process was successfully performed on multiple substrates arising from the model systems used in the alkynylation and reductive methylation reactions, yielding precursors to the ring-closing metathesis and potentially enabling the synthesis of various analogs.  The ring-closing metathesis proved to be difficult in analogs lacking the C17 methyl group and cis-tetrahydropyran ring, and due to this tendency further investigations are necessary. Once the macrocycle has been closed, a global deprotection and oxidation of hydroxy groups is necessary to allow for the installation of the sidechain.</p>

2021 ◽  
Author(s):  
◽  
Sophie Geyrhofer

<p>(-)-Zampanolide (1), a natural product isolated from a marine sponge, is a microtubule-stabilizing agent that exhibits activity in the nanomolar range against various cancer cells, including in P-gp pump overexpressing cells. This attribute makes (-)-zampanolide an interesting target for further investigation. In this work, a new method for a modular and convergent total synthesis of optically pure zampanolide was investigated, which would also allow the generation of “zampanalogs” following the same basic strategy. Their biological activity may then be assessed to allow the elucidation of structure-activity relationships of (-)-zampanolide and its analogs in tubulin binding.  The synthetic plan consisted of the modular combination of four major fragments, which would be connected in the late stages of the synthesis and could therefore be easily exchanged to allow the generation of analogs. The C15-C16 bond would be connected via an alkynylation reaction, and a subsequent reductive methylation would install the trisubstituted alkene. The connections at C1 and C3 could be achieved through a Bestmann ylid linchpin reaction, while the macrolactonization would be completed using a ring-closing metathesis to form the C8-C9 alkene. The side chain could be attached at C20 using one of the established aza-aldol methods.  The fragments necessary for the formation of the macrocycle were synthesized successfully. The purification strategy throughout the synthetic route was rationalized and provides an improvement with respect to yield and time compared to work previously done in this research group. Alongside these fragments, modified fragments that were originally intended to serve as model systems were synthesized, which could also be used as building blocks in the synthesis of “zampanalogs”.  Several methods for a stereoselective alkynylation at C15 were tested. These led to only meager successes, so an approach using a non-stereoselective alkynylation, followed by oxidation and a stereoselective CBS-reduction, was chosen. For the installation of the trisubstituted alkene a reductive methylation with vitride was tested, but this only led to the reduction of the alkyne without methylation. This product may be employed for the synthesis of C17-desmethyl analogs. The reductive methylation at C16-C17 was ultimately achieved using the Gilman reagent in a similar manner to the installation of the C5 methyl group in the C3-C8 fragment.  A linchpin strategy with the Bestmann ylid simultaneously formed the connectivity at C1 and C3. This process was successfully performed on multiple substrates arising from the model systems used in the alkynylation and reductive methylation reactions, yielding precursors to the ring-closing metathesis and potentially enabling the synthesis of various analogs.  The ring-closing metathesis proved to be difficult in analogs lacking the C17 methyl group and cis-tetrahydropyran ring, and due to this tendency further investigations are necessary. Once the macrocycle has been closed, a global deprotection and oxidation of hydroxy groups is necessary to allow for the installation of the sidechain.</p>


1994 ◽  
Vol 42 (11) ◽  
pp. 2241-2250 ◽  
Author(s):  
Nobutaka FUJII ◽  
Kazuo NAKAI ◽  
Hiromu HABASHITA ◽  
Yuka HOTTA ◽  
Hirokazu TAMAMURA ◽  
...  

Author(s):  
Satoru Arimitsu ◽  
Gerald B Hammond

gem-Difluoro-1,7-enyne amides are suitable building blocks for the synthesis of difluorodihydropyridinones via a ring-closing metathesis reaction, and of 4,4-difluoro-3-oxoisoquinolines through a ring-closing metathesis–enyne metathesis tandem reaction. These products, in turn, undergo a Diels–Alder reaction to yield heterotricyclic systems in moderate to good yields.


Author(s):  
Miguel-Ángel Velázquez-Carmona ◽  
Sylvain Bernès ◽  
Francisco Javier Ríos-Merino ◽  
Yasmi Reyes Ortega

The here crystallized oxamide was previously characterized as an unsolvated species [Jímenez-Pérezet al.(2000).J. Organomet. Chem.614–615, 283–293], and is now reported with methanol as a solvent of crystallization, C30H44N2O4·CH3OH, in a different space group. The introduction of the solvent influences neither the molecular symmetry of the oxamide, which remains centrosymmetric, nor the molecular conformation. However, the unsolvated molecule crystallized as an ordered system, while many parts of the solvated crystal are disordered. The hydroxy group in the oxamide is disordered over two chemically equivalent positions, with occupancies 0.696 (4):0.304 (4); onetert-butyl group is disordered by rotation about the C—C bond, and was modelled with three sites for each methyl group, each one with occupancy 1/3. Finally, the methanol solvent, which lies on a twofold axis, is disordered by symmetry. The disorder affecting hydroxy groups and the solvent of crystallization allows the formation of numerous supramolecular motifs using four hydrogen bonds, with N—H and O—H groups as donors and the oxamide and methanol molecule as acceptors.


1996 ◽  
Vol 61 (10) ◽  
pp. 3375-3387 ◽  
Author(s):  
Alberto Arnone ◽  
Pierfrancesco Bravo ◽  
Silvia Capelli ◽  
Giovanni Fronza ◽  
Stefano V. Meille ◽  
...  

1999 ◽  
Vol 52 (4) ◽  
pp. 259 ◽  
Author(s):  
Heribert Dollt ◽  
Volker Zabel

Various new chiral building blocks could easily be prepared from optically pure cis and trans ethyl 3-(1′,3′- dioxolan-4′-yl)aziridine-2-carboxylates. A stereochemically pure 1,3-dioxolan in the allyl position of an α-bromoacrylate induced a high (3R*,4′S*) selectivity in the Michael addition with an amine. After oxygen at the inducing centre was exchanged with nitrogen bearing a bulky substituent, the directing influence of this new group was examined. Solvent effects influencing the cis/trans ratio of aziridine formation are discussed.


Author(s):  
B. Panchapakesan ◽  
Kousik Sivakumar ◽  
Shaoxin Lu

Manipulation and control of matter at the nano- and atomic level are crucial for the success of nano-scale sensors and actuators. The ability to control and synthesize multilayer structures using carbon nanotubes that will enable to build electronic devices within a nanotube is still in its infancy. In this paper, we present results on selective electric field assisted deposition of metals on carbon nanotubes realizing metallic nanowire structures. Silver and platinum nanowires has been fabricated using this approach due to its applications in chemical sensing sensing as catalytic materials to sniff toxic agents and in the area of biomedical nanotechnology for construction of artificial muscles. The electric field assisted technique allows the deposition of metals with high degree of selectivity on carbon nanotubes by manipulating the charges on the surface of the nanotubes. The thickness and the growth of the nanowires was altered by inducing defects on the initial surface of the nanotubes that affected the local current densities and electrochemical reduction of silver and platinum on those defect sites. SEM and TEM investigations revealed silver and platinum nanowires between 10 nm-100 nm in diameter. Relatively higher metal deposition was achieved in defect related sites or places where the nanotubes criss-crossed each other, due to the high current densities in these sites. The present technique is versatile and enables the fabrication of host of different types of metallic and semiconduting nanowires using carbon nanotube templates for nanoelectronics and myriad of sensor applications. Further, nanowires can also serve as model systems for studying quantum size effects in these dimensions.


ChemInform ◽  
2010 ◽  
Vol 25 (51) ◽  
pp. no-no
Author(s):  
J. S. LINDSEY ◽  
S. PRATHAPAN ◽  
T. E. JOHNSON ◽  
R. W. WAGNER

2005 ◽  
Vol 4 ◽  
pp. 37-44 ◽  
Author(s):  
J. B. Gregersen ◽  
P. J. A. Gijsbers ◽  
S. J. P. Westen ◽  
M. Blind

Abstract. Information &amp; Communication Technology (ICT) tools such as computational models are very helpful in designing river basin management plans (rbmp-s). However, in the scientific world there is consensus that a single integrated modelling system to support e.g. the implementation of the Water Framework Directive cannot be developed and that integrated systems need to be very much tailored to the local situation. As a consequence there is an urgent need to increase the flexibility of modelling systems, such that dedicated model systems can be developed from available building blocks. The HarmonIT project aims at precisely that. Its objective is to develop and implement a standard interface for modelling components and other relevant tools: The Open Modelling Interface (OpenMI) standard. The OpenMI standard has been completed and documented. It relies entirely on the "pull" principle, where data are pulled by one model from the previous model in the chain. This paper gives an overview of the OpenMI standard, explains the foremost concepts and the rational behind it.


Sign in / Sign up

Export Citation Format

Share Document