A new model of dynamic recovery for Stage III of pure fcc metals without cross slip

Author(s):  
Ali S. Argon
2002 ◽  
Vol 731 ◽  
Author(s):  
Masato Hiratani ◽  
Hussein M. Zbib

AbstractA stochastic model is proposed to study dislocation dynamics in metallic single crystals. A Langevin type thermal fluctuation is taken into account for the model to maintain thermal equilibrium. This approach works as Brownian motion of segmental dislocations. Additionally, a new model for implementing the cross slip mechanism in FCC metals is developed based on results obtained by atomistic simulations. This new model is capable of simulating realistic thermal processes such as thermally activated dislocation motion during easy glide or cross slip during cold working of metals.


2008 ◽  
Vol 100 (23) ◽  
Author(s):  
E. Bitzek ◽  
C. Brandl ◽  
P. M. Derlet ◽  
H. Van Swygenhoven
Keyword(s):  

2021 ◽  
Vol 22 (1) ◽  
Author(s):  
Yoshiaki Kinoshita ◽  
Takato Ikeda ◽  
Takuto Miyamura ◽  
Yusuke Ueda ◽  
Yuji Yoshida ◽  
...  

Abstract Background Clinical course of pleuroparenchymal fibroelastosis (PPFE) shows considerable variation among patients, but there is no established prognostic prediction model for PPFE. Methods The prediction model was developed using retrospective data from two cohorts: our single-center cohort and a nationwide multicenter cohort involving 21 institutions. Cox regression analyses were used to identify prognostic factors. The total score was defined as the weighted sum of values for the selected variables. The performance of the prediction models was evaluated by Harrell’s concordance index (C-index). We also examined the usefulness of the gender-age-physiology (GAP) model for predicting the prognosis of PPFE patients. Results We examined 104 patients with PPFE (52 cases from each cohort). In a multivariate Cox analysis, a lower forced vital capacity (FVC [defined as FVC < 65%]; hazard ratio [HR], 2.23), a history of pneumothorax (HR, 3.27), the presence of a lower lobe interstitial lung disease (ILD) (HR, 2.31), and higher serum Krebs von den Lungen-6 (KL-6) levels (> 550 U/mL, HR, 2.56) were significantly associated with a poor prognosis. The total score was calculated as 1 × (FVC, < 65%) + 1 × (history of pneumothorax) + 1 × (presence of lower lobe ILD) + 1 × (KL-6, > 550 U/mL). PPFE patients were divided into three groups based on the prognostic score: stage I (0–1 points), stage II (2 points), and stage III (3–4 points). The survival rates were significantly different in each stage. The GAP stage was significantly associated with the prognosis of PPFE, but no difference was found between moderate (stage II) and severe (stage III) disease. Our new model for PPFE patients (PPFE Prognosis Score) showed better performance in the prediction of mortality in comparison to the GAP model (C-index of 0.713 vs. 0.649). Conclusions Our new model for PPFE patients could be useful for predicting their prognosis.


2002 ◽  
Vol 738 ◽  
Author(s):  
Oscar Rodríguez de la Fuente ◽  
Esther Carrasco ◽  
Miguel A. González ◽  
Juan M. Rojo

ABSTRACTWe present evidence for the operation on reconstructed Au(001) of a novel mechanism, involving dislocation motion, which is much more efficient than surface diffusion to redistribute mass around nanoindentations. Cross-slip of individual dislocations generated around the indentation point, with a screw component perpendicular to the surface, is shown to be responsible for the generation of multiple-storied, crystallographically-oriented terraces around the nanoindentation points. We also show that standard dislocation theory can be used to quantitatively describe the characteristics of the dislocations involved in the different processes around the nanoindentation.


2012 ◽  
Vol 1424 ◽  
Author(s):  
D.E. Stegall ◽  
M.A. Mamun ◽  
A.A. Elmustafa

ABSTRACTWe investigated the effect of stacking fault free energy (SFE), on the magnitude of the indentation size effect (ISE) of several pure FCC metals using nanoindentation. The metals chosen were 99.999% Aluminum, 99.95% Nickel, 99.95% Silver, and 70/30 Copper Zinc (α-brass). Aluminum has a high SFE of about 200 mJ/ m2, whereas α -brass has a low SFE of less than 10 mJ/ m2. Nickel and Silver have intermediate SFE of about 128 mJ/ m2 and 22 mJ/m2 respectively. The SFE is an important interfacial characteristic and plays a significant role in the deformation of FCC metals due to its influence on dislocation movement and morphology. The SFE is a measure of the distance between partial dislocations and has a direct impact on the ability of dislocations to cross slip during plastic deformation. The lower the SFE the larger the separation between partial dislocations and thus cross slip and dynamic recovery are inhibited. The SFE impacts pure metals differently from alloys. It was discovered that the characteristic ISE behavior for the pure metals was different when compared to the α-brass which is an alloy. Several additional alloys were chosen for comparison including 7075 Aluminum and 70/30 Nickel Copper.


2008 ◽  
Vol 58 (5) ◽  
pp. 389-392 ◽  
Author(s):  
Robert J Asaro ◽  
Yashashree Kulkarni

2011 ◽  
Vol 59 (19) ◽  
pp. 7135-7144 ◽  
Author(s):  
S.I. Rao ◽  
D.M. Dimiduk ◽  
T.A. Parthasarathy ◽  
J. El-Awady ◽  
C. Woodward ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document