ALUMINUM 613

Alloy Digest ◽  
1967 ◽  
Vol 16 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Impact Resistance ◽  
Natural Aging ◽  
Heat Treating ◽  
High Impact ◽  
Casting Alloy ◽  
Good Corrosion Resistance

Abstract Aluminum 613 is a natural aging casting alloy having high impact resistance, good corrosion resistance and good machinability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on casting, heat treating, machining, and joining. Filing Code: Al-169. Producer or source: Reynolds Metals Company.

AA B443.0

Alloy Digest ◽  
1986 ◽  
Vol 35 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Casting Alloy ◽  
Good Corrosion Resistance ◽  
Thin Walls ◽  
Wide Range

Abstract AA B443.0 is an aluminum-5% silicon casting alloy recommended for castings of intricate design and thin walls. It is pressure-tight and has good corrosion resistance and good ductility and toughness. Its wide range of uses include architectural, marine and ornamental components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-270. Producer or source: Various aluminum companies.

ALUMINUM B443.0

Alloy Digest ◽  
1975 ◽  
Vol 24 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Casting Alloy ◽  
Good Corrosion Resistance ◽  
Thin Walls ◽  
Wide Range

Abstract ALUMINUM B443.0 is an aluminum-5% silicon casting alloy recommended for castings of intricate design and thin walls. It is pressure-tight and has good corrosion resistance and good ductility and toughness. Its wide range of uses include architectural, marine and ornamental components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-214. Producer or source: Various aluminum companies.

BRUSH ALLOY 260-C

Alloy Digest ◽  
1968 ◽  
Vol 17 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Good Corrosion Resistance ◽  
Temperature Performance

Abstract Brush Alloy 260-C is a beryllium nickel casting alloy having high strength, hardness and good corrosion resistance. It is recommended for fuel pump impellers, turbines, non-sparking tools, molds for plastics and glass. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Ni-138. Producer or source: Brush Beryllium Company.

UNS A02080

Alloy Digest ◽  
1988 ◽  
Vol 37 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Sand Casting ◽  
Casting Alloy ◽  
Heat Treated

Abstract UNS No. A02080 is a heat-treatable casting alloy characterized by good castability, machinability and resistance to corrosion. It is produced by sand casting and is a general-purpose alloy recommended in both the as-cast and heat-treated conditions. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-286. Producer or source: Various aluminum companies.

SOLEIL C5

Alloy Digest ◽  
1995 ◽  
Vol 44 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Fresh Water ◽  
Martensitic Stainless Steel ◽  
Heat Treating ◽  
Good Corrosion Resistance

Abstract SOLEIL C5 is a 13% chromium 4% nickel martensitic stainless steel with improved toughness and good corrosion resistance to fresh water. Shafts and compressor impellers for hydraulic applications is the area of primary usage. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, and joining. Filing Code: SS-595. Producer or source: Creusot-Marrel.

ASARCO Z.D.C. No. 7

Alloy Digest ◽  
1967 ◽  
Vol 16 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Die Casting ◽  
Heat Treating ◽  
Casting Alloy

Abstract ASARCO Z.D.C. No. 7 is a zinc die casting alloy which will be found particularly helpful in casting relatively large, complicated shapes and intricate parts which are not free to shrink in the dies because of cores, slides, etc. and require a hardware finish for subsequent plating or organic finishes. This datasheet provides information on composition, physical properties, hardness, tensile properties, and compressive and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Zn-10. Producer or source: Federated Metals Corporation, ASARCO Inc..

ZAMAK-5

Alloy Digest ◽  
1992 ◽  
Vol 41 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Creep Resistance ◽  
Die Casting ◽  
Heat Treating ◽  
General Purpose ◽  
Casting Alloy

Abstract ZAMAK-5 has moderately greater hardness, strength and creep resistance than the most widely used general purpose zinc die casting alloy, ZAMAK 3 (See Alloy Digest Zn-1, September 1991). This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Zn-2. Producer or source: Noranda Sales Corporation. Originally published as Zamak-5, May 1954, revised February 1992.

RAFFMETAL EN AB-Al Si7Mg0.6 (EN AB-42200)

Alloy Digest ◽  
2021 ◽  
Vol 70 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Permanent Mold ◽  
Good Corrosion Resistance

Abstract Raffmetal EN AB-Al Si7Mg0.6 (EN AB-42200) is a heat-treatable, Al-Si-Mg casting alloy in ingot form for remelting. It is used extensively for producing sand, permanent mold, and investment castings for applications requiring a combination of excellent casting characteristics, high strength with good elongation, and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-483. Producer or source: Raffmetal S.p.A.

APEX 36

Alloy Digest ◽  
1958 ◽  
Vol 7 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Die Casting ◽  
Casting Alloy ◽  
Good Corrosion Resistance ◽  
Temperature Performance

Abstract APEX 36 is a high silicon, aluminum die casting alloy having high fluidity, excellent castability and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on high temperature performance as well as casting and machining. Filing Code: Al-66. Producer or source: Apex Smelting Company.

FEDERATED F410

Alloy Digest ◽  
1974 ◽  
Vol 23 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Sand Casting ◽  
Casting Alloy ◽  
Aerospace Applications

Abstract FEDERATED F410 is a heat-treatable aluminum sand casting alloy recommended for uses requiring high strength along with toughness and ductility. It has good machinability, fair castability, and is suitable for a number of automotive and aerospace applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-210. Producer or source: Federated Metals Corporation, ASARCO Inc..

Sign in / Sign up

Export Citation Format

Share Document